Biodegradable and nonflammable, these water-based degreasers cut through grease and oils without harsh chemicals.

These water-based degreasers use detergents to lift and rinse away grease and oils. They are nonflammable and give off less fumes than solvent-based degreasers.

Remove brake fluid, grease, and oil from brakes with these solvent-based cleaners.

These mild detergents contain bacteria that consume and break down grease and oil, rather than rinsing it into pipes that can clog.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls.

Use these cleaners to remove dirt, grime, and stains from most surfaces.

Stronger than our standard floor cleaners, these cleaners remove even the toughest soils and grease from floors to help prevent slips and falls.

Clean dust, dirt, and flux off work surfaces while also dissipating static.

Remove dirt, dust, and disinfectant residue from surfaces in clean rooms, including walls, floors, and stainless steel countertops. These cleaners are packaged in a clean room, sterilized, double bagged, and marked with a lot number.

Often used in freezers and cold-storage environments where other water-based cleaners would freeze, these cleaners remove dirt and grime in temperatures as low as -40° F.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax.

Spray these abrasion- and wear-resistant coatings on motor winding wire, transformers, and other metal electrical parts to protect them from oils, chemicals, and moisture.

Remove scale from water-cooled condensers, chillers, and non-potable water boilers.

Spray on to clean without rinsing.

Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.

Brush or spray on; then rinse off. These cleaners contain sodium hydroxide for tough jobs.

For strong bonds, clean and degrease surfaces before applying adhesives.

Twice as concentrated as our standard disinfectant/cleaners, these cleaners are often used in laboratories and medical environments where contamination is a concern.

Freshen spaces while disinfecting almost any surface.

Less harsh than our other disinfectants, these disinfectants won't irritate sensitive skin.

Bleach disinfects almost any surface as long as discoloration is not a concern.

Quickly dissolve and remove most adhesive residue.

Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.

These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.

These clinging gels eliminate mold stains and can be used on most surfaces, including grout, concrete, and brick.

Remove lime and hard-water stains with these nonfoaming cleaners. They can be used on most surfaces, including metal and plastic.

Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue.