Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.

Cut wood, plywood, and particleboard. These blades bite into wood to make both straight and plunge cuts, so they can be used to cut lumber down to size and slice through material that’s already installed. When choosing a blade, you’ll want to keep in mind the number of teeth and width of cut. Choose more teeth for cutting across the grain; choose fewer teeth for cutting with the grain (ripping) and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.

With more than 1.5 times more teeth than a standard circular saw blade, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. Use them on wood, plywood, and particleboard. They make both straight and plunge cuts, so they can cut lumber down to size and slice through material that’s already installed.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.

A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composite and graphite. Use dry or with water or coolant (not included).

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile. Blades with multiple arbor diameters come with a reducer bushing.

Use these blades with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit. Blades with multiple arbor diameters come with a reducer bushing.