Make perfectly straight cuts in wood, plywood, and particleboard with minimal splintering. These blades fit in your track saw to cut along the precision track. They make straight and plunge cuts, so they’re good for cutting a sheet of wood into precise pieces before fabrication or construction.

When choosing a blade, you’ll want to keep in mind the number of teeth and cut width. Choose more teeth for cutting across the grain or when you want a smoother cut; choose fewer teeth for cutting with the grain (ripping) or when you want a faster cut. Blades with fewer teeth also cut thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your saw.

Cut wood, plywood, and particleboard. These blades bite into wood to make both straight and plunge cuts, so they can be used to cut lumber down to size and slice through material that’s already installed. When choosing a blade, you’ll want to keep in mind the number of teeth and width of cut. Choose more teeth for cutting across the grain; choose fewer teeth for cutting with the grain (ripping) and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.

A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile. These blades have multiple arbor diameters.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron. Use dry or with water or coolant (not included).

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry, stone, and concrete in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

Blades come with a reducer bushing to adjust the arbor diameter. Detach the center piece on the round/diamond arbor to expose the diamond shape.

Use these blades with low horsepower (under 20 hp) walk-behind flat saws. Blades come with a reducer bushing to adjust the arbor diameter. Choose a narrower width of cut for faster cuts and less material loss.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.