McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    54 Products

    Portable 3D Printer Air Cleaners

    Image of Product. Front orientation. 3D Printer Air Cleaners. Portable 3D Printer Air Cleaners.
    Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts. Unlike standard air cleaners, which create airflow strong enough to cool the print area and warp your parts, these low-airflow cleaners won’t disrupt your print. A three-part filtering process keeps you from breathing harmful emissions: a prefilter traps large particles, then a combination HEPA and activated carbon filter captures both fine particles and fumes. These CE marked cleaners meet health, safety, and environmental protection standards for products.
    Attach the included hose and funnel to the cleaner to pull fumes directly from your printer. These compact, lightweight cleaners fit into most work areas, and are quiet enough for office use. The powder-coated steel housing holds up over a long service life.
    Overall
    Hose
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Current,
    amp
    Voltage,
    V AC
    For Inlet
    Duct Dia.
    Ht.
    Wd.
    Dp.
    Housing Material
    Lg.,
    ft.
    Material
    Cord Lg.,
    ft.
    Includes
    Each
    2644 dBA @ 3 ft.0.21202"13 1/4"11 1/4"11"Powder-Coated Steel6Plastic6Combination HEPA/Chemical Filter (Captures 99.99% of particles down to 0.03 microns), Disposable Prefilter4551N110000000
    Replacements for 3D Printer Air Cleaners

    Rotating Air Nozzles

    Image of Product. Adapter Fitting. Front orientation. Air Nozzles. Rotating Air Nozzles.
    Image of Product. Front orientation. Air Nozzles. Rotating Air Nozzles.

    Adapter

    Fitting

    As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.
    Air Inlet
    Overall
    Thread
    Size
    Thread
    Type
    Gender
    Connection
    Port
    Connection
    No. of Air
    Outlets
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Tip
    OD
    Lg.
    Wd.
    Max. Inlet
    Pressure, psi
    Material
    Specs. Met
    Each
    M27 × 2 mmMetric
    MaleHoseThreaded215 ft³/min @ 100 psi15583 dBA @ 80 psi5/16"4 15/16"6 5/16"145ZincOSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.954659N120000000
    Adapter Fittings

    T-Slot Cleaners

    Image of Product. Front orientation. T-Slot Cleaners. Steel.
    Image of Product. Front orientation. T-Slot Cleaners. Black-Oxide Steel.

    Steel

    Black-Oxide Steel

    Scrape debris out of machine table T-slots.
    For
    Slot Wd.
    Inch
    Metric, mm
    Overall
    Lg.
    Each
    Black-Oxide Steel
    1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8"16, 17, 18, 20, 22, 27, 336"95379A21400000
     
    Steel
    7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4"22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 327 1/4"95379A11000000
     

    Electrical Parts Cleaners for Fiber Optic Connectors

    Clean plugs or adapters on fiber-optic cords. These handheld cleaners remove dust, dirt, and grime with a lint-free fabric so cords can send data without disruptions caused by debris.
    For Plugs and Bulkhead Adapters—Plastic Handle
    Image of ProductInUse. Front orientation. Electrical Parts Cleaners. Electrical Parts Cleaners for Fiber Optic Connectors, For Bulkhead Adapters, For Plugs.
    Image of ProductInUse. Front orientation. Electrical Parts Cleaners. Electrical Parts Cleaners for Fiber Optic Connectors, For Bulkhead Adapters, For Plugs.
    Image of Product. Front orientation. Electrical Parts Cleaners. Electrical Parts Cleaners for Fiber Optic Connectors, For Bulkhead Adapters, For Plugs.
    Cleaners with a plastic handle have a cleaning tip for plugs and adapters. Flip open the cap to clean a plug, or remove the cap to clean a recessed adapter. Click the tool to push the cleaning fabric through the tip—each click pushes through a fresh cleaning surface. They also have an extendable nozzle, which lengthens them by an extra 1.5 in. to clean deep ports or crowded panels.
    For Fiber Optic
    Connection
    For Ferrule
    Size, mm
    Lg.
    Useful Life
    Cloth
    Material
    For
    Removing
    Each
    Straight Head with Extendable Nozzle
    FC, SC, ST2.59"800 CleaningsMicrofiberDirt, Dust5423N12000000
    LC, MU1.259"800 CleaningsMicrofiberDirt, Dust5423N1100000
     

    3D Printer Cleaning Filaments

    Image of Product. Front orientation. 3D Printer Cleaning Filaments.
    Clear your 3D printer’s extruder with these cleaning filaments. The compound in the filaments bonds to leftover material, flushing it out as the compound passes through. Run a filament through your extruder before switching to a new printing job to remove old materials or colors that could bleed over or jam the printer. Even if you’re not changing jobs, use these filaments to periodically purge residue from your system to keep it printing smoothly. At 8" long, each filament is sized for a single use, so there’s no need to cut them to size.
    Dia.,
    mm
    Lg.
    Wt.,
    g
    Operating Temperature
    Range
    Pkg.
    Qty.
    Pkg.
    Polyethylene
     
    White
    1.758"25177° C to 230° C
    350° F to 446° F
    503517N11000000
    2.858"25177° C to 230° C
    350° F to 446° F
    353517N1200000
     

    Bulk Hand Sanitizer Dispensers

    Distribute hand sanitizer with these refillable dispensers. Instead of using a button, they dispense a drop of sanitizer when the battery-powered sensor detects motion, limiting the spread of germs between users.
    Screw Wall Mount
    Image of Product. Front orientation. Hand Sanitizer Dispensers. Bulk Hand Sanitizer Dispensers, Wall Mount.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Signal Light.

    Signal Light

    Wall-mount dispensers have a manual dispensing button for when their batteries run out. A signal light flashes when batteries are running low, letting you know it’s time to replace them. The amount of sanitizer they dispense is adjustable during initial setup and maintenance. These dispensers comply with ADA regulations when properly installed.
    Batteries
    For Sanitizer
    Form
    Capacity
    Ht.
    Wd.
    Dp.
    Material
    Color
    Included
    Size
    No.
    Required
    No. of Mounting
    Slots
    For Mounting
    Screw Size
    Mounting Hardware
    Included
    Features
    Each
    Push-Activated and Touch-Free Dispenser
    Foam30 fl. oz./900 ml12"5 1/2"4"PlasticBlackNoC410No. 8, No. 10
    NoKey-Locking Cover, Low Battery Indicator, Signal Light4503N11000000
    Gel30 fl. oz./900 ml12"5 1/2"4"PlasticBlackNoC410No. 8, No. 10
    NoKey-Locking Cover, Low Battery Indicator, Signal Light4503N1400000
     
    Hand Sanitizer Dispenser Stands
    Freestanding
    Image of Product. Front orientation. Hand Sanitizer Dispensers. Bulk Hand Sanitizer Dispensers, Freestanding.
    Place freestanding dispensers on any flat surface, no mounting or installation required. Put your hands close to the sensor for a small amount of sanitizer, or farther away for a larger amount. These dispensers have a rechargeable battery and come with a charger. Made of corrosion-resistant stainless steel, they’re more durable than plastic dispensers and won’t rust in wet environments. They’re rated IP67 as protected from dust—even in areas with continuous airflow—as well as high-pressure jets of water from washdowns and submersion in up to a meter of water for 30 minutes.
    For Sanitizer
    Form
    Capacity
    Ht.
    Wd.
    Dp.
    Material
    Batteries
    Included
    Battery Charger
    Included
    Enclosure
    Rating
    Each
    Touch-Free Dispenser
    Liquid9 fl. oz./250 ml6 3/4"2 3/4"4 1/2"Stainless Steel
    YesYesIP67
    4503N19000000
     

    T-Slot Covers

    Image of ProductInUse. Front orientation. T-Slot Covers.
    Prevent chips, debris, and small parts from falling into T-slots. These covers snap securely into T-slots but can be easily removed to change your table setup. They can be cut to length.
    For
    Slot Wd.
    Inch
    Metric,
    mm
    Lg.
    Each
    Aluminum
    1/2"1239"1353N11000000
    9/16"1439"1353N1200000
    5/8", 11/16"1639"1353N1300000
    1839"1353N1400000
    2239"1353N1500000
    2839"1353N1600000
     

    Folded Clean Room Wipe Dispensers

    Image of ProductInUse. Front orientation. Wipe Dispensers. Folded Clean Room Wipe Dispensers.
    Dispense folded clean room wipes one at a time to reduce cross contamination and waste. These dispensers are cleaned and double bagged in a clean room to ensure that they’re sterile. Place them on any flat surface with the weighted base, or mount them on the wall to save counter space. They’re front loading, so you don’t need to feed wipes down the chute, which can lead to tangling. Dispensing angle is adjustable and locks in place—tilt it so that wipes are accessible. A weighted tamper presses down on the stack of wipes, so it’s easy to grab one even when they’re running low. A clear window shows you how many wipes are left. Wipes not included.
    Stainless Steel
    For
    Folded
    Mouning
    Ht.
    Wd.
    Dp.
    Lg.
    Wd.
    For Max. No.
    of Wipes
    Fasteners
    Included
    No. of
    Holes
    Clean Room
    Std.
    Each
    14 1/2"9 3/4"5 3/4"9"4 1/2"500No4ISO Class 5
    4445N1120000000
     

    Tube Brushes

    Image of Product. Twisted Shank, 0.003 Bristle Dia. and Smaller". Front orientation. Twisted Shank. Tube Brushes, 3" Overall Length.
    Image of Product. Twisted Shank, 0.004 Bristle Dia. and Larger". Front orientation. Twisted Shank. Tube Brushes, 3" Overall Length.

    Twisted Shank, 0.003

    Bristle Dia. and Smaller"

    Twisted Shank, 0.004

    Bristle Dia. and

    Larger"

    Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
    Stainless Steel Bristles—Brushes with stainless steel bristles won’t leave behind debris that could cause rust on your workpiece.
    Brush
    Bristle
    Stem
    Each
    Shank
    Dia.
    Dia.,
    mm
    Lg.
    Dia.
    Flexibility
    No. of
    Spirals
    No. of
    Wires
    Wire Material
    Overall
    Lg.
    1-11
    12-Up
    Twisted Shank
     
    Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic
    0.016"15/8"0.002"Flexible
    12Stainless Steel3"4905A510000000000
    0.026"1.55/8"0.002"Flexible
    12Stainless Steel3"4905A5200000000
    0.034"23/4"0.003"Flexible
    12Stainless Steel3"4905A5300000000
    0.043"2.53/4"0.003"Flexible
    12Stainless Steel3"4905A5400000000
    0.055"31"0.003"Flexible
    12Stainless Steel3"4905A5500000000
    0.055"3.51"0.003"Flexible
    12Stainless Steel3"4905A5600000000
    0.072"41"0.003"Flexible
    12Stainless Steel3"4905A5700000000
    0.083"4.51"0.003"Flexible
    12Stainless Steel3"4905A5800000000
    0.083"51"0.003"Flexible
    12Stainless Steel3"4905A5900000000
    0.11"5.51"0.003"Flexible
    12Stainless Steel3"4905A6100000000
    0.11"61"0.003"Flexible
    12Stainless Steel3"4905A6200000000
    0.11"6.51"0.003"Flexible
    12Stainless Steel3"4905A6300000000
     

    Air Nozzles

    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Air Nozzles, Style C.

    Style C

    These nozzles are engineered for the most efficient air consumption.
    Style C
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Air Nozzles, Style C.
    OSHA Compliant 29 CFR 1910.242—Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure.
    OSHA Compliant 29 CFR 1910.95—Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Tip
    OD
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    M4 × 0.5 mm Metric Male Inlet
     
    316 Stainless Steel
    3 ft³/min @ 100 psi1,00058 dBA @ 80 psi3/16"1/2"250OSHA Compliant 29 CFR 1910.24231875K505000000
     
    M5 × 0.5 mm Metric Male Inlet
     
    316 Stainless Steel
    5 ft³/min @ 100 psi1,00068 dBA @ 80 psi7/32"5/8"250OSHA Compliant 29 CFR 1910.24231875K50700000
     
    M6 × 0.75 mm Metric Male Inlet
     
    316 Stainless Steel
    10 ft³/min @ 100 psi1,00075 dBA @ 80 psi1/4"3/4"250OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.9531875K2700000
     

    Low-Profile Wide-Airflow Air Nozzles

    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Low-Profile Wide-Airflow Air Nozzles, Style B.

    Style B

    At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.
    Style B
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Low-Profile Wide-Airflow Air Nozzles, Style B.
    OSHA Compliant 29 CFR 1910.242—Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure.
    OSHA Compliant 29 CFR 1910.95—Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.
    Tip
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Wd.
    Thk.
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    1/8 BSPT Female
     
    Zinc
    18 ft³/min @ 80 psi25082 dBA @ 80 psi1"3/8"1 5/16"250OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.957343N49000000
     

    Wide-Airflow Air Nozzles

    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style A.
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style B.
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style E.

    Style A

    Style B

    Style E

    The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.
    Style A
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style A.
    OSHA Compliant 29 CFR 1910.242—Nozzles that are OSHA Compliant 29 CFR 1910.242 conform to requirements for maximum air outlet pressure.
    Volume @ Pressure—Volume (dBA) is measured 3 ft. from the nozzle at 80 psi.
    Tip
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Wd.
    Thk.
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    1/8 BSPP Male Inlet
     
    Zinc
    12 ft³/min @ 85 psi15582 dBA @ 80 psi15/16"3/16"2 3/16"145OSHA Compliant 29 CFR 1910.2427343N22000000
     
    1/4 BSPP Male Inlet
     
    Zinc
    22 ft³/min @ 85 psi15585 dBA @ 80 psi1 13/16"3/16"3 1/8"145OSHA Compliant 29 CFR 1910.2427343N23000000
     
    Style B
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style B.
    OSHA Compliant 29 CFR 1910.242—Nozzles that are OSHA Compliant 29 CFR 1910.242 conform to requirements for maximum air outlet pressure.
    Volume @ Pressure—Volume (dBA) is measured 3 ft. from the nozzle at 80 psi.
    Tip
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Wd.
    Thk.
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    1/4 BSPP Male Inlet
     
    Nylon
    52 ft³/min @ 85 psi35590 dBA @ 80 psi2 3/4"1/4"2 9/16"145OSHA Compliant 29 CFR 1910.2427343N290000000
     
    1/2 BSPP Male Inlet
     
    Nylon
    156 ft³/min @ 85 psi35596 dBA @ 80 psi5 9/16"1/4"3 13/16"145OSHA Compliant 29 CFR 1910.2427343N31000000
     
    Style E
    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Wide-Airflow Air Nozzles, Style E.
    OSHA Compliant 29 CFR 1910.242—Nozzles that are OSHA Compliant 29 CFR 1910.242 conform to requirements for maximum air outlet pressure.
    OSHA Compliant 29 CFR 1910.95—Nozzles that are OSHA Compliant 29 CFR 1910.95 conform to requirements for noise.
    Volume @ Pressure—Volume (dBA) is measured 3 ft. from the nozzle at 80 psi.
    Tip
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Wd.
    Thk.
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    1/4 BSPT Female Inlet
     
    Zinc
    37 ft³/min @ 80 psi25083 dBA @ 80 psi2"7/16"2 1/16"250OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.957343N470000000
     
    316 Stainless Steel
    37 ft³/min @ 80 psi1,00083 dBA @ 80 psi2"7/16"2 1/16"250OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.957343N48000000
     

    Right-Angle Wide-Airflow Air Nozzles

    Image of Product. Front orientation. Contains Annotated. Air Nozzles. Right-Angle Wide-Airflow Air Nozzles, Zinc.

    Zinc

    Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.
    OSHA Compliant 29 CFR 1910.242—All conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.
    Tip
    Air Consumption
    @ Pressure
    Max. Temp.,
    ° F
    Volume @
    Pressure
    Wd.
    Thk.
    Overall
    Lg.
    Max. Inlet
    Pressure, psi
    Specs. Met
    Each
    1/8 BSPP Male
     
    Zinc
    13 ft³/min @ 85 psi15584 dBA @ 80 psi15/16"3/16"15/16"145OSHA Compliant 29 CFR 1910.2427343N32000000
     

    SMC Modular Compressed Air Filter/Regulator/Lubricator (FRL) Joiner Clamps

    Image of Product. Front orientation. Filter/Regulator/Lubricator Joiner Clamps. SMC Modular Compressed Air Filter/Regulator/Lubricator (FRL) Joiner Clamps, Joiner Clamps.

    Joiner Clamps

    Connect SMC modular filter/regulator/lubricator components with the same series number. These joiner clamps create compact, airtight connections between components—even if the inlet size or thread types are slightly different.
    For Mfr. Series
    For Inlet Thread
    Size
    Lg.
    Dp.
    Ht.
    Each
    Joiner Clamps
    AF10-A, AFD10-A, AL10-A, AR10-A, AW10-A, VHS10M5 × 0.8 mm1/4"1 3/8"3/4"9384N5800000
     

    Vacuum Cleaner Hose

    Image of Product. Front orientation. Vacuum Cleaner Hose. For Nikro.

    For Nikro

    Dia.
    Lg.,
    ft.
    Material
    For
    Mfr.
    Mfr. Equiv.
    No.
    Each
    1 1/2"10PlasticNikro52033214125T423000000
     

    Surface-Mount Ultraviolet Disinfecting Lights

    Image of Product. Front orientation. Disinfecting Lights. Surface-Mount Ultraviolet Disinfecting Lights, Powder-Coated Aluminum Housing.

    Powder-Coated Aluminum

    Housing

    Kill viruses, bacteria, and other germs without chemical cleaners. These lights mount under a hood or above a workstation and use UV light to disinfect hard, smooth surfaces. Ideal for food processing areas that require frequent cleaning, they use the same trusted technology hospitals rely on between patients. These lights are made in an EPA-registered facility to meet pesticide device requirements. For safety, always wear UV-protective gear while the light is on.
    Powder-Coated Aluminum Housing—A hood-shaped housing and reflective inner surface directs light towards the target surface.
    Light Intensity @ Distance—Measures the power of ultraviolet radiation from these lights. The effectiveness of UV-C disinfection depends on light intensity and exposure time—higher intensity shortens disinfection time. To increase intensity, move the light closer to the object.
    Rated Life—Replace bulbs after the listed time to maintain germicidal performance.
    Cannot Be Sold To—These lights cannot be sold to Canada due to import regulations.
    Disinfecting Lights
    Replacement
    Light Bulbs
    Bulbs
    Overall
    Mounting
    Holes
    Electrical
    Connection
    Light Intensity @ Distance
    Contact Time to Disinfect @ 6"
    Wavelength,
    nm
    Max. Wattage
    per Bulb, W
    No.
    Req.
    Included
    Lg.
    Rated Life,
    hr.
    Lg.
    Wd.
    Ht.
    No.
    of
    Dia.
    Hardware
    Included
    Electrical
    Connection Type
    Cord Lg.,
    ft.
    Voltage,
    V AC
    Cannot Be
    Sold To
    Each
    Each
    White Powder-Coated Aluminum Housing
    5.97 mW/cm² @ 6", 0.42 mW/cm² @ 36"Flu: 7 sec.
    COVID-19: 5 sec.
    Staphylococcus Aureus (Staph): 7 sec.
    Escherichia Coli (E. Coli): 7 sec.
    Aspergillus Niger (Mold): 227 sec.
    Saccharomyces Spp. (Yeast): 24 sec.
    254202Yes23 1/8"1,00024"6"4 1/4"41/4"NoPlug In8120Canada3604N1200000009188K17000000
    7.29 mW/cm² @ 6", 0.98 mW/cm² @ 36"Flu: 5 sec.
    COVID-19: 4 sec.
    Staphylococcus Aureus (Staph): 5 sec.
    Escherichia Coli (E. Coli): 5 sec.
    Aspergillus Niger (Mold): 186 sec.
    Saccharomyces Spp. (Yeast): 20 sec.
    254402Yes47 1/8"1,00049 5/8"6"4 1/4"41/4"NoPlug In8120Canada3604N13000000009188K1800000
     
    back to top