Length Length |
|---|
|
|
|
Material Material |
|---|
|
PEM® Part Number PEM® Part Number |
|---|
Thread Length Thread Length |
|---|
|
For Hole Diameter For Hole Diameter |
|---|
|
|
|
Base Diameter Base Diameter |
|---|
|
|
|
Drill Bit Size Drill Bit Size |
|---|
|
|
|
For Minimum Length Between Hole Center and Sheet Edge For Minimum Length BetweenHole Center and Sheet Edge |
|---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Threaded Studs and Rods
More
Steel Press-Fit Studs
These steel studs are zinc plated to resist corrosion in wet environments. Press them into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | PEM® Part Number | Thread Lg. | Drill Bit Size | For Min. Material Thick. | For Min. Lg. Between Hole Center and Sheet Edge | For Hole Dia. | Hole Size Tolerance | Base Dia. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2-56 | |||||||||||||
| 1/4" | FH-256-4 | 11/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 5/16" | FH-256-5 | 15/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FH-256-6 | 19/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1/2" | FH-256-8 | 31/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 5/8" | FH-256-10 | 35/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-256-12 | 43/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
4-40 | |||||||||||||
| 1/4" | FH-440-4 | 5/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/16" | FH-440-5 | 15/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/8" | FH-440-6 | 9/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 1/2" | FH-440-8 | 13/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/8" | FH-440-10 | 17/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/4" | FH-440-12 | 43/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-440-14 | 51/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FH-440-16 | 59/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FH-440-20 | 1 11/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
6-32 | |||||||||||||
| 1/4" | FH-632-4 | 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/16" | FH-632-5 | 7/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 3/8" | FH-632-6 | 9/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 1/2" | FH-632-8 | 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/8" | FH-632-10 | 17/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/4" | FH-632-12 | 21/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 7/8" | FH-632-14 | 25/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-632-16 | 29/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1 1/4" | FH-632-20 | 1 5/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-632-24 | 1 13/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
8-32 | |||||||||||||
| 1/4" | FH-832-4 | 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 5/16" | FH-832-5 | 7/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/8" | FH-832-6 | 9/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1/2" | FH-832-8 | 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-832-10 | 17/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-832-12 | 21/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-832-14 | 25/32" | No. 20 | 0.040" | 9/32" | 0.161" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-832-16 | 29/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-832-20 | 1 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-832-24 | 1 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
10-24 | |||||||||||||
| 5/16" | FH-024-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FH-024-6 | 17/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FH-024-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-024-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-024-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-024-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-024-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-024-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1 1/2" | FH-024-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
10-32 | |||||||||||||
| 5/16" | FH-032-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FH-032-6 | 17/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FH-032-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-032-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-032-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-032-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-032-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-032-20 | 1 9/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-032-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
1/4"-20 | |||||||||||||
| 3/8" | FH-0420-6 | 15/64" | 1/4" | 0.062" | 5/16" | 1/4" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | FH-0420-8 | 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-0420-10 | 31/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FH-0420-12 | 39/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FH-0420-14 | 47/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FH-0420-16 | 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/8" | FH-0420-18 | 63/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FH-0420-20 | 1 7/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FH-0420-24 | 1 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 2" | FH-0420-32 | 1 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
5/16"-18 | |||||||||||||
| 1/2" | FH-0518-8 | 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | FH-0518-10 | 15/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FH-0518-12 | 19/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FH-0518-14 | 23/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1" | FH-0518-16 | 27/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FH-0518-20 | 1 5/64" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FH-0518-24 | 1 21/64" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| Lg., mm | Thread Pitch, mm | PEM® Part Number | Thread Lg., mm | Drill Bit Size | For Min. Material Thick., mm | For Min. Lg. Between Hole Center and Sheet Edge, mm | For Hole Dia., mm | Hole Size Tolerance, mm | Base Dia., mm | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Metric Zinc-Plated Steel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M2.5 | ||||||||||||||
| 6 | 0.45 | FH-M2.5-6 | 4 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 10 | 0.45 | FH-M2.5-10 | 8 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.45 | FH-M2.5-15 | 13 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.45 | FH-M2.5-18 | 16 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3 | ||||||||||||||
| 6 | 0.5 | FH-M3-6 | 4 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 8 | 0.5 | FH-M3-8 | 6 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.5 | FH-M3-10 | 8 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.5 | FH-M3-12 | 10 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.5 | FH-M3-15 | 13 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.5 | FH-M3-18 | 16 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.5 | FH-M3-20 | 18 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 25 | 0.5 | FH-M3-25 | 23 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3.5 | ||||||||||||||
| 8 | 0.6 | FH-M3.5-8 | 6 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.6 | FH-M3.5-10 | 8 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.6 | FH-M3.5-12 | 10 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M4 | ||||||||||||||
| 6 | 0.7 | FH-M4-6 | 4 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 8 | 0.7 | FH-M4-8 | 6 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.7 | FH-M4-10 | 8 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.7 | FH-M4-12 | 10 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.7 | FH-M4-15 | 13 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.7 | FH-M4-18 | 16 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.7 | FH-M4-20 | 18 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 25 | 0.7 | FH-M4-25 | 23 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 30 | 0.7 | FH-M4-30 | 28 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.7 | FH-M4-35 | 33 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M5 | ||||||||||||||
| 8 | 0.8 | FH-M5-8 | 5 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.8 | FH-M5-10 | 7 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.8 | FH-M5-12 | 9 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.8 | FH-M5-15 | 12 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.8 | FH-M5-18 | 15 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.8 | FH-M5-20 | 17 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 25 | 0.8 | FH-M5-25 | 22 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 30 | 0.8 | FH-M5-30 | 27 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.8 | FH-M5-35 | 32 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M6 | ||||||||||||||
| 10 | 1 | FH-M6-10 | 7 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 1 | FH-M6-12 | 9 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 15 | 1 | FH-M6-15 | 12 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 1 | FH-M6-18 | 15 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 1 | FH-M6-20 | 17 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 1 | FH-M6-25 | 22 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 30 | 1 | FH-M6-30 | 27 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 1 | FH-M6-35 | 32 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
M8 | ||||||||||||||
| 12 | 1.25 | FH-M8-12 | 8 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 15 | 1.25 | FH-M8-15 | 11 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 1.25 | FH-M8-20 | 16 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 1.25 | FH-M8-25 | 21 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 30 | 1.25 | FH-M8-30 | 26 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 35 | 1.25 | FH-M8-35 | 31 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
Stainless Steel Press-Fit Studs
18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Press them into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | PEM® Part Number | Thread Lg. | Drill Bit Size | For Min. Material Thick. | For Min. Lg. Between Hole Center and Sheet Edge | For Hole Dia. | Hole Size Tolerance | Base Dia. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4-40 | |||||||||||||
| 1/4" | FHS-440-4 | 5/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 5/16" | FHS-440-5 | 7/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-440-6 | 9/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FHS-440-8 | 13/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FHS-440-10 | 35/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-440-12 | 21/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-440-14 | 51/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | FHS-440-16 | 29/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
6-32 | |||||||||||||
| 1/4" | FHS-632-4 | 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-632-5 | 7/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-632-6 | 9/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-632-8 | 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-632-10 | 17/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-632-12 | 21/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-632-14 | 25/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-632-16 | 29/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1 1/4" | FHS-632-20 | 1 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FHS-632-24 | 1 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
8-32 | |||||||||||||
| 1/4" | FHS-832-4 | 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-832-5 | 7/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-832-6 | 9/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-832-8 | 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-832-10 | 17/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-832-12 | 21/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-832-14 | 25/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-832-16 | 29/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-832-20 | 1 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FHS-832-24 | 1 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
10-24 | |||||||||||||
| 3/8" | FHS-024-6 | 9/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-024-8 | 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 5/8" | FHS-024-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FHS-024-12 | 21/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FHS-024-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-024-16 | 29/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-024-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FHS-024-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
10-32 | |||||||||||||
| 5/16" | FHS-032-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FHS-032-6 | 9/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-032-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-032-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-032-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FHS-032-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-032-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-032-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FHS-032-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
1/4"-20 | |||||||||||||
| 3/8" | FHS-0420-6 | 15/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1/2" | FHS-0420-8 | 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | FHS-0420-10 | 31/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FHS-0420-12 | 39/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 7/8" | FHS-0420-14 | 47/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1" | FHS-0420-16 | 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FHS-0420-20 | 1 7/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/2" | FHS-0420-24 | 1 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
5/16"-18 | |||||||||||||
| 1/2" | FHS-0518 -8 | 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | FHS-0518-10 | 15/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | FHS-0518-12 | 19/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 7/8" | FHS-0518-14 | 23/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | FHS-0518-16 | 27/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/4" | FHS-0518-20 | 1 3/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
| 1 1/2" | FHS-0518-24 | 1 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
2-56 | |||||||||||||
| 1/4" | FHS-256-4 | 5/32" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-256-5 | 7/32" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-256-6 | 5/16" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FHS-256-8 | 27/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-256-10 | 35/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-256-12 | 43/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| Lg., mm | Thread Pitch, mm | PEM® Part Number | Thread Lg., mm | Drill Bit Size, mm | For Min. Material Thick., mm | For Min. Lg. Between Hole Center and Sheet Edge, mm | For Hole Dia., mm | Hole Size Tolerance, mm | Base Dia., mm | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Metric 18-8 Stainless Steel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M2.5 | ||||||||||||||
| 6 | 0.45 | FHS-M2.5-6 | 4 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 000000 |
| 8 | 0.45 | FHS-M2.5-8 | 6 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.45 | FHS-M2.5-10 | 8 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.45 | FHS-M2.5-12 | 10 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.45 | FHS-M2.5-15 | 13 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3 | ||||||||||||||
| 6 | 0.5 | FHS-M3-6 | 4 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 8 | 0.5 | FHS-M3-8 | 6 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.5 | FHS-M3-10 | 8 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.5 | FHS-M3-12 | 10 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 15 | 0.5 | FHS-M3-15 | 13 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 18 | 0.5 | FHS-M3-18 | 16 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.5 | FHS-M3-20 | 18 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 0.5 | FHS-M3-25 | 23 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
M4 | ||||||||||||||
| 6 | 0.7 | FHS-M4-6 | 4 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 8 | 0.7 | FHS-M4-8 | 6 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.7 | FHS-M4-10 | 8 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.7 | FHS-M4-12 | 10 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.7 | FHS-M4-15 | 13 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 0.7 | FHS-M4-18 | 16 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.7 | FHS-M4-20 | 18 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 0.7 | FHS-M4-25 | 23 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.7 | FHS-M4-35 | 33 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M5 | ||||||||||||||
| 8 | 0.8 | FHS-M5-8 | 5 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 10 | 0.8 | FHS-M5-10 | 7 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.8 | FHS-M5-12 | 9 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.8 | FHS-M5-15 | 12 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 0.8 | FHS-M5-18 | 15 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.8 | FHS-M5-20 | 17 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 0.8 | FHS-M5-25 | 22 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 30 | 0.8 | FHS-M5-30 | 27 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 35 | 0.8 | FHS-M5-35 | 32 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M6 | ||||||||||||||
| 10 | 1 | FHS-M6-10 | 7 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 1 | FHS-M6-12 | 9 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 15 | 1 | FHS-M6-15 | 12 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 18 | 1 | FHS-M6-18 | 15 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 20 | 1 | FHS-M6-20 | 17 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 1 | FHS-M6-25 | 22 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 30 | 1 | FHS-M6-30 | 27 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 35 | 1 | FHS-M6-35 | 32 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M8 | ||||||||||||||
| 15 | 1.25 | FHS-M8-15 | 11 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 18 | 1.25 | FHS-M8-18 | 14 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 20 | 1.25 | FHS-M8-20 | 16 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 25 | 1.25 | FHS-M8-25 | 21 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 30 | 1.25 | FHS-M8-30 | 26 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 5 | 000000000 | 00000 |