Tilting-Head Bench Vises
The head tilts, rotates, and locks in place to hold work at an angle.
Bolt-on with 1 1/2" jaw width vise has grooved jaws for clamping round and uneven workpieces.
Bolt-on with 2 1/2" jaw width vise can be mounted temporarily using a clamp-on base (sold separately).
Suction-mount vise attaches to smooth surfaces. Use the lever to engage and disengage the rubber suction pad.
Vises | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw | Overall | Mounting Holes | Clamp-On Base | Replacement Suction-Mount Base | ||||||||||||
| Wd. | Max. Opening | Texture | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Mounting Fasteners Included | No. of | Dia. | Each | Each | Each | |||
With Flat Jaws | ||||||||||||||||
Bolt-On Mount | ||||||||||||||||
| 1 1/2" | 11/16" | Grooved | 3/8" | 5" | 4" | 6 1/2" | 2 | No | 2 | 3/16" | 00000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| 2 1/2" | 2 1/4" | Smooth | 1/2" | 5" | 5" | 6 1/4" | 2.7 | No | 3 | 5/16" | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
Suction Mount | ||||||||||||||||
| 2 1/2" | 2 1/4" | Smooth | 1/2" | 6 1/4" | 4 1/2" | 6 1/4" | 2.9 | __ | __ | __ | 0000000 | 00000 | 000000 | 00 | 00000000 | 000000 |
Extra-Wide-Opening Tilting-Head Bench Vises
For large workpieces, these vises open three times as wide as standard tilting-head vises. The head tilts, rotates, and locks in place to hold your work at an angle. Vises have one smooth jaw and one grooved jaw for clamping flat, round, and uneven workpieces. The 5-lb. weighted base is heavy enough to keep the vise in place but light enough to be portable. For temporary mounting, add a clamp-on base (sold separately).
Vise with self-centering jaws has jaws that move at the same time to keep parts in the center of the vise.
Vise | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw | Overall | Clamp-On Base | |||||||||||||
| Wd. | Max. Opening | Material | Texture | Replaceable | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Base Wt., lbs. | Features | Each | Each | ||
With Flat Jaws | |||||||||||||||
| 1 1/2" | 6" | Rubber | Serrated and Grooved | Yes | 1 7/8" | 11" | 5" | 7 1/4" | 7.6 | 5 | __ | 0000000 | 0000000 | 0000000 | 000000 |
| 1 1/2" | 9" | Rubber | Serrated and Grooved | Yes | 1 7/8" | 11 1/2" | 5" | 7 1/2" | 7.7 | 5 | Self-Centering Jaws | 0000000 | 000000 | 0000000 | 00000 |
Any-Angle Tilting-Head Bench Vises
Two vise heads tilt and rotate 360°, locking in place to hold work at any angle. The arm holding the vise heads tilts 180°.
Jaw | Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Vise Heads | Wd. | Max. Opening | Material | Texture | Replaceable | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Mounting Fasteners Included | No. of | Dia. | Each | |
With Flat Jaws | |||||||||||||||
| 2 | 1 1/2" | 11/16" | Aluminum | Grooved | No | 3/8" | 5" | 4" | 6 1/2" | 3 | No | 2 | 3/16" | 00000000 | 0000000 |
Tilting-Head Circuit Board Vises
Position your circuit board at a comfortable angle when attaching components. These vises rotate, so you can access the back of your board.
Vises with soldering spool and soldering iron holders keep your material and tools nearby. The soldering spool holder feeds solder wire as your work. When you need to set down your hot iron, rest it in the holder instead of on your work surface.
Jaw | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Max. Opening | Material | Texture | For Max. Circuit Board Thick. | Rotation Range of Motion | Tilt Range of Motion | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Features | Each | |
| 2" | 2 7/8" | Plastic | Grooved | 5/16" | 360° | 210° | No | 3 | 5/16" | 2 1/2" | __ | 0000000 | 000000 |
| 6 1/4" | 10" | Aluminum | Grooved | 5/32" | 360° | 90° | No | 3 | 5/16" | 3 3/4" | Six Compartment Tray Base Solder Spool Holder Soldering Iron Holder | 0000000 | 000000 |
Static-Control Circuit Board Vises
Rotate these vises to solder both the front and back of your circuit board while preventing static charges from damaging your components. Plastic jaws slowly drain static charges away, minimizing the buildup of electrostatic discharge (ESD). To make soldering components through the holes on your board easier, these vises have a positioning arm that holds your component. This allows you to rotate the board and solder on the opposite side without you needing to hold the component.
Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Max. Opening | Material | Texture | For Max. Circuit Board Thick. | Rotation Range of Motion | Surface Resistance | Rod Material | Features | Each | |
| 1 11/16" | 9 1/4" | Plastic | Grooved | 5/16" | 360° | 109-1011 ohms | Steel | Positioning Arm | 0000000 | 000000 |
Circuit Board Vises
Use both hands to position and solder components to your circuit board. These vises keep your board stable on a flat surface.
Component positioning stands (sold separately) keep components in place as you solder them through your board.
Spring Clamp Workholders
Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly. The workholder’s arms are mounted to a base and adjust for positioning work at almost any angle.
Workholders that cannot be sold to Canada are restricted by local energy efficiency requirements.
Jaw | Base | Handle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clamp Lg. | Opening | Reach | Wd. | Type | Texture | Arm Lg. | Lg. | Wd. | Style | Material | Grip Style | Each | |
Steel Body and Jaws | |||||||||||||
| 3 1/2" | 0" to 3/8" | 3/4" | 1/8" | Fixed | Smooth | 8" | 3" | 3" | Pliers | Steel | Plain | 0000000 | 000000 |
Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Clamp Lg. | Opening | Reach | Wd. | Type | Texture | Arm Lg. | Base Dia. | Grip Style | Each | |
410 Stainless Steel Body and Jaws | ||||||||||
| 6 1/2" | 0" to 3/4" | 3" | 3/8" | Fixed | Serrated | 2" | 3" | Plain | 000000 | 000000 |
with Adjustable Arms,
Illumination and Magnification
Jaw | Handle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clamp Lg. | Opening | Reach | Wd. | Type | Texture | Arm Lg. | Magnification | Lens Dia. | Working Distance | Bulb Included | Base Dia. | Style | Material | Each | |
Plastic Body and Steel Jaws | |||||||||||||||
| 1 1/2" | 0" to 1/2" | 1/2" | 3/16" | Fixed | Serrated | 6" | 2.0X | 4 1/4" | 2"-8" | Yes | 6" | Pliers | Steel | 0000000 | 000000 |
Base | Handle | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clamp Lg. | Opening | Reach | Jaw Wd. | Arm Lg. | Magnification | Spot Lens Magnification | Lens Dia. | Working Distance | Bulb Included | Lg. | Wd. | Overall Lg. | Holding Capacity, lbs. | Style | Material | Electrical Connection Type | Cannot Be Sold To | Each | |
Plastic Body and Steel Jaws | |||||||||||||||||||
| 3" | 0" to 7/16" | 1/2" | 3/16" | 4 1/2" | 1.75X | 4.5X | 3 3/4" | 4" | Yes | 6 7/8" | 7 1/16" | 18" | 0.22 | Pliers | Steel | Plug In | Canada | 0000000 | 0000000 |
8 1/2" Arm Lg. Clamps | 12 1/2" Arm Lg. Clamps | Jaw | Base | Handle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clamp Lg. | Opening | Reach | Jaw Wd. | Clamp Lg. | Opening | Reach | Jaw Wd. | Type | Texture | Lg. | Wd. | Style | Material | Grip Style | Each | |
Steel Body and Jaws | ||||||||||||||||
| 7/8" | 0" to 7/16" | 5/8" | 1/8" | 7/8" | 0" to 5/16" | 5/8" | 3/16" | Fixed | Serrated | 9" | 6" | Pliers | Steel | Plain | 0000000 | 000000 |
Compact Push Toggle Clamps with Locking Handle
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 5/8" | 3" | Steel | 0000000 | 000000 |
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 560 | 3/4" | 1/2" | 3/4" | 3/8" | M6 | 19 mm | 1 5/8" | 3" | Steel | 0000000 | 000000 |
Compact Push/Pull Toggle Clamps
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. A pushing or pulling motion holds workpieces from the side. Clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Clamps with internally threaded plunger accommodate threaded holding screws and other threaded fixtures (not included).
Clamps with externally threaded plunger can be threaded into a fixture with a tapped hole.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 550 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 600 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Externally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Externally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | M4 | 12 mm | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
Internally Threaded Plunger—316 Stainless Steel | ||||||||||
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Electronic Component Positioning Stands
Hold components against your circuit board to keep your hands free for soldering. The arm on these stands pins your component in place with tension and has enough flexibility to keep a variety of differently sized components steady. For extra stability, the base has a layer of silicone foam to prevent slipping. As you're soldering, the heat from your iron won't melt or damage the silicone tip that’s holding your component.
Overall | Tip | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Arm Ht. | Lg. | Wd. | Ht. | Base Material | Material | Temp. Range, °F | Material | Each | |
| 1/8"-2" | 2 3/4" | 1" | 2" | Silicone Foam | Silicone Rubber | -60° to 400° | ABS Plastic | 0000000 | 00000 |