These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

A large loop handle makes these pins easy to grip.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

Sized to fit snugly around pipe and tube, these pins use spring force to keep the retainer closed.

Spring force holds pieces of telescoping tubing together. Also known as snap buttons and tubing buttons.

For the fastest installation, push these pins into a hole and a spring-loaded wedge pops out to lock them in place. Also known as slic pins.

The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Also known as hitch pin clips and R-clips, these pins are easy to install and remove.

Slide the pin through a hole then snap the ring down to lock these pins in place. Also known as click pins.

For parts that spin or are otherwise difficult to access, slide these pins in and tap them with a hammer for a temporary hold. Reposition work, then bend the prongs outward to secure.

These pins are coiled for more tension than standard wire-snap cotter pins.

Clip these pins onto grooved shafts and clevis pins with retaining ring grooves.

The double-head design lets you push or pull these pins from either side of the hole. Once in place there's little chance they will be vibrated out or knocked off.

Use the key to unlock these pins, then press the button to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.

These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Choose a material, head type, end type, and size to create a custom pin.

Clevis pins have a hole for a cotter pin on one end to lock them in place.

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open.