McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    144 Products

    5-Axis Tabletop CNC Milling Machines

    Image of Product. Front orientation. Milling Machines. 5-Axis Tabletop CNC Milling Machines .
    Image of Product. Front orientation. ZoomedIn view. Milling Machines. 5-Axis Tabletop CNC Milling Machines .
    With a tilting, rotating table, these milling machines create more complex shapes than 3-axis models without requiring multiple setups. By moving the spindle and rotating the workpiece simultaneously, they’re capable of making helical gears, manifolds, and other small parts that require 3D contouring, hollowing, and undercutting. Similar in size to a desktop printer, they mill plastic, wood, and soft metal pieces up to 4.55" × 5" × 3.55" for rapid prototyping of small-parts; however, they’re not for production-scale work. They are compatible with 2D and 3D CAD files.
    Machines move on five axes: the spindle travels 4.55" side to side; the table travels 5" front to back, 3.55" up and down, tilts 160°, and rotates 360°. They have a 200W brushless DC motor that powers the spindle up to 10,000 rpm with 0.002" of TIR (total indicated runout). TIR is a measure of rotational smoothness—the lower the value, the less wobble a rotating tool will have, and the more accurate it will be.
    All have a single-flute, carbide square end mill for making square slots, pockets, and edges. A tool length measurement device ensures accurate cuts, even when switching tools. A steel enclosure contains chips and reduces noise.
    Machines include a 1/8" ER-11 collet for holding round-shank tools, such as router bits, drill bits, and end mills, with shank sizes from 0.109" to 1/8".
    Overall
    Max.
    Workpiece
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    No. of
    Axes
    Wt.,
    lb.
    For Collet
    Type
    Spindle Speed,
    rpm
    Frame
    Material
    Enclosure
    Material
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Each
    120V AC
    17 1/2"23"11 1/2"4.55"5"3.55"537ER-112,000 to 10,000Aluminum
    		Steel0.002"Tool Length Measurement DeviceEnclosure, USB Cable, 1/8" Carbide Square End Mill, 1/8" ER-11 Collet, Collet Wrench, Tool Holder, Vise2991N11000000000
     
    Accessories and Replacements for Milling Machines
    Replacement Spindle Motors
    Image of Product. Front orientation. Electric Motors. 5-Axis Tabletop CNC Milling Machines .
    Torque,
    in·lbf
    Insulation
    Overall
    Shaft,
    mm
    Max. Rotation
    Speed, rpm
    Voltage,
    V DC
    Full Load
    Current, amp
    Wattage,
    kW
    Motor Frame
    Size
    Max.
    Continuous
    Class
    Max. Temp.,
    ° F
    Lg.
    Wd.
    Ht.
    Dia.
    Lg.
    Total Indicated Runout
    (TIR) Accuracy
    Collet
    Type
    Each
    14,4004824.90.211NEMA 240.310.1F3116.1"2.4"2.8"30520.0005"ER-114856N110000000
    ER-11 Collets
    Image of Product. Front orientation.
    ER-11 Collets—Use additional ER-11 collets to hold tools that have larger shank sizes.
    Collet
    Size
    Grip Range
    Workpiece Dia.
    Tolerance
    Max. Body
    Dia.
    Overall
    Lg.
    Material
    Approx. Dia.
    Compression
    Each
    1/8"0.109" to 0.125"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N12000000
    3/16"0.172" to 0.187"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N1300000
    1/4"0.234" to 0.250"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N1100000
    Edge Finders with Holders
    Image of Product. Front orientation. Edge Finders. 5-Axis Tabletop CNC Milling Machines .
    Edge finders with holders mount directly into the spindle. They locate edges, shoulders, center points, and lines on your workpiece.
    Edge Finder
    Body Dia.
    Tip
    Dia.
    Material
    Each
    3/8"0.2"Steel3991N140000000
    ER-40 Collets with Adapters
    Image of Product. Front orientation. Exploded view.
    ER-40 Collets with Adapters—ER-40 collets with adapters fit inside the hole in the center of the machine’s table to hold round workpieces. Because the workpiece passes through the table, it allows clearance for machining longer pieces.
    Collet
    Size
    Material
    For Dia.
    Overall
    Lg.
    OD
    Material
    Includes
    Each
    1"Steel1/8" to 1 1/8", 3 mm to 28 mm1.15"2.09"Aluminum, SteelER-40 Wrench3991N120000000
    Tool Holder Sets
    Image of Product. Front orientation. Milling Machine Tool Holders. 5-Axis Tabletop CNC Milling Machines .
    Tool holder sets include three extended tool holders, one standard tool holder, and a stand to hold all four. Standard tool holders are for tools that are longer than 2 1/2"; extended tool holders are for tools that are 2 1/2" in length and shorter.
    For No.
    of Tools
    For Max.
    Tool Size
    Material
    Includes
    Each
    51/4"Aluminum
    		One Stand, One Standard Tool Holder, Three Extended Tool Holders3991N110000000

    3-Axis Tabletop CNC Milling Machines

    Image of Product. Front orientation. Milling Machines. 3-Axis Tabletop CNC Milling Machines .
    Design and machine small parts for rapid prototyping. Similar in size to a desktop printer, these CNC machines mill plastic, wood, copper, aluminum, and other soft metals up to 8" × 8" × 3". Compared to manual milling machines, they are faster, more consistent, and able to create more complex shapes; however, they are not for production-scale work. Use them for milling contoured 3D objects, printed circuit boards (PCBs), and small parts such as gears, retaining rings, and shims. They are compatible with 2D and 3D CAD files and include software for creating 2D designs from scratch, no experience required.
    Machines move on three axes: the spindle travels 8" side to side and 3" up and down; the table travels 8" front to back. They have a 130W brushless DC motor that powers the spindle up to 24,000 rpm with 0.0001" of TIR (total indicated runout). TIR is a measure of rotational smoothness—the lower the value, the less wobble a rotating tool will have, and the more accurate it will be.
    All include one square end mill for making square slots, pockets, and edges and one ball end mill for making rounded slots, slopes, and contours. A tool length measurement device ensures accurate cuts, even when switching tools. A 1/2" MDF wasteboard protects the end mill from damage, similar in principle to a kitchen cutting board. The built-in enclosure contains chips and reduces noise.
    Machines also include a 1/8" ER-11 collet for holding round-shank tools, such as router bits, drill bits, and end mills, with shank sizes from 0.109" to 1/8".
    Overall
    Max.
    Workpiece
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    No. of
    Axes
    Wt.,
    lb.
    For Collet
    Type
    Spindle Speed,
    rpm
    Frame
    Material
    Enclosure
    Material
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Each
    120V AC
    17"17 1/2"19"3"8"8"360ER-119,000 to 24,000Aluminum
    		Wood0.0001"Enclosure, Lights, Tool Length Measurement DeviceCarbide Create (2D CAD/CAM) Software, MeshCAM (3D CAM) Software, USB Cable, 1/8" Carbide Square End Mill, 1/8" ER-11 Collet, Collet Wrench, 1/2" MDF Wasteboard, 1/8" Carbide Round End Mill, BitZero 2.0 Probe, Alibre (3D CAD/CAM) Software, Spindle Wrench6228N1000000000
     
    Accessories for Milling Machines
    ER-11 Collets
    Image of Product. Front orientation.
    ER-11 Collets—Use additional ER-11 collets to hold tools that have larger shank sizes.
    Collet
    Size
    Grip Range
    Workpiece Dia.
    Tolerance
    Max. Body
    Dia.
    Overall
    Lg.
    Material
    Approx. Dia.
    Compression
    Each
    1/8"0.109" to 0.125"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N12000000
    3/16"0.172" to 0.187"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N1300000
    1/4"0.234" to 0.250"-0.0001" to 0.0001"0.46"0.71"Steel1/64"4560N1100000
    Tabletop Milling Machine Fixtures
    Image of Product. Front orientation. Tabletop Milling Machine Fixtures. 3-Axis Tabletop CNC Milling Machines .
    Tabletop milling machine fixtures attach to the table and hold the workpiece in place to save time and prevent mistakes when machining both sides of the workpiece. When one side is done, turn the fixture over and the other side is already in place, no edge-finders or recalibration needed.
    Max.
    Workpiece
    Wd.
    Dp.
    Ht.
    Material
    Mounting Hardware
    Included
    Each
    5"1.2"3"Aluminum
    		Yes5607N20000000
    Grid Fixture Plates
    Image of Product. Front orientation. Grid Fixture Plates. 3-Axis Tabletop CNC Milling Machines .
    Fixture plates have an array of M6 × 1 mm threaded holes to support various clamps and workholding setups. Attach the fixture plate to the machine’s table using the included fasteners.
    Lg.
    Wd.
    Thk.
    No. of
    Holes
    Hole Size,
    mm
    Material
    Mounting Hardware
    Included
    Each
    8"8"1/2"856Aluminum
    		Yes5607N30000000
    Vises
    Image of Product. Front orientation. Vises.
    Vises firmly hold the workpiece for precise machining. They are sized to fit the machine’s table; attach with the included fasteners.
    Lg.
    Wd.
    Max. Jaw
    Opening
    Material
    Mounting Hardware
    Included
    Each
    8"2"6 1/2"Aluminum
    		Yes5607N10000000

    Bench-Top Combination Lathe, Mill, and Drill Machines

    Image of ProductInUse. Shown with Workbench (Sold Separately). Front orientation. Lathes. Bench-Top Combination Lathe, Mill, and Drill Machines.
    Image of Product. Front orientation. Lathes. Bench-Top Combination Lathe, Mill, and Drill Machines.

    Shown with Workbench (Sold

    Separately)

    Turn, knurl, thread, mill, and drill workpieces with these compact machines. They can switch between rotating a blade and rotating a workpiece, so you can complete every step of fabrication. Small enough to fit on a workbench, they’re often used in tool rooms and maintenance shops—they’re best for prototyping and one-off jobs. A cast iron frame makes these machines durable and stable. For smooth motion, they have precision bearings in the headstock and spindle. All are built and tested to DIN 8606 standards for accuracy and performance.
    Twist knobs on the front to choose from six spindle speeds, and you can tailor the cuts to different materials and tasks. These machines have set speeds, so you can’t fine-tune them with as much precision as variable-speed machines.
    Lathe
    Spindle
    Max.
    Workpiece
    Overall
    No. of
    Speeds
    Speed, rpm
    Mill Spindle
    Speed, rpm
    Dia.
    Lg.
    Turning
    Dia.
    Bed
    Wd.
    Spindle
    Taper No.
    Lathe Spindle
    Taper No.
    Lathe Tailstock
    Taper No.
    Lathe Spindle
    Through-Hole Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Specs.
    Met
    Each
    120V AC
     
    1 hp Lathe Brushless Motor—5/8 hp Mill/Drill Brushless Motor
    6125 to 2,000100 to 3,0009"20"9 13/16"5 7/8"Morse 4Morse 3Morse 21"34"49"23"4630.0005"Chip Guard, Safety Guard4-Way Tool Post, Gear Set, Manual Lathe Chuck, Two Dead CentersDIN 86069432N111000000000
     
    1 hp Lathe Brushless Motor—1 hp Mill/Drill Brushless Motor
    6150 to 2,000100 to 3,00011"27"11"7 1/16"Morse 4Morse 4Morse 21"39"55"29"5500.0005"Chip Guard, Safety Guard4-Way Tool Post, Gear Set, Manual Lathe Chuck, Two Dead CentersDIN 86069432N11200000000
     
    Accessories for Lathes
    Displays
    Image of Product. Front orientation. Lathe Displays. Bench-Top Combination Lathe, Mill, and Drill Machines.
    Lathe displays show the tool position in real time, which helps you machine more accurately.
    2 Axes—Two-axis displays show the X and Y axes, which give you the position of the lathe.
    3 Axes—Three-axis displays also show the Z axis.
    Display
    No. of
    Axes
    Lg.
    Wd.
    Ht.
    Mounting Fasteners
    Included
    Each
    23 7/8"2 1/2"5 1/4"Yes9433N1220000000
    33 7/8"2 1/2"5 1/4"Yes9433N12400000000
    Workbenches
    Image of Product. Front orientation. Workbenches. Bench-Top Combination Lathe, Mill, and Drill Machines.
    Workbenches are made of steel and sized specifically for these machines.
    Shelves
    Ht.
    Wd.
    Dp.
    Overall Wt.
    Cap., lb.
    Material
    Color
    Ga.
    No. of
    Doors
    No.
    of
    Movement
    Wt. Cap.,
    lb.
    Assembly
    Each
    29.25"35.5" to 47"16"700Powder-Coated SteelBlue1622Fixed150Unassembled9442N1110000000

    Floor Manual Lathes

    Image of Product. Front orientation. Lathes. Floor Manual Lathes.
    Often found in tool rooms and maintenance shops, these powerful lathes are used for turning, facing, threading, boring, and knurling. They’re built and tested to DIN 8606 standards for accuracy and performance. The frame and bed are made of cast iron for stability and a long service life. For precise, repeatable motion, these lathes have hardened and ground ways. They also have helical gears for smooth power transmission.
    Twist the knobs on the front to choose from 18 spindle speeds to tailor cuts to different materials and tasks. Because these lathes have set speeds, you can’t fine-tune them with as much precision as variable-speed lathes.
    Use the hinged door and drawers in the base for tool storage.
    Spindle
    Max.
    Workpiece
    Overall
    No. of
    Speeds
    Speed, rpm
    Dia.
    Lg.
    Turning
    Dia.
    Bed
    Wd.
    Spindle
    Taper No.
    Lathe Tailstock
    Taper No.
    Spindle Through-Hole
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Specs.
    Met
    Each
    120V AC/240V AC—2 hp Brushed Motor
    1865 to 1,80012"36"7 15/32"7 1/4"Morse 5Morse 31 1/2"56"66"30"1,1600.001"Built-In Worklight (Bulb included), Chip Guard, Safety Guard4-Way Tool Post, Follow Rest, Four-Jaw Manual Lathe Chuck, Gear Set, Live Center, Manual Lathe Chuck, Steady RestDIN 86069431N111000000000
     
    Displays
    Image of Product. Front orientation. Lathe Displays. Floor Manual Lathes.
    Lathe displays show the tool position in real time, which helps you machine more quickly and accurately.
    Display
    No. of
    Axes
    Lg.
    Wd.
    Ht.
    Mounting Fasteners
    Included
    Each
    311"2 3/4"7 1/4"Yes9433N1230000000

    Bench-Top Manual Lathes

    Image of ProductInUse. Shown with Workbench (Sold Separately). Front orientation. Lathes. Bench-Top Manual Lathes.
    Image of Product. Front orientation. Lathes. Bench-Top Manual Lathes.

    Shown with Workbench (Sold

    Separately)

    Compact enough for a workbench, these lathes are best for prototyping and one-off jobs in tool rooms or fabrication and maintenance shops. They do everything a full-size lathe can—turning, facing, threading, and knurling. Built from cast iron, they’re durable and stable. Plus, they have precision bearings in the headstock and spindle. They meet DIN 8606 for accuracy and performance.
    Choose from six spindle speeds to tailor cuts to different materials and tasks. Because the speeds are set, you can’t fine-tune these lathes like you can with a variable-speed lathe.
    Spindle
    Max.
    Workpiece
    Overall
    No. of
    Speeds
    Speed, rpm
    Dia.
    Lg.
    Turning
    Dia.
    Bed
    Wd.
    Spindle
    Taper No.
    Lathe Tailstock
    Taper No.
    Spindle Through-Hole
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Specs.
    Met
    Each
    120V AC—1 hp Brushless Motor
    6150 to 2,4009"21 5/8"9 13/16"5 5/16"Morse 4Morse 21 1/64"19"50"23"2800.001"Chip Guard, Safety Guard4-Way Tool Post, Gear Set, Manual Lathe Chuck, Two Dead CentersDIN 86069433N121000000000
     
    Accessories for Lathes
    Displays
    Image of Product. Front orientation. Lathe Displays. Bench-Top Manual Lathes.
    Lathe displays show real-time tool positioning along two axes for increased machining accuracy.
    Display
    No. of
    Axes
    Lg.
    Wd.
    Ht.
    Mounting Fasteners
    Included
    Each
    23 7/8"2 1/2"5 1/4"Yes9433N1220000000
    Workbenches
    Image of Product. Front orientation. Workbenches. Bench-Top Manual Lathes.
    Workbenches are made of steel and sized specifically for these lathes.
    Shelves
    Ht.
    Wd.
    Dp.
    Overall Wt.
    Cap., lb.
    Material
    Color
    Ga.
    No. of
    Doors
    No.
    of
    Movement
    Wt. Cap.,
    lb.
    Assembly
    Each
    29.25"35.5" to 47"16"700Powder-Coated SteelBlue1622Fixed150Unassembled9442N1110000000

    Bench-Top Manual Milling Machines

    Image of ProductInUse. Shown with Workbench (Sold Separately). Front orientation. Milling Machines. Bench-Top Manual Milling Machines .
    Image of Product. Front orientation. Milling Machines. Bench-Top Manual Milling Machines .

    Shown with

    Workbench (Sold

    Separately)

    Compact but powerful, these machines can mill, drill, tap, bore, and more. Since they fit on a workbench, they’re a good choice for job shops, maintenance departments, and other multipurpose spaces. The table is cast iron for strength and stability, and they have heavy duty tapered roller bearings. A digital readout displays real-time tool positioning along two axes for increased machining accuracy.
    Overall
    Max.
    Workpiece
    Spindle
    Ht.
    Wd.
    Dp.
    Ht.
    Dp.
    No. of
    Axes
    Wt.,
    lb.
    Speed, rpm
    Taper
    No.
    Travel
    Total Indicated Runout
    (TIR) Accuracy
    Features
    Includes
    Each
    120V DC—1 1/5 hp Brushless Motor
    34"27"22"13"7"223090 to 3,000Morse 21 31/32"0.0005"Built-In Worklight (Bulb included), Drilling Depth Digital Readout, Safety Guard, Spindle Speed Digital ReadoutDepth Stop, Tool Holder9441N111000000000
     
    Workbenches
    Image of Product. Front orientation. Workbenches.
    Workbenches are made of steel and sized for these milling machines.
    Ht.
    Wd.
    Dp.
    Overall Wt.
    Cap., lb.
    Material
    Color
    Ga.
    No. of
    Doors
    Assembly
    Features
    Each
    36"29"17"250Powder-Coated SteelBlue161AssembledRemovable Chip Tray9442N1120000000

    Coordinate Measurement Machine Probes for CNC Lathes

    Take 3D measurements even in the harsh machining conditions of a CNC lathe. IP rated and built with a strengthened glass window, these probes seal out coolant and resist scratches from flying metal chips. Integrate them into your lathe’s control system to catch errors while your part is still on the machine—saving time and cutting down on material waste. Since they physically touch a part one point at a time, they accurately check distances, diameters, and angles. They can also be used to position a workpiece, locate holes and grooves, and check for scratches, dents, or other imperfections. However, they don’t work well on more complex features, like how round or flat a part is.
    All probes require a probe styli. You’ll also need a receiver and an interface (sold separately) to communicate with your CNC lathe. Receivers send your probe’s data to interfaces, which need to be wired to your lathe’s control panel.
    Probes
    Image of Product. Top orientation. Contains Annotated. Coordinate Measurement Machine Probes for CNC Lathes.
    Coordinate Measurement Machine Probes
    Replacement
    Batteries
    For Stylus
    Trigger
    Force, N
    Dia.,
    mm
    Lg.,
    mm
    Thread
    Size
    O'all Lg.,
    mm
    For Axis Measuring
    Direction
    X- and
    Y-Axis
    Z-Axis
    Repeatability,
    mm
    Max. Distance
    from Receiver, m
    Enclosure
    Rating
    Manufacturer
    (Series)
    Each
    Pkg.
    Qty.
    Pkg.
    Infrared
    4058M4
    		50 to 150±X, ±Y, +Z0.4, 0.85.3-0.001 to 0.0015IK02, IP08Renishaw (OLP40)6192N1100000000016951K5900000
     
    Radio
    4058M4
    		50 to 150±X, ±Y, +Z0.6, 0.976.23-0.001 to 0.00115IK02, IP08Renishaw (RLP40-QE)6192N120000000016951K590000
     
    Accessories for Coordinate Measurement Machine Probes
    Receivers
    Image of Product. Receiver. Front orientation. Coordinate Measurement Machine Probe Receivers.

    Receiver

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view. These probes are typically found in small lathes with chuck sizes around 8” and medium lathes with chuck sizes around 15”. They can also be used on a 5-axis CNC with a table size under 1,500 mm.
    Component
    For Max. No.
    of Probes
    Wire
    Connection
    Cord Lg.,
    ft.
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    Receiver4Wire Leads82Renishaw (OMM-2)6206N13000000000
     
    Interfaces
    Image of Product. Interface. Front orientation. Coordinate Measurement Machine Probe Interfaces.

    Interface

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view. These probes are typically found in small lathes with chuck sizes around 8” and medium lathes with chuck sizes around 15”. They can also be used on a 5-axis CNC with a table size under 1,500 mm.
    Component
    Wire
    Connection
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    InterfaceScrew TerminalRenishaw (OSI)6206N14000000000
     
    Receivers/Interfaces
    Image of Product. Receiver/Interface. Front orientation. Coordinate Measurement Machine Probe Interface/Receivers.

    Receiver/Interface

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view. These probes are typically found in small lathes with chuck sizes around 8” and medium lathes with chuck sizes around 15”. They can also be used on a 5-axis CNC with a table size under 1,500 mm.
    For Radio Probes—Radio probes send data to a receiver up to 15 meters away. They block out interference from other radio devices, so you can use multiple radio probes in one machine shop. They’re used in small, medium, and large lathes with a chuck size up to 24". They can also be used on a 5-axis CNC with a table size under 3,500 mm.
    Component
    For Max. No.
    of Probes
    Wire
    Connection
    Cord Lg.,
    ft.
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    Receiver/Interface2Wire Leads26Renishaw (OMI-2T)6206N31000000000
     
    For Radio Probes
    Receiver/Interface4Wire Leads49Renishaw (RMI-Q)6206N1900000000
     
    Receiver Mounting Brackets
    Image of Product. Front orientation. Brackets.
    Receiver mounting brackets make it easy to attach a receiver or receiver/interface to your lathe.
    Color
    Material
    Mounting Fasteners
    Included
    Mfr.
    Mfr. Model
    No.
    Each
    BlackPowder-Coated SteelYesRenishawA-2033-08306206N210000000
    Shanks
    Image of Product. Top orientation. Coordinate Measurement Machine Probe Shanks. Coordinate Measurement Machine Probes for CNC Lathes.
    Use a shank to attach a probe to the spindle on your CNC lathe.
    For Probe
    Dia., mm
    Shank Type
    For Probe Mfr.
    Series
    Mfr.
    Mfr. Model
    No.
    Each
    40Round (1/2" Dia.)OLP40, RLP40-QERenishawA-5625-10046192N140000000
    40Round (1" Dia.)OLP40, RLP40-QERenishawA-5625-10076192N15000000
    40Round (25 mm Dia.)OLP40, RLP40-QERenishawA-5625-10036192N13000000
    Conduit Assemblies
    Image of Product. Front orientation. Conduit and Fittings.
    Conduit assemblies protect wiring from coolant and metal chips.
    Conduit
    Trade Size
    Cord Lg.,
    ft.
    Mfr.
    Mfr. Model
    No.
    Each
    5/16
    		3RenishawA-4113-03066206N15000000

    Coordinate Measurement Machine Probes for CNC Machines

    Measure parts in 3D while they're still on your CNC machine. These probes integrate into your machine’s control system to save you time and help you keep parts in tolerance while machining. Because they measure with a stylus (not included) that physically touches your part one point at a time, they accurately check distances, diameters, and angles. They can also be used to position a workpiece, locate holes and grooves, and check for scratches and dents. However, they don't work well on more complex measurements, like how round or flat a part is. IP rated, they’re watertight enough to handle submersion, so you don’t have to worry about coolant seeping in.
    All probes require a receiver and an interface (sold separately) to communicate with your CNC machine. Receivers send your probe’s data to interfaces, which need to be wired to your machine’s control panel.
    Probes
    Image of Product. Top orientation. Contains Annotated. Coordinate Measurement Machine Probes for CNC Machines.
    Infrared—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view.
    Radio— Radio probes send data to a receiver up to 15 meters away. They block out interference from other radio devices, so you can use multiple radio probes in one machine shop.
    40 mm Diameter—40 mm probes are typically found in small and medium machines with a chuck size between 6" and 15".
    63 mm Diameter—63 mm probes are typically found in medium to large machines with a chuck size between 10" and 24".
    Coordinate Measurement Machine Probes
    Replacement
    Batteries
    For Stylus
    Trigger
    Force, N
    Dia.,
    mm
    Lg.,
    mm
    Thread
    Size
    O'all Lg.,
    mm
    For Axis Measuring
    Direction
    X- and
    Y-Axis
    Z-Axis
    Repeatability,
    mm
    Max. Distance
    from Receiver, m
    Enclosure
    Rating
    Manufacturer
    (Series)
    Each
    Pkg.
    Qty.
    Pkg.
    Infrared
    4050M4
    		50 to 150±X, ±Y, +Z0.5, 0.95.85-0.001 to 0.0015IK01, IP08Renishaw (OMP40)6206N1100000000016951K5900000
    6376M4
    		50 to 150±X, ±Y, +Z0.75, 1.45.3-0.001 to 0.0016IP08
    		Renishaw (OMP60)6206N120000000016951K570000
     
    Radio
    4050M4
    		50 to 150±X, ±Y, +Z0.5, 0.95.85-0.001 to 0.00115IK01, IP08Renishaw (RMP40-QE)6206N170000000016951K590000
    6376M4
    		50 to 150±X, ±Y, +Z0.75, 1.45.3-0.001 to 0.00115IP08
    		Renishaw (RMP60-QE)6206N180000000016951K570000
     
    Accessories for Coordinate Measurement Machine Probes
    Receivers
    Image of Product. Receiver. Front orientation. Coordinate Measurement Machine Probe Receivers.

    Receiver

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view.
    Component
    For Max. No.
    of Probes
    Wire
    Connection
    Cord Lg.,
    ft.
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    Receiver4Wire Leads82Renishaw (OMM-2)6206N13000000000
     
    Interfaces
    Image of Product. Interface. Front orientation. Coordinate Measurement Machine Probe Interfaces.

    Interface

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view.
    Component
    Wire
    Connection
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    InterfaceScrew TerminalRenishaw (OSI)6206N14000000000
     
    Receivers/Interfaces
    Image of Product. Receiver/Interface. Front orientation. Coordinate Measurement Machine Probe Interface/Receivers.

    Receiver/Interface

    For Infrared Probes—Infrared probes send data to a receiver up to 5 meters away, but because they use light, they need a clear view.
    For Radio Probes— Radio probes send data to a receiver up to 15 meters away. They block out interference from other radio devices, so you can use multiple radio probes in one machine shop.
    Component
    For Max. No.
    of Probes
    Wire
    Connection
    Cord Lg.,
    ft.
    Manufacturer
    (Series)
    Each
    For Infrared Probes
    Receiver/Interface2Wire Leads26Renishaw (OMI-2T)6206N31000000000
     
    For Radio Probes
    Receiver/Interface4Wire Leads49Renishaw (RMI-Q)6206N1900000000
     
    Receiver Mounting Brackets
    Image of Product. Front orientation. Brackets.
    Receiver mounting brackets make it easy to attach a receiver or receiver/interface to your machine.
    Color
    Material
    Mounting Fasteners
    Included
    Mfr.
    Mfr. Model
    No.
    Each
    BlackPowder-Coated SteelYesRenishawA-2033-08306206N210000000
    Shanks
    Image of Product. Top orientation. Coordinate Measurement Machine Probe Shanks. Coordinate Measurement Machine Probes for CNC Machines.
    Use a shank to attach a probe to the spindle on your CNC machine.
    For Probe
    Dia., mm
    Shank Type
    For Probe Mfr.
    Series
    Mfr.
    Mfr. Model
    No.
    Each
    40BT 40 TaperOMP40, RMP40-QERenishawM-4071-00576206N260000000
    40BT 50 TaperOMP40, RMP40-QERenishawM-4071-00716206N27000000
    40CAT 40 TaperOMP40, RMP40-QERenishawM-4071-00586206N22000000
    40CAT 50 TaperOMP40, RMP40-QERenishawM-4071-00726206N23000000
    63BT 40 TaperOMP60, RMP60-QERenishawM-2045-00276206N28000000
    63BT 50 TaperOMP60, RMP60-QERenishawM-2045-00736206N29000000
    63CAT 40 TaperOMP60, RMP60-QERenishawM-2045-00696206N24000000
    63CAT 50 TaperOMP60, RMP60-QERenishawM-2045-00716206N25000000
    Shank Adapters
    Image of Product. Top orientation. Coordinate Measurement Machine Probe Shank Adapters.
    Add a shank adapter to fit 40 mm probes to shanks made for 63 mm probes.
    For Probe Manufacturer
    Series
    Compatible with Shanks for
    Probe Manufacturer Series
    Mfr.
    Mfr. Model
    No.
    Each
    OMP40, RMP40-QEMP11, MP12, MP700, MP700E, OMP60, RMP60-QERenishawA-4071-00316206N160000000
    Conduit Assemblies
    Image of Product. Front orientation. Conduit and Fittings.
    Conduit assemblies protect wiring from coolant and metal chips.
    Conduit
    Trade Size
    Cord Lg.,
    ft.
    Mfr.
    Mfr. Model
    No.
    Each
    5/16
    		3RenishawA-4113-03066206N15000000

    Rigid Cylinder Hones for Machine Tools

    Image of System. Front orientation. Exploded view. Contains Annotated. Cylinder Hones. Rigid Cylinder Hones for Machine Tools.
    Image of ProductInUse. Front orientation. Cylinder Hones. Rigid Cylinder Hones for Machine Tools.
    Turn your drill press, lathe, mill, or CNC machine into a precision honing system. These hones finish cylinder diameters as small as 3/16" to within a 0.001" tolerance. They correct out-of-round holes, slots, keyways for shafts, bushings, and dowel pins. To retain lubricants, they leave a cross-hatch pattern on cylinder walls. Install the hone’s driver in your spindle and guide or program your machine to move the hone up and down to create the pattern.
    Drivers
    Image of Product. Front orientation. Cylinder Hones. Rigid Cylinder Hones for Machine Tools, Drivers.
    Use these drivers to adjust honing stones forward or backward on a tapered mandrel for a precise cylinder fit. One driver pairs with all the mandrels—just swap the mandrel to hone a different size.
    For Cylinder
    ID
    Shank
    Dia.
    Overall
    Lg.
    Each
    3/16" to 3"1/2"9"8253N5000000000
    Honing Kits
    Image of Product. Front orientation. Cylinder Hones. Rigid Cylinder Hones for Machine Tools, Honing Kits.
    Each kit contains a mandrel, two honing stones, and a truing sleeve. The mandrel holds the honing stones and snaps into a driver with a quick twist. Since the mandrel doesn’t touch the work surface, it won’t wear out and need replacing. The truing sleeve conditions the honing stones so they’re perfectly cylindrical and concentric to the mandrel.
    Kits
    Replacement
    Cylinder Honing Stones
    Replacement Cylinder Honing
    Stone Truing Sleeves
    For
    Cylinder ID
    Actual
    Nominal
    For Cylinder ID
    Tolerance
    Mandrel
    Lg.
    Grit (For
    Finish)
    Abrasive
    Lg.
    Recommended
    Speed, rpm
    No. of
    Stones
    Includes
    Each
    No. of
    Pieces
    Each
    Each
    0.177" to 0.209"3/16"-0.001" to 0.001"4"220 Grit (Smooth)1"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N11000000028253N1120000008253N1130000000
    0.209" to 0.24"7/32"-0.001" to 0.001"4"220 Grit (Smooth)1"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1200000028253N122000008253N123000000
    0.24" to 0.302"1/4"-0.001" to 0.001"3 1/4"220 Grit (Smooth)3/4"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1300000028253N132000008253N133000000
    0.302" to 0.365"5/16"-0.001" to 0.001"4"220 Grit (Smooth)1 1/8"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1400000028253N142000008253N143000000
    0.365" to 0.427"3/8"-0.001" to 0.001"5"220 Grit (Smooth)1 1/2"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1500000028253N152000008253N153000000
    0.427" to 0.49"7/16"-0.001" to 0.001"5"220 Grit (Smooth)1 1/2"8002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1600000028253N162000008253N163000000
    0.49" to 0.552"1/2"-0.001" to 0.001"5 3/4"220 Grit (Smooth)1 15/16"6002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1700000028253N172000008253N173000000
    0.552" to 0.615"9/16"-0.001" to 0.001"5 3/4"220 Grit (Smooth)1 15/16"6002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1800000028253N182000008253N183000000
    0.615" to 0.677"5/8"-0.001" to 0.001"6"220 Grit (Smooth)2 1/2"4002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N1900000028253N192000008253N193000000
    0.677" to 0.74"11/16"-0.001" to 0.001"6"220 Grit (Smooth)2 1/2"4002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2100000028253N212000008253N213000000
    0.74" to 0.865"3/4"-0.001" to 0.001"6 5/8"220 Grit (Smooth)3"4002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2200000028253N222000008253N223000000
    0.865" to 0.99"7/8"-0.001" to 0.001"7 1/8"220 Grit (Smooth)3 1/2"4002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2300000028253N232000008253N233000000
    0.99" to 1.115"1"-0.001" to 0.001"7 5/8"220 Grit (Smooth)3 1/2"4002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2400000028253N242000008253N243000000
    1.115" to 1.24"1 1/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"3002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2500000028253N252000008253N253000000
    1.24" to 1.365"1 1/4"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"3002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2600000028253N262000008253N263000000
    1.365" to 1.49"1 3/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"3002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2700000028253N272000008253N273000000
    1.49" to 1.615"1 1/2"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"3002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2800000028253N282000008253N283000000
    1.615" to 1.74"1 5/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"2002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N2900000028253N292000008253N293000000
    1.74" to 1.865"1 3/4"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"1002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3100000028253N312000008253N313000000
    1.865" to 1.99"1 7/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"1002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3200000028253N322000008253N323000000
    1.99" to 2.115"2"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"1002One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3300000028253N332000008253N333000000
    2.115" to 2.24"2 1/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3400000028253N342000008253N343000000
    2.24" to 2.365"2 1/4"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3500000028253N352000008253N353000000
    2.365" to 2.49"2 3/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3600000028253N362000008253N363000000
    2.49" to 2.615"2 1/2"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3700000028253N372000008253N373000000
    2.615" to 2.74"2 5/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3800000028253N382000008253N383000000
    2.74" to 2.865"2 3/4"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N3900000028253N392000008253N393000000
    2.865" to 2.99"2 7/8"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N4100000028253N412000008253N413000000
    2.99" to 3.115"3"-0.001" to 0.001"7 5/8"220 Grit (Smooth)4"502One Mandrel
    Two Honing Stones
    One Truing Sleeve    		8253N4200000028253N422000008253N423000000
    Cylinder Hone Driver Adapters
    Image of Product. Front orientation. Cylinder Hone Driver Adapters.
    Enable Sunnen horizontal honing machine to accept our mandrels, stones, and truing sleeves.
    For Cylinder
    ID
    For
    Mfr.
    For Mfr. Model No.
    Each
    3/16" to 3"SunnenLBB, MBB1600, MBB16608253N60000000

    Plotter Pen Router Bits

    Image of Product. Front orientation. Plotter Pen Router Bits.
    Test new designs without ruining your material—these bits hold a pen rather than a blade, so you can trace a CNC machine’s path before you cut. Spot errors, adjust your design, and trace again. For repeat testing on metal, glass, and plastic, you can wipe the ink off with acetone. Turn your spindle off to hold the marker steady and draw clean lines.
    Router Bits
    Replacement Pens
    Tip
    Size
    Stroke
    Wd., mm
    For Use On
    Drying
    Time
    Shank
    Dia.
    Overall
    Lg.
    For Tool
    Type
    Includes
    Each
    Each
    Uncoated Brass
     
    Fluteless
    Medium1.3Ceramic, Foam, Glass, Particleboard, Plastic, Plywood, Steel, WoodInstant1/2"4 1/16"CNC MachineFour Pens (Black, Blue, Green, Red)6576N110000006576N12000000
     

    Deburring Tool Holders

    Image of System. Top orientation. Exploded view. Contains Annotated. Deburring Tool Holders.
    Image of ProductInUse. Top orientation. Contains Annotated. Deburring Tool Holders. Fixed Spring Load.
    Image of ProductInUse. Top orientation. Contains Annotated. Deburring Tool Holders. Adjustable Spring Load.

    Fixed Spring Load

    Adjustable Spring

    Load

    Image of Attribute. For Front Side. Side1 orientation. Contains Annotated. For Front Side.
    Image of Attribute. For Back Side. Side1 orientation. Contains Annotated. For Back Side.
    Image of Attribute. Tool Holder Shown Compressing. Side1 orientation. Contains Annotated.

    For Front Side

    For Back Side

    Tool Holder Shown

    Compressing

    Deburr using your CNC machine without complex programming. These holders grip your deburring tools and extend and retract along the shape of your part to smooth away burs—no overcutting. All you need to do is tell your CNC machine which direction to go. Use them with ball burs.
    To mount these tool holders to your machine, you will need another rotary tool holder or a collet that accepts a 20 mm diameter shank, such as an ER-32 collet. They should not be held by hydraulic chucks or shrink-fit holders. To install your bur, you'll need an ER-11 collet. Use the spanner wrench (sold separately) to tighten the tool holder nut around the collet.
    These tool holders should not be used with cutting fluid; clear any fluid or debris off your workpiece before deburring.
    Fixed Spring Load—Tool holders with a fixed spring load apply a consistent amount of force. They apply force by pushing down (compression) when working on the front of your part and pulling back (tension) when working on the back of your part, so you can deburr both sides with a single holder.
    Adjustable Spring Load—Tool holders with an adjustable spring load have four levels of deburring force. They only apply force by pushing down (compression) on your part, so they can only deburr the front.
    Light Spring Load—A light spring load has a delicate cutting action, applying about the same amount of pressure as your pinky finger. It is ideal for aluminum, plastics, and other soft materials.
    Medium Spring Load—A medium spring load is best for moderate cutting action, applying about as much pressure as your index finger. Use it when deburring steel.
    Heavy Spring Load—A heavy spring load is best for aggressive cutting—it gives about the same force as pressing down with your palm. Use it on stainless steel and other hard materials.
    Holders
    Spanner Wrenches
    Spring
    Load
    Shank
    Bur
    Nut,
    mm
    Force, N
    Rating
    Overall
    Lg., mm
    For Collet Type
    For Collet
    Size, mm
    Dia.,
    mm
    Lg.,
    mm
    For Collet
    Type
    For Collet
    Size
    For
    Shape
    For Max.
    Shank Dia.
    Dia.
    Lg.
    Compression
    Lg., mm
    Extension
    Lg., mm
    Material
    Each
    Each
    Fixed Spring Load—For Front and Back Side
    3Light130 to 150ER-32, ER-40, ER-50, TG-100202040ER-111/4"Ball1/4"16121010Steel8238N1100000008238N15000000
    5Medium130 to 150ER-32, ER-40, ER-50, TG-100202040ER-111/4"Ball1/4"16121010Steel8238N120000008238N1500000
    7Heavy130 to 150ER-32, ER-40, ER-50, TG-100202040ER-111/4"Ball1/4"16121010Steel8238N130000008238N1500000
     
    Adjustable Spring Load—For Front Side
    2.5, 4, 6.5, 8Light, Medium, Heavy145 to 155ER-32, ER-40, ER-50, TG-100202045ER-111/4"Ball1/4"161210—Steel8238N140000008238N1500000
     
    back to top