Illuminate machines or monitor processes in environments that reach up to 210° F. These lights have a thick housing that acts as a heat sink to protect the LEDs and driver from overheating. Tough enough for CNC machines, both the housing and glass lens resist impact and vibration. They’re sealed against coolant, lubricant, and chips and shavings. IP rated, they withstand high-temperature washdown sprays and temporary submersion, so they can handle your wettest environments. All have FEP-covered wire leads that withstand heat and hardwire to your 24V DC power supply.

Add a power supply (sold separately) to transform your facility’s 120V AC to 24V DC. Mount the power supply outside of your machine to protect it from heat.

Signal machine status with changing colors—green for running, yellow for standby, red for stopped—then switch to a bright white light to illuminate maintenance or tool changes. Using your programmable logic controller (PLC), you can adjust the brightness of these lights and mix red, green, and blue light to achieve thousands of colors. A tempered glass lens protects them from coolants and lubricants, as well as impacts from chips and shavings. All meet IP67 for protection against dust and temporary submersion, so they hold up in wet or dirty environments. They require a cord (sold separately) to connect to your PLC.

Lights with IO link let you control color, brightness, and flashing patterns when used with IO link-enabled machines.

Magnetic mounting brackets (sold separately) allow for quick, temporary installation on metal surfaces inside your machine.

More than twice as wide as strip lights, these lights brighten a broader area—ideal for large CNC machines. The extra coverage reduces shadows during maintenance and tool changeovers. A tempered glass lens shields against flying chips and coolant splashes to keep these lights shining in tough conditions.

Choose lights with a side or back electrical connection to route cables where they fit best for your setup. Lights with a corner connection give you extra flexibility when routing cables—the connection swivels in any direction.

Lights with an M12 plug require a cord (sold separately) to connect to your 24V DC power supply. They’re compatible with sockets that have 3 or 4 poles. Hardwire lights can be wired to your 24V DC power supply.

All meet IP67 for protection against dust and temporary submersion, so they hold up in wet and dirty environments. Lights that are rated IP69K withstand high-temperature, high-pressure washdowns.

Add adjustable mounting brackets to angle these lights.

Add rocker switches in easy-to-reach spots to manually turn lights on and off.

Add a power supply to transform your facility’s 120V AC into 24V DC.

Mount these lights into an opening in your CNC machine. They sit flush with the surface for a streamlined look, and they free up space for setting up or maintaining your machine. A tempered glass lens protects them from coolants and lubricants, as well as impacts from chips and shavings. Rated IP67, these lights are sealed to protect them from dust and temporary submersion in water. They’re also rated IP69K for protection from high-temperature sprays from washdowns. All require a cord (sold separately) to connect to your 24V DC power supply. M12 plugs are compatible with cords that have the same number of poles or more.

Add a power supply (sold separately) to transform your facility’s 120V AC into 24V DC.