Filter by
Blade Width
Material
Overall Length
Handle Type
Length
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Performance
Chisels for Metal
Blade Wd. | Overall Lg. | Material | Each | |||
|---|---|---|---|---|---|---|
Standard End with Smooth Handle | ||||||
 | ||||||
Straight Tip | ||||||
| 1/4" | 5" | Steel | 3575A11 | 00000 | ||
| 5/16" | 5" | Steel | 3575A12 | 0000 | ||
| 3/8" | 5" | Steel | 3575A13 | 0000 | ||
| 7/16" | 6" | Steel | 3575A14 | 0000 | ||
| 1/2" | 6" | Steel | 3575A22 | 0000 | ||
| 1/2" | 9" | Steel | 3575A39 | 00000 | ||
| 1/2" | 12" | Steel | 3575A41 | 00000 | ||
| 5/8" | 6 1/2" | Steel | 3575A15 | 0000 | ||
| 5/8" | 12" | Steel | 3575A31 | 00000 | ||
| 3/4" | 7" | Steel | 3575A16 | 00000 | ||
| 3/4" | 12" | Steel | 3575A32 | 00000 | ||
| 3/4" | 18" | Steel | 3575A33 | 00000 | ||
| 7/8" | 7 1/2" | Steel | 3575A17 | 00000 | ||
| 7/8" | 12" | Steel | 3575A34 | 00000 | ||
| 7/8" | 18" | Steel | 3575A35 | 00000 | ||
| 1" | 8" | Steel | 3575A18 | 00000 | ||
| 1" | 12" | Steel | 3575A36 | 00000 | ||
| 1" | 18" | Steel | 3575A37 | 00000 | ||
| 1 1/4" | 12" | Steel | 36085A31 | 0000 | ||
Oversized End with Smooth Handle | ||||||
 | ||||||
Straight Tip | ||||||
| 1/4" | 4 7/8" | Steel | 3566A11 | 0000 | ||
| 5/16" | 5 1/4" | Steel | 3566A12 | 0000 | ||
| 3/8" | 5 5/8" | Steel | 3566A13 | 0000 | ||
| 1/2" | 6 3/8" | Steel | 3566A15 | 0000 | ||
| 5/8" | 6 3/4" | Steel | 3566A16 | 0000 | ||
| 3/4" | 7 1/8" | Steel | 3566A17 | 0000 | ||
| 3/4" | 12" | Steel | 3567A16 | 0000 | ||
| 3/4" | 18" | Steel | 3567A21 | 00000 | ||
| 7/8" | 7 1/2" | Steel | 3566A18 | 0000 | ||
| 1" | 7 7/8" | Steel | 3566A19 | 00000 | ||
| 1" | 12" | Steel | 3567A18 | 00000 | ||
| 1" | 18" | Steel | 3567A23 | 00000 | ||
Oversized End with Knurled Handle | ||||||
 | ||||||
Straight Tip | ||||||
| 3/8" | 6" | Steel | 3271A31 | 00000 | ||
| 1/2" | 6 7/8" | Steel | 3271A32 | 00000 | ||
| 5/8" | 7 5/8" | Steel | 3271A33 | 00000 | ||
| 3/4" | 8 1/2" | Steel | 3271A34 | 00000 | ||
| 7/8" | 9 1/4" | Steel | 3271A35 | 00000 | ||
| 1" | 10 1/8" | Steel | 3271A36 | 00000 | ||
Chisel Sets for Metal
|
Standard End with Smooth Handle |
|
Oversized End with Knurled Handle |
No. of Pieces | Includes | Material | Each | |||
|---|---|---|---|---|---|---|
Standard End with Smooth Handle | ||||||
| 4 | 5" Long Chisel with 1/4" Wide Blade 5" Long Chisel with 5/16" Wide Blade 5 1/2" Long Chisel with 3/8" Wide Blade 6" Long Chisel with 7/16" Wide Blade Vinyl Roll Pouch | Steel | 3575A19 | 000000 | ||
| 4 | 6 1/2" Long Chisel with 5/8" Wide Blade 7" Long Chisel with 3/4" Wide Blade 7 1/2" Long Chisel with 7/8" Wide Blade 8" Long Chisel with 1" Wide Blade | Steel | 3575A21 | 00000 | ||
| 5 | 5" Long Chisel with 1/4" Wide Blade 5 1/2" Long Chisel with 3/8" Wide Blade 6" Long Chisel with 1/2" Wide Blade 7" Long Chisel with 3/4" Wide Blade 8" Long Chisel with 1" Wide Blade Vinyl Roll Pouch | Steel | 3575A38 | 00000 | ||
| 5 | 5 1/2" Long Chisel with 3/8" Wide Blade 6" Long Chisel with 7/16" Wide Blade 6 1/2" Long Chisel with 5/8" Wide Blade 7" Long Chisel with 3/4" Wide Blade 7 1/2" Long Chisel with 7/8" Wide Blade | Steel | 3575A23 | 00000 | ||
Oversized End with Knurled Handle | ||||||
| 5 | 6" Long Chisel with 3/8" Wide Blade 6 7/8" Long Chisel with 1/2" Wide Blade 7 5/8" Long Chisel with 5/8" Wide Blade 8 1/2" Long Chisel with 3/4" Wide Blade 9 1/4" Long Chisel with 7/8" Wide Blade Nylon Roll Pouch | Steel | 3271A41 | 00000 | ||
Slot-Cutting Chisels for Metal
Groove-Cutting Chisels for Metal
Blade Wd. | Overall Lg. | Material | Each | |||
|---|---|---|---|---|---|---|
Standard End with Smooth Handle | ||||||
 | ||||||
Diamond Tip | ||||||
| 1/8" | 5" | Steel | 3570A8 | 000000 | ||
| 3/16" | 5 1/2" | Steel | 3570A9 | 00000 | ||
| 1/4" | 5 3/4" | Steel | 3570A2 | 00000 | ||
| 5/16" | 6" | Steel | 3570A3 | 00000 | ||
| 3/8" | 7" | Steel | 3570A4 | 00000 | ||
| 1/2" | 7" | Steel | 3570A5 | 00000 | ||
 | ||||||
Round Tip | ||||||
| 1/8" | 5 1/2" | Steel | 3568A1 | 00000 | ||
| 3/16" | 5 1/2" | Steel | 3568A2 | 00000 | ||
| 1/4" | 5 1/2" | Steel | 3568A3 | 00000 | ||
| 3/8" | 7" | Steel | 3568A5 | 00000 | ||
| 1/2" | 8" | Steel | 3568A6 | 00000 | ||
Chisels for Masonry
Safety-Grip Chisels for Metal
 |
Hit the chisel instead of your hand—a guard protects your hand from injury. These are also known as cold chisels.
Nonsparking Chisels for Metal
 |
Blade Wd. | Overall Lg. | Material | Each | |||
|---|---|---|---|---|---|---|
Standard End with Smooth Handle | ||||||
Straight Tip | ||||||
| 1/4" | 5 1/4" | Aluminum Bronze | 6458A72 | 000000 | ||
| 7/16" | 5 3/4" | Aluminum Bronze | 6458A81 | 00000 | ||
| 9/16" | 6 1/2" | Aluminum Bronze | 6458A89 | 00000 | ||
| 9/16" | 12" | Aluminum Bronze | 6458A82 | 00000 | ||
| 11/16" | 9 1/8" | Aluminum Bronze | 6458A91 | 00000 | ||
| 3/4" | 6" | Aluminum Bronze | 6458A74 | 00000 | ||
| 3/4" | 9" | Aluminum Bronze | 6458A92 | 00000 | ||
| 13/16" | 8" | Aluminum Bronze | 6458A75 | 00000 | ||
| 7/8" | 9" | Aluminum Bronze | 6458A93 | 00000 | ||
| 7/8" | 12" | Aluminum Bronze | 6458A96 | 00000 | ||
| 1 1/16" | 9 1/4" | Aluminum Bronze | 6458A94 | 00000 | ||
Chisels for Bricks
Safety-Grip Chisels for Masonry
 |
Prevent injury with the plastic guard on these chisels. The blade tip is pointed to break up concrete, cement, cinder block, brick, and veined stone.
Punch and Chisel Sets
 |
Loosen, remove, and mark pins, cut rusted fasteners, and shear sheet metal with one set. Made of steel, these tools hold up to repeated hammer strikes. Pin-loosening punches have a flat tip that drives pins partway out without bending them. Pin-removal punches have a tapered tip that follows through to fully extract pins. Center-marking punches create a starter dimple before drilling. Metal-cutting chisels shear bolts, rivets, and sheet metal.
No. of Pieces | Includes | Material | Container Type | Each | ||
|---|---|---|---|---|---|---|
| 8 | 1/8" (3 mm) Point Dia. Pin Removal Punch (5" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Removal Punch (5 1/2" O'all Lg.) 1/4" (6 mm) Point Dia. Center-Marking Punch (6" O'all Lg.) 1/4" (6 mm) Point Dia. Pin Removal Punch (7" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) | Steel | Pouch | 8664N12 | 000000 | |
| 11 | 1/16" (1.5 mm) Point Dia. Pin Removal Punch (4" O'all Lg.) 3/32" (2 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 3/32" (2 mm) Point Dia. Pin Removal Punch (4 1/2" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Removal Punch (4 3/4" O'all Lg.) 5/32" (4 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 1/4" (6 mm) Point Dia. Fine-Center-Marking Punch (4" O'all Lg.) 5/16" (8 mm) Point Dia. Center-Marking Punch (4 1/2" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (5" O'all Lg.) 5/16" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) | Steel | Pouch | 3504A11 | 00000 | |
| 14 | 3/32" (2 mm) Point Dia. Pin Removal Punch (4 3/4" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Loosening Punch (4 3/4" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Loosening Punch (8" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Removal Punch (5" O'all Lg.) 5/32" (4 mm) Point Dia. Pin Removal Punch (5 1/4" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Removal Punch (5 1/2" O'all Lg.) 1/4" (6 mm) Point Dia. Center-Marking Punch (6" O'all Lg.) 1/4" (6 mm) Point Dia. Pin Removal Punch (7" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) 3/4" Wd. Metal-Cutting Chisel (7" O'all Lg.) | Steel | Pouch | 8664N13 | 00000 | |
| 24 | 3/32" (2 mm) Point Dia. Pin Loosening Punch (4 1/2" O'all Lg.) 3/32" (2 mm) Point Dia. Pin Removal Punch (4 3/4" O'all Lg.) 1/8" (3 mm) Point Dia. Center-Marking Punch (4 1/2" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Loosening Punch (4 3/4" O'all Lg.) 1/8" (3 mm) Point Dia. Pin Removal Punch (5" O'all Lg.) 5/32" (4 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 5/32" (4 mm) Point Dia. Pin Removal Punch (5 1/4" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Loosening Punch (5" O'all Lg.) 3/16" (5 mm) Point Dia. Pin Removal Punch (5 1/2" O'all Lg.) 1/4" (6 mm) Point Dia. Center-Marking Punch (6" O'all Lg.) 1/4" (6 mm) Point Dia. Fine-Center-Marking (6" O'all Lg.) 1/4" (6 mm) Point Dia. Pin Loosening Punch (6" O'all Lg.) 1/4" (6 mm) Point Dia. Pin Removal Punch (7" O'all Lg.) 5/16" (8 mm) Point Dia. Pin Loosening Punch (7" O'all Lg.) 5/16" (8 mm) Point Dia. Pin Removal Punch (7" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) 3/4" Wd. Metal-Cutting Chisel (7" O'all Lg.) 7/8" Wd. Metal-Cutting Chisel (7 1/2" O'all Lg.) 1/4" Wd. Half-Round-Nose Chisel (5 1/2" O'all Lg.) 1/4" Wd. Slot-Cutting Chisel (5 1/2" O'all Lg.) 3/16" Wd. Diamond-Point Chisel (5" O'all Lg.) | Steel | Pouch | 8664N14 | 000000 |
Safety-Grip Chisels for Bricks
 |
Protect your hands from injury with the guard on these chisels. Use them to score, cut, and trim bricks and blocks.
