Hole-Grip Clamps
Insert these clamps into drilled holes in sheet material to grip and align while riveting or welding. They require clamp installation pliers (sold separately) for positioning and removal.
| OD | For Drill Bit Size | For Material Thickness | Overall Lg. | Body Material | Each | |
| 3/32" | No. 40 | 0"-1/4" | 2" | Steel | 0000000 | 00000 |
| 3/32" | No. 40 | 0"-1/2" | 2" | Steel | 0000000 | 0000 |
| 1/8" | No. 30 | 0"-1/4" | 2" | Steel | 0000000 | 0000 |
| 1/8" | No. 30 | 0"-1/2" | 2" | Steel | 0000000 | 0000 |
| 5/32" | No. 20 | 0"-1/4" | 2" | Steel | 0000000 | 0000 |
| 5/32" | No. 20 | 0"-1/2" | 2" | Steel | 0000000 | 0000 |
| 3/16" | No. 10 | 0"-1/4" | 2" | Steel | 0000000 | 0000 |
| 3/16" | No. 10 | 0"-1/2" | 2" | Steel | 0000000 | 0000 |
| 7/32" | 7/32" | 0"-1/4" | 2 1/16" | Steel | 0000000 | 0000 |
| 7/32" | 7/32" | 0"-1/2" | 2 7/16" | Steel | 0000000 | 0000 |
| 1/4" | 1/4" | 0"-1/4" | 2" | Steel | 0000000 | 0000 |
| 1/4" | 1/4" | 0"-1/2" | 2 7/16" | Steel | 0000000 | 0000 |
Hole-Grip Clamp Sets
Sets include clamps and installation pliers. Insert clamps into drilled holes in sheet material to grip and align while riveting or soldering.
| Number of Pieces | Includes | Container Type | Each | |
| 7 | One 2 1/4" Lg. 3/32" OD Steel Hole-Grip Clamp with 1/4" Max. Opening (For No. 40 drill bit size) One 2 1/4" Lg. 1/8" OD Steel Hole-Grip Clamp with 1/4" Max. Opening (For No. 30 drill bit size) One 2 1/4" Lg. 3/16" OD Steel Hole-Grip Clamp with 1/4" Max. Opening (For No. 10 drill bit size) One 2 1/4" Lg. 1/4" OD Steel Hole-Grip Clamp with 1/4" Max. Opening (For 1/4" drill bit size) Two 2 1/8" Lg. Pliers-Activated Spring Clamps with 1/2" Max. Jaw Opening and Aluminum Jaws 7 1/4" Lg. Steel Clamp Installation Pliers | Plastic Case | 0000000 | 000000 |
| 51 | Ten 2 1/4" Lg. 3/32" OD Steel Hole-Grip Clamps with 1/4" Max. Opening (For No. 40 drill bit size) Ten 2 1/4" Lg. 1/8" OD Steel Hole-Grip Clamps with 1/4" Max. Opening (For No. 30 drill bit size) Ten 2 1/4" Lg. 5/32" OD Steel Hole-Grip Clamps with 1/4" Max. Opening (For No. 20 drill bit size) Ten 2 1/4" Lg. 3/16" OD Steel Hole-Grip Clamps with 1/4" Max. Opening (For No. 10 drill bit size) Ten 2 1/4" Lg. 1/4" OD Steel Hole-Grip Clamps with 1/4" Max. Opening (For 1/4" drill bit size) 7 1/4" Lg. Steel Clamp Installation Pliers | Plastic Case | 0000000 | 000000 |
Pliers-Activated Spring Clamps
Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.
For technical drawings and 3-D models, click on a part number.
Pliers-Activated Spring Clamp Sets
Set includes 12 clamps and the installation pliers required for positioning and removal. Clamps open with pliers and spring closed when the pliers are released.
Jaw | |||||||
|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Reach | Wd. | Material | Container Type | Each | |
Steel Body | |||||||
| 13 | Six 2 1/8" Lg. Clamps with 1/2" Max. Opening Six 2 1/2" Lg. Clamps with 3/4" Max. Opening 7 1/4" Lg. Clamp Installation Pliers | 1" | 1/4" | Aluminum | Plastic Case | 0000000 | 0000000 |
Hole-Mount Push/Pull Toggle Clamps
Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 450 | 2 1/4" | 1 1/2" | 1/2" | 5/16"-18 | 1" | 4 1/4" | 5 5/8" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | 3/8"-16 | 1 1/4" | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 400 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Hole-Mount Push/Pull Toggle Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Panel mount these clamps through a hole with the included nut, or drill and tap a hole to flush mount. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Pull-only clamps secure when the plunger is fully retracted.
For technical drawings and 3-D models, click on a part number.
Hole-Mount Adjustable-Travel Push/Pull Clamps
Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 600 | 7 7/8" | 7/8" | 7 7/8" | 1/2" | M6 | 12 mm | 5 1/8" | 13" | Steel | 0000000 | 0000000 |
Revolving Screw Clamps
When loosened, you can spin the body of this clamp around its mounting point for better access to the workpiece. Position over your workpiece and turn the handle to clamp down. Mount the clamp in a threaded hole or on a mounting base (sold separately).
For technical drawings and 3-D models, click on a part number.
Hole-Mount Screw Clamps
Also known as press screws, mount these clamps through a drilled hole and turn the crank to move the jaw end of the screw in and out.
For technical drawings and 3-D models, click on a part number.
Jaw | Handle | Overall | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Screw Lg. | For Hole Size | Lg. | Wd. | Screw Material | Style | Material | Lg. | Wd. | Number of | Dia. | Mounting Fasteners Included | Each | |
| 9" | 1" | 1 3/8" | 1 3/8" | Steel | Crank | 18-8 Stainless Steel | 12" | 6" | 4 | 1/8" | No | 0000000 | 000000 |
| 12" | 1" | 1 3/8" | 1 3/8" | Steel | Crank | 18-8 Stainless Steel | 14 1/2" | 6" | 4 | 1/8" | No | 0000000 | 00000 |
| 18" | 1" | 1 3/8" | 1 3/8" | Steel | Crank | 18-8 Stainless Steel | 20 1/2" | 6" | 4 | 1/8" | No | 0000000 | 00000 |
Screw Clamps
The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces. Install by removing the tip, threading the screw through the mounting base’s hole, and reattaching the tip on the other side.
Optional extra-large steel tips offer more gripping strength. Optional nonmarring plastic tips minimize damage to workpieces.
Clamps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tip | Handle | Optional Extra-Large Steel Tips | Optional Nonmarring Plastic Tips | Replacement Retaining Springs | |||||||||||
| Thread Size | Lg. | Dia. | Lg. | Ht. | Wd. | Max. Swivel Angle | Material | Each | Each | Each | Each | ||||
| 1/4"-20 | 1 1/4" | 3/8" | 1/4" | 5/8" | 1 1/8" | 10° | Steel | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1/4"-20 | 2 3/4" | 3/8" | 1/4" | 5/8" | 1 1/8" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 1/4"-20 | 3 1/2" | 3/8" | 1/4" | 5/8" | 1 1/8" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 3/8"-16 | 1 5/16" | 1/2" | 1/4" | 1" | 2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 3/8"-16 | 2 13/16" | 1/2" | 1/4" | 1" | 2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 3/8"-16 | 4 5/16" | 1/2" | 1/4" | 1" | 2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 1/2"-13 | 2 1/16" | 5/8" | 3/8" | 1 1/8" | 2 1/2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 1/2"-13 | 3 9/16" | 5/8" | 3/8" | 1 1/8" | 2 1/2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 1/2"-13 | 5 1/16" | 5/8" | 3/8" | 1 1/8" | 2 1/2" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 5/8"-11 | 2 5/16" | 3/4" | 1/2" | 1 1/4" | 3" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 5/8"-11 | 3 13/16" | 3/4" | 1/2" | 1 1/4" | 3" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
| 5/8"-11 | 5 5/16" | 3/4" | 1/2" | 1 1/4" | 3" | 10° | Steel | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 000 |
Expanding Cam Handles for Unthreaded Holes
Use these handles to keep holes aligned or lift several sheets of thin material. They have a plug that expands to grip the edges inside holes. They are not suitable for permanent installation—use only for temporary mounting. Made of plastic, all of these handles resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Handle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Hole Dia., mm | For Max. Material Thick. | Lg. | Wd. | Center Ht., mm | Clamped Ht., mm | Max. Clamping Force, lbs. | Plug Material | Washer Material | Each | |
Unthreaded Plug | ||||||||||
Black Plastic | ||||||||||
| 12 | 5/32" | 72 mm | 16 mm | 14 | 22 | 11 | Rubber | Plastic | 0000000 | 000000 |
| 14 | 5/32" | 72 mm | 16 mm | 14 | 22 | 13 | Rubber | Plastic | 0000000 | 00000 |
| 16 | 1/4" | 100 mm | 24 mm | 16 | 29 | 13 | Rubber | Plastic | 0000000 | 00000 |
| 18 | 1/4" | 100 mm | 24 mm | 16 | 29 | 22 | Rubber | Plastic | 0000000 | 00000 |
| 20 | 1/4" | 100 mm | 24 mm | 16 | 29 | 22 | Rubber | Plastic | 0000000 | 00000 |