Filter by
DFARS Compliance
For Tap Size
For Tap Size in Aluminum
For Tap Size in Steel
Keyless Drill Chucks with Integral Arbor
The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.
Also Available: Replacement hoods, ball bearing sets, collars, jaws sets, jaw guides, shells, and drive pins. Select 30075A6 and specify replacement part and Albrecht model number.
With Morse Taper Shank
Drill Chuck
with Morse
Taper Shank
with Morse
Taper Shank
Morse Taper | For Bit Shank Size | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number | Dia. | Inch | mm | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | |||||||||
| 2 | 0.7" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-2MT | 00000000 | 0000000 |
| 3 | 0.938" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-3MT | 00000000 | 000000 |
| 3 | 0.938" | 1/8"-5/8" | 3-16 | Steel | Steel | 4,000 | CP160-3MT | 00000000 | 000000 |
| 4 | 1.231" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-4MT | 00000000 | 000000 |
| 4 | 1.231" | 1/8"-5/8" | 3-16 | Steel | Steel | 4,000 | CP160-4MT | 00000000 | 000000 |
Replacement Parts for Keyless Drill Chucks
Ball Bearing Set
Collar
Drive Pin
Hood
Jaw Guide
Jaw Set
Shell
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 000000 |
| C160-J6 | 0000000 | 00000 |
Collar | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 00000 |
| C160-J6 | 0000000 | 00000 |
Drive Pin | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 00000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 0000000 | 00000 |
Hood | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 0000000 | 000000 |
Jaw Guide | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 0000000 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 0000000 | 000000 |
Shell | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 0000000 | 00000 |
| CP160-3MT, CP160-4MT, CP160-R8 | 0000000 | 00000 |
Morse Taper Holders for Quick-Change Lathe Tool Posts
Shown with Drill Bit (Sold Separately)
Mount any tool with a Morse taper shank to a quick-change tool post. A height-adjustment screw allows for quick and accurate adjustment of the tool height without the need for shimming. Posts and holders (sold separately) are interchangeable with systems from Aloris, Dorian, and Armstrong.
Holders | Replacement Height Adjustment Screws | ||||||
|---|---|---|---|---|---|---|---|
| For Tool Post Series | For Lathe Swing | Centerline Ht. | Overall Ht. | Each | Each | ||
Morse Taper 2 | |||||||
| AXA | 0"-10" | 3/4" | 1 1/2" | 000000000 | 0000000 | 000000000 | 000000 |
Morse Taper 3 | |||||||
| BXA | 12"-15" | 7/8" | 1 3/4" | 000000000 | 000000 | 000000000 | 00000 |
| CA | 14"-20" | 1 1/4" | 2 1/2" | 000000000 | 000000 | 000000000 | 00000 |
Morse Taper 4 | |||||||
| CA | 14"-20" | 1 1/4" | 2 1/2" | 000000000 | 000000 | 000000000 | 00000 |
Procunier Auto-Reversing Tap Holders for Straight and Morse Taper Spindles
These instantly reversing tap holders allow you to back out of a hole once it has been tapped without stopping the machine's motor. They’re also known as tapping heads. Use them for fast, precise tapping on manually operated drill presses and milling machines. Collets (sold separately) are required to connect the tap to the holder.
Morse Taper Shank
Morse Taper Shank
| Procunier Number | Morse Taper Number | For Tap Size in Aluminum | For Tap Size in Steel | Max. Speed, rpm | Material | Each | |
| 1-E | 1 | No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6 | No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No.10, No.12, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5 | 3,000 | Steel | 00000000 | 0000000 |
| 1-E | 2 | No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6 | No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No.10, No.12, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5 | 3,000 | Steel | 00000000 | 000000 |
| 2-E | 2 | No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, 1/8 Pipe | No. 6, No. 8, No.10, No.12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", M4, M4.5, M5, M6, M6.3, M7, M8 | 2,000 | Steel | 00000000 | 00000000 |
| 2-E | 3 | No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, 1/8 Pipe | No. 6, No. 8, No.10, No.12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", M4, M4.5, M5, M6, M6.3, M7, M8 | 2,000 | Steel | 00000000 | 00000000 |
| 3-E | 2 | No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, 1/4 Pipe | No.10, No.12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12 | 1,000 | Steel | 00000000 | 00000000 |
| 3-E | 3 | No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, 1/4 Pipe | No.10, No.12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12 | 1,000 | Steel | 00000000 | 00000000 |
| 4-F | 3 | 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, M18.6, M20, M20.4, M22, M22.5, M24, M26, M27, 1/4 Pipe, 3/8 Pipe, 1/2 Pipe, 3/4 Pipe | 1/4", 9/32", 5/16", 11/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, M18.6, M20, M20.4, M22, M22.5, M24 | 800 | Steel | 00000000 | 00000000 |
| 4-F | 4 | 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, M18.6, M20, M20.4, M22, M22.5, M24, M26, M27, 1/4 Pipe, 3/8 Pipe, 1/2 Pipe, 3/4 Pipe | 1/4", 9/32", 5/16", 11/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M7, M8, M9, M10, M11, M12, M12.5, M14, M15.2, M16, M18, M18.6, M20, M20.4, M22, M22.5, M24 | 800 | Steel | 00000000 | 00000000 |
Replacement Parts for Procunier Auto-Reversing Tap Holders
Clutch Assembly
Clutch Spring
Collet Nut
Spindle
Stud Nut
Wrench
| Procunier Number | Each | |
Clutch Assembly | ||
|---|---|---|
| 1-E | 00000000 | 0000000 |
| 2-E | 00000000 | 000000 |
| 3-E | 00000000 | 000000 |
| 4-F | 00000000 | 000000 |
Clutch Spring | ||
| 1-E | 00000000 | 00000 |
| 2-E | 00000000 | 00000 |
| 3-E | 00000000 | 00000 |
| 4-F | 00000000 | 00000 |
Collet Nut | ||
| 1-E | 0000000 | 00000 |
| 2-E | 0000000 | 00000 |
| 3-E | 0000000 | 00000 |
| 4-F | 0000000 | 00000 |
Spindle | ||
| 1-E | 00000000 | 000000 |
| 2-E | 00000000 | 000000 |
| 3-E | 00000000 | 000000 |
| 4-F | 00000000 | 000000 |
Stud Nut | ||
| 1-E | 00000000 | 0000 |
| 2-E, 3-E | 00000000 | 0000 |
| 4-F | 00000000 | 0000 |
Wrench | ||
| 1-E | 00000000 | 00000 |
| 2-E | 00000000 | 00000 |
| 3-E | 00000000 | 00000 |
| 4-F | 00000000 | 00000 |
Tap Holders for Drill Presses and Milling Machines
Also known as tap chucks, these fit into machines that have a Morse taper spindle.
For technical drawings and 3-D models, click on a part number.
| For Tap Size | For Tap Pipe Size | Material | Each | |
Morse Taper 2 | ||||
|---|---|---|---|---|
| __ | 1/8 | Black-Oxide Steel | 0000000 | 000000 |
| 1/4", M6, M6.3 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 5/16", M7, M8 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 3/8", M10 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 7/16" | __ | Black-Oxide Steel | 0000000 | 00000 |
| 1/2", M12, M12.5 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 9/16", M14 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 5/8", M16 | __ | Black-Oxide Steel | 0000000 | 00000 |
Morse Taper 3 | ||||
| __ | 1/4 | Black-Oxide Steel | 0000000 | 00000 |
| 1/2", M12, M12.5 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 5/8", M16 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | __ | Black-Oxide Steel | 0000000 | 00000 |
| 7/8", M22 | __ | Black-Oxide Steel | 0000000 | 00000 |
Morse Taper 4 | ||||
| __ | 1/2 | Black-Oxide Steel | 0000000 | 00000 |
| __ | 3/8 | Black-Oxide Steel | 0000000 | 00000 |
| __ | 3/4 | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | __ | Black-Oxide Steel | 0000000 | 00000 |
| 7/8", M22 | __ | Black-Oxide Steel | 0000000 | 00000 |
| 1", M25 | __ | Black-Oxide Steel | 0000000 | 00000 |