About Nuts, Materials, and Finishes
More
Mil. Spec. External Retaining Rings
These rings meet military specification MS16624. Open them with retaining ring pliers (sold separately), pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength. The cadmium-plated finish adds some corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
For Groove | Ring | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For OD | Dia. | Wd. | ID | Thick. | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Cadmium-Plated 1060-1090 Spring Steel | |||||||||||
1/4" | 0.23" | 0.03" | 0.225" | 0.025" | Rockwell C48 | 590 | Magnetic | MS16624 | 25 | 000000000 | 00000 |
5/16" | 0.29" | 0.03" | 0.281" | 0.025" | Rockwell C48 | 750 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
3/8" | 0.352" | 0.03" | 0.338" | 0.025" | Rockwell C48 | 880 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
7/16" | 0.412" | 0.03" | 0.395" | 0.025" | Rockwell C48 | 1,030 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
1/2" | 0.468" | 0.04" | 0.461" | 0.035" | Rockwell C48 | 1,670 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
9/16" | 0.53" | 0.04" | 0.521" | 0.035" | Rockwell C48 | 1,870 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
5/8" | 0.588" | 0.04" | 0.579" | 0.035" | Rockwell C48 | 2,090 | Magnetic | MS16624 | 25 | 000000000 | 0000 |
11/16" | 0.646" | 0.047" | 0.635" | 0.042" | Rockwell C48 | 3,450 | Magnetic | MS16624 | 25 | 000000000 | 00000 |
3/4" | 0.704" | 0.047" | 0.693" | 0.042" | Rockwell C48 | 3,750 | Magnetic | MS16624 | 25 | 000000000 | 00000 |
13/16" | 0.762" | 0.047" | 0.751" | 0.042" | Rockwell C48 | 4,060 | Magnetic | MS16624 | 10 | 000000000 | 0000 |
7/8" | 0.821" | 0.047" | 0.81" | 0.042" | Rockwell C48 | 4,360 | Magnetic | MS16624 | 10 | 000000000 | 0000 |
15/16" | 0.882" | 0.047" | 0.867" | 0.042" | Rockwell C48 | 4,720 | Magnetic | MS16624 | 10 | 000000000 | 0000 |
1" | 0.94" | 0.047" | 0.925" | 0.042" | Rockwell C48 | 5,020 | Magnetic | MS16624 | 10 | 000000000 | 0000 |
1 1/8" | 1.059" | 0.056" | 1.041" | 0.05" | Rockwell C48 | 6,690 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
1 1/4" | 1.176" | 0.056" | 1.156" | 0.05" | Rockwell C48 | 7,460 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
1 3/8" | 1.291" | 0.056" | 1.272" | 0.05" | Rockwell C48 | 8,220 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
1 1/2" | 1.406" | 0.056" | 1.387" | 0.05" | Rockwell C48 | 8,930 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
1 5/8" | 1.529" | 0.068" | 1.583" | 0.062" | Rockwell C46 | 12,000 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
1 3/4" | 1.65" | 0.068" | 1.618" | 0.062" | Rockwell C46 | 12,900 | Magnetic | MS16624 | 1 | 000000000 | 0000 |
No-Slip Clip-On Enclosed Hex Nuts
Also known as cage clip-on nuts, these have a S-style design that provides more strength than other no-slip clip-on nuts. They firmly clip onto the edge of panels and stay secure. All have a finish that resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Panel Thick. | Distance from Ctr. of Hole to Edge | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | |||||
---|---|---|---|---|---|
6-32 | 0.045" to 0.08" | 0.3" | 1 | 000000000 | 00000 |
8-32 | 0.02" to 0.12" | 0.265" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.3" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.395" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.52" | 1 | 000000000 | 0000 |
10-32 | 0.02" to 0.09" | 0.515" | 1 | 000000000 | 0000 |
10-32 | 0.02" to 0.12" | 0.265" | 1 | 000000000 | 0000 |
10-32 | 0.081" to 0.148" | 0.395" | 1 | 000000000 | 0000 |
Mil. Spec. S-Hooks—Not for Lifting
Cadmium-plated steel hooks resist salt water.
For technical drawings and 3-D models, click on a part number.
Capacity, lbs. | Thick. | Hook Opening Wd. | Usable Lg. | Inside Wd. | Specifications Met | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
3 | 1/16" | 3/16" | 13/16" | 1/8" | MS87006 | 5 | 0000000 | 00000 |
10 | 1/8" | 9/16" | 1 7/16" | 5/16" | MS87006 | 5 | 0000000 | 0000 |
20 | 3/32" | 1/16" | 1 1/16" | 3/8" | MS87006 | 5 | 0000000 | 0000 |
20 | 3/32" | 3/16" | 15/16" | 3/16" | MS87006 | 5 | 0000000 | 0000 |
20 | 1/8" | 3/8" | 1 7/16" | 1/4" | MS87006 | 5 | 0000000 | 0000 |
40 | 1/8" | 1/4" | 1 1/16" | 3/16" | MS87006 | 5 | 0000000 | 0000 |
60 | 5/32" | 1/4" | 1 1/16" | 1/4" | MS87006 | 5 | 0000000 | 0000 |