Give multiple people access to secured items or equipment in washdown areas without requiring keys. A gasket prevents low-pressure washdowns, dust, and dirt from getting into an enclosure through the lock. This helps you maintain an IP65 rating in a sealed enclosure.

Reset the combination any time. Also known as quarter-turn locks, twist the knob to rotate the cam 90° to lock and unlock the door. They come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Secure these locks with a three-number combination or a key. You can set a combination and reset it at any time. They’re keyed alike, so they’re useful if you need several locks that all open with the same key. Often used on sealed server cabinets and electrical panels, they have a gasket that keeps low-pressure washdowns and dust from getting through the lock. This helps you maintain an IP65 rating on sealed enclosures. Lift the handle and it swings smoothly to latch and unlatch doors. Also known as quarter-turn locks, they have a cam that rotates 90° as you swing the handle. When locked, the handle lies flat, so it won’t snag anything passing by. It also can’t be raised and turned, adding an additional layer of security.

These locks come with a straight and offset cam. Offset cams are reversible, so they can be mounted at two different latching distances.

For technical drawings and 3-D models, click on a part number.

For security, choose a combination from over 2,000 possible five-number combinations. Mount these locking bars on the front of nonlocking cabinets to secure the contents. The bar slides over a notched pin at the bottom, fits into a notched or clevis pin at the top, and locks at the top. For access to cabinet drawers, remove the bar.

For technical drawings and 3-D models, click on a part number.

Designed to comply with the 2010 ADA Standards for Accessible Design, these locks open with an extra-wide key that’s easy to grip, even while wearing gloves. You can also open them by turning the knob, like you would with a typical locker lock. Preset combinations are included in the instruction packet. All locks come with two extra-wide keys.

Choose your lock based on the direction your locker door swings. If the hinges are on the right as you face the locker, select a right lock; if they’re on the left, select a left lock.

Control keys (sold separately) open all locks and are required to change the combination. You can switch between five preset three-number combinations by inserting the control key and pressing the push-button on the back.

For technical drawings and 3-D models, click on a part number.

Close the locker door and turn the dial to lock. For security, change the combination in seconds. The back of each lock has a push-button combination changer that allows switching between five three-number combinations. A control key (sold separately) overrides the combination.

All of these locks are factory registered with an exclusive keying system that is unique to your locks. They have concealed mounting bolts to prevent tampering. To determine door swing direction, stand facing the locker. If the hinges are on the right, select a right lock; if they're on the left, select a left lock. Note: When ordering a new system, order a control key (sold separately). When matching an existing group of locks, please specify key number.

For technical drawings and 3-D models, click on a part number.

These locks automatically lock when the locker door is closed. For security, change the combination in seconds. The back of each lock has a push-button combination changer that allows switching between five three-number combinations. A control key (sold separately) overrides the combination.

All of these locks are factory registered with an exclusive keying system that is unique to your locks. They have concealed mounting bolts to prevent tampering. To determine door swing direction, stand facing the locker. If the hinges are on the right, select a right lock; if they're on the left, select a left lock. Note: When ordering a new system, order a control key (sold separately). When matching an existing group of locks, please specify key number.

For technical drawings and 3-D models, click on a part number.