Cordless Circular Saws for Metal
Make long, straight cuts in metal anywhere on your site. These saws cut with the same power as an electric saw but don’t need to be near an outlet. They’re often used to trim panels and structural framing to size. Because they use a low speed, they make a smooth, burr-free cut and don’t require coolant. Compared to saws that use abrasive wheels to cut metal, these saws generate fewer sparks, too.
Some tools include rechargeable batteries. For other tools, batteries and chargers are sold separately.
Makita saws have a higher voltage than other cordless circular saws, which helps them maintain speed when cutting thick or hard materials. The high-voltage battery also gives you more cuts per charge. They protect against accidental starts since you have to pull the safety switch at the same time as the trigger. When you release the trigger, the brake stops the blade to let you quickly reposition your workpiece and move to your next cut. A chip collector captures metal shards and chips, so your workspace stays clean and safe.
Batteries | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | No. of Speeds | Max. Cutting Dp. | Wt., lbs. | Included | No. Required | No. Included | Battery Charger Included | Blade Included | Blade Location | Features | Cannot Be Sold To | Each | |
Makita—40V DC | ||||||||||||||||
| GSC01Z | 7 1/4" | 5/8" | 3,500 | 1 | 2 5/8" | 10.5 | No | 1 | __ | No | No | Right Side | Brake, Chip Collector, LED Light, Safety Switch | Outside United States | 000000000 | 0000000 |
| GSC01M1 | 7 1/4" | 5/8" | 3,500 | 1 | 2 5/8" | 10.5 | Yes | 1 | 1 | Yes | No | Right Side | Brake, Chip Collector, LED Light, Safety Switch | Outside United States | 000000000 | 000000 |
Cordless Circular Saws for Wood
With all the power of an electric saw but no cords, these saws rip, cross-cut, and make angled cuts in wood sheets and boards anywhere you need. They’re best for long cuts and for wood that’s too wide for a miter or chop saw. Shortly after you release the trigger, a brake stops the blade so you can quickly reposition your workpiece for the next cut. Their brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.
Some saws include rechargeable batteries. For other saws, batteries and chargers are sold separately.
Makita saws maintain consistent cutting speed through dense wood areas such as knots and changes in grain. These saws sense the blade speed and increase speed and torque when met with the resistance of dense material. This keeps the saw from stalling out, so you can make smooth cuts with minimal strain on the motor.
Saws with a dust blower clear away sawdust to keep your cut line visible. Saws that cannot be sold outside the United States are restricted due to product regulations.
| Style | Manufacturer Model No. | Voltage | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | No. of Speeds | Max. Cutting Dp. | Max. Bevel Cut Angle | Wt., lbs. | Batteries Included | Battery Charger Included | Blade Included | Blade Location | Features | Cannot Be Sold To | Each | |
Makita | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | XSH03Z | 18V DC | 6 1/2" | 5/8" | 5,000 | 1 | 2 1/4" | 50° | 7.3 | No | No | Yes | Left Side | Brake, Cutting Resistance Detection, Dust Blower, LED Light | Outside United States | 0000000 | 0000000 |
Compact Cordless Cutoff Saws
At less than 3 lbs., these saws are light enough to use with one hand but powerful enough to cut through rebar. Using an abrasive wheel, they’re often used to cut pipes overhead or in tight spaces. Because they run on batteries, they're great for quick jobs when you don't have an air compressor or outlet. A brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.
Connect the dust hood to a dust collector to keep your workspace clean and remove debris from the air. If you're cutting on a flat surface, the dust hood helps stabilize the saw, making it easier to control the depth of your cut.
Some saws include rechargeable batteries. For other saws, batteries and chargers are sold separately.
Saws with reversible wheel rotation let you switch the wheel's direction to control where it sends sparks and debris.
Saws with a brake come to a stop when you release the trigger, so you can quickly reposition your tool and move on to your next cut.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your saw.
| For Wheel Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Wt., lbs. | Batteries Included | Battery Charger Included | Wheel Rotation | Includes | Features | Cannot Be Sold To | Each | |
Makita XCM01Z—18V DC | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3" | 3/8" | 20,000 | 5/8" | 2.6 | No | No | Reversible | One 3" Dia. × 3/64" Thick Aluminum Oxide Cutoff Wheel for Metal One 3" Dia. × 3/64" Thick Carbide Cutoff Wheel for Plastic and Composites One 3" Dia. × 3/64" Thick Diamond Cutoff Wheel for Ceramics Dust Hood | Brake, LED Light | Outside United States | 00000000 | 0000000 |
Electric Bench-Top Cutoff Saws
Use an abrasive wheel with these saws for general purpose cutting jobs. You can cut steel square structural tubing, aluminum conduit, and other hard materials.
Saws that cannot be sold outside the United States are restricted due to product regulations.
Max. Miter Cut Angle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Manufacturer Model No. | Current | For Wheel Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Left Swivel | Right Swivel | Wt., lbs. | Cord Lg., ft. | Includes | Cannot Be Sold To | Each | |
| Makita | LW1401 | 15 A @ 120 V AC | 14" | 1" | 3,800 | 5" | 45° | 45° | 37 | 3 | One 14" Dia. × 1/8" Thick Aluminum Oxide Cutoff Wheel for Metal | Outside United States | 0000000 | 0000000 |
Cordless Bench-Top Cutoff Saws
Make precise perpendicular cuts in metal and other hard materials from any bench top in your facility. Rechargeable batteries give you the same power as an electric cutoff saw, but without the hassle of needing access to an outlet. A brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance. Pair these saws with an abrasive wheel. They’re often used to cut steel square structural tubing and aluminum conduit.
Soon after you release the trigger, an electric brake stops the blade for quick repositioning to make repeated cuts. Equipped with a quick-release vise, these saws secure and release your workpiece quickly. The jaws of the vise operate without the need for multiple turns of the handle. Tool-free wheel changes let you switch out the cutoff wheel without using an L-key or wrench.
These saws require two 18V DC batteries. Batteries and chargers are not included.
Batteries | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Motor Type | For Wheel Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Max. Miter Cut Angle (Swivel Direction) | Wt., lbs. | Included | No. Required | Battery Charger Included | Features | Includes | Cannot Be Sold To | Each | |
Makita—36V DC | |||||||||||||||
| XWL01Z | Brushless | 14" | 1" | 3,800 | 5" | 45° (Left) | 36 | No | 2 | No | Brake, Quick-Release Vise, Tool-Free Wheel Change | One 14" Dia. × 3/32" Thick Aluminum Oxide Cutoff Wheel for Metal | Outside United States | 00000000 | 0000000 |
Electric Miter Saws
Often used to create door frames and aluminum supports, these saws make precise angled cuts for tight-fitting joints. The head swivels to make miter cuts across the face of your material.
Style A saws have a tilting head that makes beveled cuts through the thickness of your material. Use these saws on wood and soft metals such as aluminum and copper.
Saws that cannot be sold outside the United States are restricted due to product regulations.
 A |  Bevel Cut |
 Miter Cut |
Max. Cutting | Max. Miter Cut Angle | Max. Bevel Cut Angle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Manufacturer Model No. | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Left Swivel | Right Swivel | Left Tilt | Right Tilt | Wt., lbs. | Specifications Met | Blade Location | Includes | Cannot Be Sold To | Each | |
Makita | ||||||||||||||||||
| A | LS1040 | 15 A @ 120 V AC | 10" | 5/8" | 4,600 | 2 3/4" | 5 1/8" | 45° | 52° | 45° | 0° | 27.3 | UL Listed | Left Side | One 10" Dia. Carbide-Tooth Blade for Wood (40 Teeth) | Outside United States | 0000000 | 0000000 |
| For Manufacturer | For Manufacturer Model Number | Number of Brushes | Cannot Be Sold To | Each | |
| Makita | LS1040 | 2 | Outside United States | 00000000 | 00000 |
| For Manufacturer | For Manufacturer Model Number | Cannot Be Sold To | Each | |
| Makita | LS1040 | Outside United States | 0000000 | 000000 |
| For Manufacturer | For Manufacturer Model Number | Each | |
| Makita | LS1040 | 0000000 | 000000 |
Cordless Sliding-Arm Miter Saws
 | Bevel Cut |
Miter Cut |
Set up anywhere in your facility to make angled cuts in material that's too wide for a standard miter saw—the arm on these saws slides for added reach. These saws cut with the same power as an electric miter saw but without needing an outlet nearby. A brushless motor optimizes battery life, so these saws run longer on a single charge. The motor also enhances longevity because it runs cool and has few moving parts that require maintenance.
Use them to create joints that require a tight fit, such as door frames and aluminum supports. Swivel the head for angled cuts across the face of your material and tilt the head for beveled cuts through the thickness of your material. To help you position your material for an accurate cut, a light casts a line of shadow where the blade will meet the workpiece.
Makita saws have a higher voltage than other saws, which helps them maintain speed while cutting thick and hard materials. They also give you more cuts per charge. An electric brake stops the blade when you release the trigger to let you reposition your workpiece and move to your next cut.
Some saws include a rechargeable battery. For saws where the battery is not included, see Milwaukee batteries and chargers and Makita batteries and chargers.
Max. Cutting | Max. Miter Cut Angle | Max. Bevel Cut Angle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Left Swivel | Right Swivel | Left Tilt | Right Tilt | Wt., lbs. | Batteries Included | Battery Charger Included | Blade Included | Features | Cannot Be Sold To | Each | |
Makita—40V DC | |||||||||||||||||
| GSL03M1 | 10" | 5/8" | 3,600 | 2 3/16" | 12" | 60° | 60° | 48° | 48° | 60 | Yes | Yes | Yes | Brake, Cut-Line Guide | Outside United States | 00000000 | 000000000 |
| GSL03Z | 10" | 5/8" | 3,600 | 2 3/16" | 12" | 60° | 60° | 48° | 48° | 60 | No | No | Yes | Brake, Cut-Line Guide | Outside United States | 00000000 | 000000 |
| GSL04M1 | 12" | 1" | 4,400 | 3 5/8" | 15" | 60° | 60° | 48° | 48° | 70 | Yes | Yes | Yes | Brake, Cut-Line Guide | Outside United States | 00000000 | 00000000 |
| GSL04Z | 12" | 1" | 4,400 | 3 5/8" | 15" | 60° | 60° | 48° | 48° | 70 | No | No | Yes | Brake, Cut-Line Guide | Outside United States | 00000000 | 00000000 |