Chevron Flange-Mounted Bearings

Smoother than smooth—the balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Nickel-Plated Cast Iron Housing







				Set Screw

				1/2"	2 23/32"	2 7/16"	1 1/4"	1/2"	2,850	5,500	Steel	Sealed	3°	8260K46	000000


				5/8"	2 23/32"	2 7/16"	1 1/4"	1/2"	2,850	5,500	Steel	Sealed	3°	8260K47	00000
				3/4"	3"	2 1/2"	1 11/32"	5/16"	2,200	7,500	Steel	Sealed	2°	8260K11	000000
				7/8"	3 3/8"	2 3/4"	1 29/64"	3/8"	2,400	6,800	Steel	Sealed	2°	8260K12	000000
				15/16"	2 53/64"	2 11/16"	1 3/8"	1/2"	3,100	5,000	Steel	Sealed	3°	8260K48	00000
				15/16"	3 3/8"	2 3/4"	1 17/32"	3/8"	3,150	6,800	Steel	Sealed	2°	8260K13	000000
				1"	3 3/8"	2 3/4"	1 29/64"	3/8"	2,400	6,800	Steel	Sealed	2°	8260K14	000000
				1 1/8"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K15	000000
				1 3/16"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K16	000000
				1 1/4"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K17	000000
				1 1/4"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K18	000000


				1 5/16"	3 7/16"	3 17/32"	1 3/4"	19/32"	5,750	3,500	Steel	Sealed	3°	8260K49	00000
				1 3/8"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K19	000000
				1 7/16"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K21	000000
				1 1/2"	3 31/32"	3 15/16"	1 31/32"	5/8"	6,500	3,000	Steel	Sealed	3°	8260K51	00000
				1 5/8"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K52	00000
				1 11/16"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K53	00000
				1 3/4"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K54	00000
				1 15/16"	4 17/32"	4 13/32"	2 1/16"	23/32"	7,850	2,500	Steel	Sealed	3°	8260K55	00000
				2"	4 17/32"	4 13/32"	2 1/16"	23/32"	7,850	2,500	Steel	Sealed	3°	8260K56	00000

Food-and-Beverage Mounted Ball Bearings with Three-Bolt Flange

Packed with NSF-registered H1 grease, these bearings are safe for use on food and beverage lines. Install them into conveyors, packaging systems, and other food processing applications where contact with ingredients is rare but possible. The balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.

Lubricate your bearings regularly to keep them in tip-top shape. Seals block out dust and contaminants.

304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Polybutylene Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Closed Caps—Mount on the end of the shaft to block out debris and prevent accidental contact with rotating parts.

	Bearings													Closed Caps
			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Enclosure Rating		Each		Each
304 Stainless Steel Housing







				Set Screw

				1/2"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N11	0000000	———	0


				5/8"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N12	000000	———	0
				3/4"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N13	000000	———	0
				3/4"	2 37/64"	2 3/8"	1 5/16"	5/16"	2,250	5,900	440 Stainless Steel	Sealed	2°	—	8260K22	000000	8260K41	000000
				1"	2 23/32"	2 41/64"	1 13/32"	1/2"	2,450	5,100	440 Stainless Steel	Sealed	2°	—	8260K23	000000	8260K42	00000
				1"	2 15/16"	2 3/4"	1 27/64"	3/8"	2,650	550	440 Stainless Steel	Sealed	2.5°	IP69K	4454N14	000000	———	0
				1 1/4"	2 23/32"	3 1/8"	1 37/64"	1/2"	3,400	4,300	440 Stainless Steel	Sealed	2°	—	8260K24	000000	8260K43	00000
				1 1/4"	2 53/64"	3 35/64"	1 3/4"	1/2"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K25	000000	8260K44	00000
				1 1/4"	3 5/16"	3 1/4"	1 37/64"	3/8"	3,700	480	440 Stainless Steel	Sealed	2.5°	IP69K	4454N15	000000	———	0
				1 1/4"	3 5/8"	3 3/4"	1 53/64"	1/2"	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N16	000000	———	0
				1 7/16"	3 7/16"	3 35/64"	1 3/4"	19/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K26	000000	8260K44	00000


				1 7/16"	3 5/8"	3 3/4"	1 53/64"	1/2"	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N17	000000	———	0
				1 1/2"	3 31/32"	3 15/16"	1 1/64"	5/8"	5,100	3,300	440 Stainless Steel	Sealed	2°	—	8260K27	000000	8260K45	00000
				2"	4 9/16"	4 5/8"	2 7/32"	1/2"	6,550	240	440 Stainless Steel	Sealed	2.5°	IP69K	4454N18	000000	———	0
				20 mm	65.5 mm	64 mm	34.5 mm	8 mm	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N19	000000	———	0
				25 mm	74.6 mm	70 mm	35.1 mm	9.5 mm	2,650	550	440 Stainless Steel	Sealed	2.5°	IP69K	4454N21	000000	———	0
				30 mm	84.2 mm	83 mm	40.1 mm	9.5 mm	3,700	480	440 Stainless Steel	Sealed	2.5°	IP69K	4454N22	000000	———	0
				35 mm	92.1 mm	95 mm	46.5 mm	13 mm	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N23	000000	———	0
				50 mm	115.9 mm	118 mm	54.9 mm	13 mm	6,550	240	440 Stainless Steel	Sealed	2.5°	IP69K	4454N24	000000	———	0


				Polybutylene Housing







								Set Screw

								3/4"	3"	2 1/2"	1 21/64"	23/32"	2,250	5,900	440 Stainless Steel	Sealed	2°	—	8260K28	000000	8260K35	00000


								1"	3 3/8"	2 49/64"	1 5/8"	23/32"	2,450	5,100	440 Stainless Steel	Sealed	2°	—	8260K29	000000	8260K36	00000
								1 1/4"	3 13/16"	3 17/64"	1 5/8"	23/32"	3,400	4,300	440 Stainless Steel	Sealed	2°	—	8260K31	000000	8260K37	00000
								1 1/4"	4 5/16"	3 47/64"	1 55/64"	23/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K32	000000	8260K38	00000
								1 7/16"	4 5/16"	3 47/64"	1 55/64"	23/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K33	000000	8260K38	00000
								1 1/2"	4 5/16"	3 29/32"	2 3/64"	5/8"	5,100	3,300	440 Stainless Steel	Sealed	2°	—	8260K34	000000	8260K39	00000