Combination Wrench Sets

Filter by

Sold As

Wrench Style

System of Measurement

Wrench Opening Shape

Head Style

Drive Size

Number of Pieces

Ratcheting

Finish

Overall Length

Container Type

Plastic Roll-Up Pouch

Drive Style

Grade

Relative Length

Material

Appearance

Performance

Reversible Ratcheting

For Use With

Length

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Opening Angle

15°

Jaw Type

Fixed

Turn Required to Ratchet

59 Products


Fabric Pouch	Fabric Roll-Up Pouch

Plastic Organizer	Plastic Roll-Up Pouch


12-Point Opening	6-Point Opening

With a range of drive sizes and lengths, these wrench sets are your go-to for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque.

6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.

12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.

Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.

Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.

Corrosion-Resistant Wear-Resistant 420 Stainless Steel—The most corrosion-resistant wrenches we offer. Stronger than other types of stainless steel, they'll withstand years of use without breaking or warping.

	Box-End Head Offset Angle	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Industrial







	6-Point Opening

	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/4" to 11"	15°	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	0000000	0000000


	8	5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	5 3/8" to 11"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	00000000	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/4" to 14"	15°	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	0000000	000000
	11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 3/16" to 11 1/16"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000




			12-Point Opening

			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6" to 10 1/8"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	000000	000000


			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6" to 10 1/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	00000
			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Dull	Black-Oxide Steel	Plastic Roll-Up Pouch	—	0000000	000000
			9	1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 9 3/16"	15°	15°	—	420 Stainless Steel	—	—	000000000	000000
			11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6" to 13 1/2"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	000000	000000
			11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6" to 13 1/2"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000
			11	6 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm	3 3/4" to 9 3/16"	15°	15°	—	420 Stainless Steel	—	DIN 3113	000000000	000000
			11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/4" to 10 1/8"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000
			11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/4" to 10 1/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000
			14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6" to 17"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	000000	000000
			14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6" to 17"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000


			15	5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	5 3/4" to 17 1/4"	15°	15°	Dull	Black-Oxide Steel	Plastic Roll-Up Pouch	—	0000000	000000
			15	7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 27 mm, 30 mm, 32 mm	5 3/8" to 17"	15°	15°	Polished	Chrome-Plated Steel	Fabric Pouch	—	0000000	000000
			17	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm	5" to 11 3/4"	15°	15°	Dull	Chrome-Plated Steel	Fabric Pouch	—	0000000	000000
			18	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm	5 1/4" to 12 3/4"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	ASME B107.100	0000000	000000


			Value







							12-Point Opening

							6	1/4", 3/8", 7/16", 1/2", 9/16", 5/8"	5 1/2" to 8 11/16"	15°	15°	Polished	Steel	Plastic Organizer	—	000000	00000


							6	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm	5 1/2" to 8 11/16"	15°	15°	Polished	Steel	Plastic Organizer	—	000000	00000
							11	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"	4 7/16" to 11 5/8"	15°	15°	Polished	Chrome-Plated Steel	Plastic Organizer	—	000000	00000
							11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/8" to 9 7/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	000000	00000
							14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	4 5/16" to 10 1/2"	15°	15°	Dull	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	000000	00000
							14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 19/32" to 8 41/64"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	000000	00000
							22	1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	4" to 10 7/32"	15°	15°	Dull	Chrome-Plated Steel	Plastic Organizer	—	0000000	00000

Reversible Ratcheting Combination Wrench Sets


Fabric Roll-Up Pouch	Plastic Roll-Up Pouch	Plastic Tray

12-Point

Opening

With the flick of a lever, the wrenches in these sets go from loosening nuts and bolts to tightening them. Unlike other ratcheting wrenches, you can turn in either direction without having to flip them over. They're ideal for jobs with frequent pivots between tightening and loosening, such as assembly line maintenance.

Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

				Box End
	No. of Pieces	Drive Size	Overall Lg.	Head Offset Angle	Number of Teeth	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Industrial







				12-Point Opening

				7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	7 1/16" to 12"	15°	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	0000000


				10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	7 1/16" to 12"	15°	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000


				Value







								12-Point Opening

								4	13/16", 7/8", 15/16", 1"	10 1/2" to 13"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Tray	ASME B107.100	00000000	000000


								4	21 mm, 22 mm, 24 mm, 25 mm	5 1/4" to 9 3/4"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	ASME B107.100	00000000	000000
								7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/4" to 9 5/8"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	0000000	000000
								8	8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/2" to 9 5/8"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Tray	ASME B107.100	0000000	000000

Flex-Head Ratcheting Combination Wrench Sets

12-Point

Opening

Access a range of hard-to-reach fasteners without needing to remove obstructions. These wrenches are particularly useful where components are packed tightly, such as HVAC systems and conveyors. The box end swivels a full 180° to pivot around obstacles and give you leverage even at awkward angles. To switch between loosening and tightening, flip these wrenches over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

				Box End
	No. of Pieces	Drive Size	Overall Lg.	Flex Range of Motion	Number of Teeth	Open-End Opening Angle	Appearance	Material		Each
12-Point Opening



		10	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	5 1/2" to 9 3/4"	180°	90	15°	Polished	Chrome-Plated Steel	0000000	0000000


		12	8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	5 1/2" to 9 5/16"	180°	90	15°	Polished	Chrome-Plated Steel	0000000	000000

Ratcheting Combination Wrench Sets


		12-Point Opening

Turn a variety of nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. Just flip them over when you need to switch between tightening and loosening.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	Drive Size	Overall Lg.	No. of Teeth	Open-End Opening Angle	Appearance	Material	Container Type		Each
12-Point Opening



	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	7 1/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	0000000	0000000


	10	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	4 15/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	0000000	000000
	10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	7 1/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	0000000	000000

Spline Ratcheting Combination Wrench Sets

Spline Opening

These versatile wrenches turn a range of hex, 12-point, and spline fasteners. With more points of contact than 12-point openings, the spline-shaped box end gets a better grip on nuts and bolts and is less likely to round off corners. Rotate these wrenches without having to remove and reposition them. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End
	No. of Pieces	Drive Size	External Spline Drive Size	Number of Teeth	Overall Lg.	Open-End Opening Angle	Appearance	Material	Container Type		Each
Spline Opening



		11	1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	No. 8, No. 9, No. 10, No. 11, No. 12, No. 14, No. 16, No. 18, No. 20, No. 22, No. 24	72	5 1/8" to 11"	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	0000000	0000000


		14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12, No. 13, No. 14, No. 15, No. 16, No. 17, No. 18, No. 19	72	4 15/16" to 11 1/16"	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	0000000	000000

Stubby Reversible Ratcheting Combination Wrench Sets

12-Point

Opening

The ultimate tool for ratcheting in tight spaces—in an array of sizes. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End
	Drive Size	Overall Lg.	Head Offset Angle	Number of Teeth	Open-End Opening Angle	Appearance		Each
12-Point Opening







				Chrome-Plated Steel

				5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 1/2" to 5 1/2"	15°	60	15°	Polished	000000	0000000


				8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/2" to 5 1/2"	15°	60	15°	Polished	0000000	000000

Stubby Combination Wrench Sets


Fabric Roll-Up Pouch	Plastic Roll-Up Pouch


		12-Point Opening

Turn nuts and bolts in tight spaces with the wrenches in these sets. They are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	Box-End Head Offset Angle	Open-End Opening Angle	Appearance	Container Type	Specs. Met		Each
12-Point Opening







	Chrome-Plated Steel

	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 5 7/16"	15°	15°	Polished	Fabric Roll-Up Pouch	—	0000000	0000000


	7	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm	3 3/8" to 4 5/16"	15°	15°	Polished	Fabric Roll-Up Pouch	—	0000000	000000
	11	1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 1/4" to 5 1/2"	15°	15°	Polished	Plastic Roll-Up Pouch	—	0000000	000000
	14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/4" to 5 1/2"	15°	15°	Polished	Plastic Roll-Up Pouch	ASME B107.100	00000000	000000

Stubby Ratcheting Combination Wrench Sets


	Fabric Roll-Up Pouch


	12-Point Opening

Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.

Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	No. of Teeth	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Industrial







	12-Point Opening

	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 7/8" to 5 3/8"	72	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	0000000


	10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/2" to 5 3/8"	72	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	0000000	000000


	Value







					12-Point Opening

					7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 5 1/2"	72	15°	Polished	Chrome-Plated Steel	—	—	0000000	000000


					10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 3/4" to 5 1/2"	72	15°	Polished	Chrome-Plated Steel	—	ASME B107.100	0000000	000000

Socket Wrench Sets

Image of Attribute. Front orientation. Contains Annotated, Border.

These wrenches have one pivoting socket end and one open end.

			Socket End
No. of Pieces	Drive Size	Opening Shape	Head Style	Flex Range of Motion	Open End Opening Angle	Material	Appearance	Container Type		Each
4	7/16", 1/2", 9/16", 5/8"	12-Point and Round Openings	Flex	180°	15°	Chrome-Plated Steel	Dull	Fabric Roll-Up Pouch	0000000	0000000
7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	12-Point and Round Openings	Flex	180°	15°	Chrome-Plated Steel	Dull	Fabric Roll-Up Pouch	0000000	000000

Nonsparking Combination Wrench Sets

12-Point

Opening

Made of aluminum bronze that is FM approved, these wrench sets won't create sparks even when scraped, struck, or dropped. They help you meet OSHA requirements when turning nuts and bolts in hazardous environments with flammable vapors, liquids, or dust. Use them everywhere from oil refineries to chemicals plants.

Warning: Do not use these tools in direct contact with acetylene.

	Drive Size	Overall Lg.	Box-End Head Offset Angle	Open-End Opening Angle	Material	Container Type	Certification		Each
12-Point Opening



	6	7/16", 1/2", 9/16", 5/8", 3/4", 1 1/8"	6 7/8" to 15 3/8"	15°	15°	Aluminum Bronze	Fabric Roll-Up Pouch	FM Approved	0000000	0000000


	7	3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8"	6 1/4" to 11 5/8"	15°	15°	Aluminum Bronze	Fabric Roll-Up Pouch	FM Approved	0000000	000000

High-Visibility Combination Wrench Sets


Plastic Roll-Up Pouch Red	Plastic Roll-Up Pouch Yellow

12-Point

Opening

These eye-catching wrenches stand out in tool kit clutter and under faint lighting on construction sites. Powder coated in bright red or yellow, these wrenches are easy to spot when you need them in a pinch.

	Drive Size	Overall Lg.	Box-End Head Offset Angle	Open-End Opening Angle	Material	Container Type	Color		Each
12-Point Opening



	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	0000000	0000000


	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	0000000	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/2" to 14"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	0000000	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/2" to 14"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	0000000	000000
	14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6 1/2" to 17"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	0000000	000000
	14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6 1/2" to 17"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	0000000	000000