About Torque Tools
More
Tight-Clearance Ratcheting Bit Screwdrivers
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Style E have seven interchangeable bits—all of which are compatible with power tools. Store them inside the handle so they don’t get lost or misplaced when you’re not using them. Bits are held in place by magnets. To use these screwdrivers as a nutdriver, remove the bit and turn fasteners with the shaft.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Bit Hex Shank Size | Number of Sizes | Sizes Included  | Overall Lg. | Bit-Holding Mechanism | Bit | Handle | Features | Each | |
| E | 1/4" | 8 | External Hex: 1/4" Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" Square: No. 1, No. 2 Torx: T15 | 4 5/8" | Magnet | Steel | Plastic | Bit storage inside tool | 00000000 | 000000 |
Stubby Reversible-Bit Screwdriver/Nutdrivers
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.
Shaft | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bit Hex Shank Size | Number of Sizes | Sizes Included | Overall Lg. | Lg. | O'all Wd. | Bit-Holding Mechanism | Shaft | Bit | Handle | Features | Each | |
| 1/4", 5/16" | 6 | Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" External Hex: 1/4", 5/16" | 3 3/8" | 1 1/4" | 17/32" | Ball Detent | Chrome-Plated Steel | Steel | Plastic | Bit storage inside shaft | 0000000 | 000000 |
Compact Changeable-Shaft Ball-End Screwdriver Sets
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size. Sets include one handle, one extension, and multiple shafts.
| No. of Pieces | Components Included | Sizes Included | Drive Size | Extensions Included | O'all Lg. | Max. Access Angle | Material | Finish | Handle Material | Container Type | Each | |
| 9 | 7 Shafts 1 Extension 1 Screwdriver Handle | Hex: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm | 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm | 4" Lg. Extension | 7 1/2" | 20° | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 000000 |
| 11 | 9 Shafts 1 Extension 1 Screwdriver Handle | Hex: 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 4" Lg. Extension | 7 1/2" | 20° | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 000000 |
Compact Changeable-Shaft Screwdriver Sets
A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size. Sets include one handle, one extension, and multiple shafts.
Ball-end shafts allow angled entry to turn screws in hard-to-reach areas when you don't have exact alignment between the fastener and the tool.
| Number of Pieces | Components Included | Sizes Included | Extensions Included | Overall Lg. | Material | Finish | Handle Material | Container Type | Drive Size | Each | |
| 9 | 7 Shafts 1 Extension 1 Screwdriver Handle | Hex: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm | 4" Lg. Extension | 7 1/2" | Steel | Black Oxide | Plastic | Plastic Case | 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm | 0000000 | 000000 |
| 11 | 9 Shafts 1 Extension 1 Screwdriver Handle | Hex: 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 4" Lg. Extension | 7 1/2" | Steel | Black Oxide | Plastic | Plastic Case | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" | 0000000 | 00000 |
Compact Screwdriver Sets
A scaled-down version of standard screwdrivers, these tools are shorter, slimmer, and easy to take with you. Sets include a secondary handle that slips over the attached handle for greater torque and a more comfortable grip.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 9 | No. 0 Phillips Screwdriver—3 1/2" O'all Lg. No. 1 Phillips Screwdriver—3 1/2" O'all Lg. No. 2 Phillips Screwdriver—3 1/2" O'all Lg. 3/32" Slotted Screwdriver—3 1/2" O'all Lg. 1/8" Slotted Screwdriver—3 1/2" O'all Lg. 5/32" Slotted Screwdriver—3 1/2" O'all Lg. 3/16" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Steel | Zinc Plated | Plastic | Plastic Case | 0000000 | 000000 |
| 9 | 0.028" Hex Screwdriver—3 1/2" O'all Lg. 0.035" Hex Screwdriver—3 1/2" O'all Lg. 0.050" Hex Screwdriver—3 1/2" O'all Lg. 1/16" Hex Screwdriver—3 1/2" O'all Lg. 5/64" Hex Screwdriver—3 1/2" O'all Lg. 3/32" Hex Screwdriver—3 1/2" O'all Lg. 7/64" Hex Screwdriver—3 1/2" O'all Lg. 1/8" Hex Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 00000 |
| 9 | 0.89 mm Hex Screwdriver—3 1/2" O'all Lg. 1.27 mm Hex Screwdriver—3 1/2" O'all Lg. 1.5 mm Hex Screwdriver—3 1/2" O'all Lg. 2 mm Hex Screwdriver—3 1/2" O'all Lg. 2.5 mm Hex Screwdriver—3 1/2" O'all Lg. 3 mm Hex Screwdriver—3 1/2" O'all Lg. 4 mm Hex Screwdriver—3 1/2" O'all Lg. 5 mm Hex Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Steel | Black Oxide | Plastic | Plastic Case | 0000000 | 00000 |
Stubby Screwdrivers
When working in tight spaces, these short drivers fit where others can't.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||
|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Each | |
Phillips | |||||||
| No. 1 | 3 1/2" | 1 1/2" | 3/16" | Black-Oxide Steel | Plastic | 0000000 | 00000 |
| No. 2 | 3 1/2" | 1 1/2" | 1/4" | Black-Oxide Steel | Plastic | 0000000 | 0000 |
Slotted | |||||||
| 3/16" | 3 1/2" | 1 1/2" | 3/16" | Black-Oxide Steel | Plastic | 0000000 | 0000 |
| 1/4" | 3 1/2" | 1 1/2" | 7/16" | Black-Oxide Steel | Plastic | 0000000 | 0000 |
Cushion-Grip Stubby Screwdrivers
When working in tight spaces, these short drivers fit where others can't. They have a cushioned grip over a plastic core for comfort and some slip resistance.
For technical drawings and 3-D models, click on a part number.
Ultra-Grip Stubby Screwdrivers
When working in tight spaces, these short drivers fit where others can't. They have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
JIS (Japanese Industrial Standard) drivers are designed for the fasteners used in electronics assembly. The tip has slightly sharper corners than Phillips style.
Shaft | |||||||
|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Each | |
Phillips | |||||||
| No. 1 | 3" | 1" | 3/16" | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Slotted | |||||||
| 7/32" | 3 1/4" | 1" | 3/16" | Chrome-Plated Steel | Plastic | 0000000 | 00000 |
| 1/4" | 3 7/8" | 1" | 1/4" | Chrome-Plated Steel | Plastic | 0000000 | 00000 |
JIS | |||||||
| No. 1 | 3" | 1" | 1/4" | Chrome-Plated Steel | Plastic | 00000000 | 00000 |
| No. 2 | 3" | 1" | 1/4" | Chrome-Plated Steel | Plastic | 00000000 | 00000 |
Compact Nutdriver Sets
A scaled-down version of standard nutdrivers, these tools are shorter, slimmer, and easy to take with you. Sets include a secondary handle that slips over the attached handle for greater torque and a more comfortable grip. Drivers are color-coded by size.
| Number of Pieces | Includes | Overall Lg. with Secondary Handle | Bolt Clearance | Material | Handle Material | Container Type | Each | |
External Hex | ||||||||
|---|---|---|---|---|---|---|---|---|
| 11 | 3/32" Blue Nutdriver—3 1/2" O'all Lg. 1/8" Red Nutdriver—3 1/2" O'all Lg. 5/32" Yellow Nutdriver—3 1/2" O'all Lg. 3/16" Black Nutdriver—3 1/2" O'all Lg. 7/32" Brown Nutdriver—3 1/2" O'all Lg. 1/4" Red Nutdriver—3 1/2" O'all Lg. 9/32" Orange Nutdriver—3 1/2" O'all Lg. 5/16" Yellow Nutdriver—3 1/2" O'all Lg. 11/32" Green Nutdriver—3 1/2" O'all Lg. 3/8" Blue Nutdriver—3 1/2" O'all Lg. Secondary Nutdriver Handle | 5 1/8" | 7/16"-3/4" | Zinc-Plated Steel | Plastic | Plastic Case | 0000000 | 000000 |
Stubby Nutdrivers
When working in tight spaces, these short drivers fit where others can't. They are color-coded by size.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Handle Color | Overall Lg. | Bolt Clearance | Lg. | O'all Wd. | Material | Handle Material | Each | |
External Hex | |||||||||
| 5/16" | Yellow | 3 1/2" | 1 1/4" | 1 1/4" | 1/2" | Chrome-Plated Steel | Plastic | 0000000 | 00000 |
Stubby T-Handle Keys
When working in tight spaces, these short keys fit where others can't. They have a plastic-covered handle for a comfortable grip.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||
|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | Overall Wd. | Material | Handle Material | Each | |
Hex | |||||||
| 3/32" | 4 1/8" | 2" | 3/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 00000 |
| 7/64" | 4 1/8" | 2" | 1/8" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 1/8" | 4 1/8" | 2" | 1/8" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 9/64" | 4 1/8" | 2" | 1/8" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 5/32" | 4 1/8" | 2" | 5/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 3/16" | 4 1/8" | 2" | 3/16" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 7/32" | 4 1/8" | 2" | 7/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 1/4" | 4 1/8" | 2" | 1/4" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 5/16" | 4 1/8" | 2" | 5/16" | Black Phosphate-Coated Steel | Plastic | 0000000 | 00000 |
| 3/8" | 4 1/8" | 2" | 3/8" | Black Phosphate-Coated Steel | Plastic | 0000000 | 00000 |
| 2 mm | 4 1/8" | 2" | 3/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 2.5 mm | 4 1/8" | 2" | 3/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 3 mm | 4 1/8" | 2" | 1/8" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 4 mm | 4 1/8" | 2" | 5/32" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 5 mm | 4 1/8" | 2" | 3/16" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
| 6 mm | 4 1/8" | 2" | 1/4" | Black Phosphate-Coated Steel | Plastic | 0000000 | 0000 |
Stubby T-Handle Key Sets
Sets include an assortment of short keys that fit in tight spaces where others can't. They have a plastic-covered handle for a comfortable grip.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Handle Material | Container Type | Each | |
| 6 | 2 mm Hex T-Handle Key (4 1/8" O'all Lg.) 2.5 mm Hex T-Handle Key (4 1/8" O'all Lg.) 3 mm Hex T-Handle Key (4 1/8" O'all Lg.) 4 mm Hex T-Handle Key (4 1/8" O'all Lg.) 5 mm Hex T-Handle Key (4 1/8" O'all Lg.) 6 mm Hex T-Handle Key (4 1/8" O'all Lg.) | Black Phosphate-Coated Steel | Plastic | Plastic Pouch | 0000000 | 000000 |
| 10 | 3/32" Hex T-Handle Key (4 1/8" O'all Lg.) 7/64" Hex T-Handle Key (4 1/8" O'all Lg.) 1/8" Hex T-Handle Key (4 1/8" O'all Lg.) 9/64" Hex T-Handle Key (4 1/8" O'all Lg.) 5/32" Hex T-Handle Key (4 1/8" O'all Lg.) 3/16" Hex T-Handle Key (4 1/8" O'all Lg.) 7/32" Hex T-Handle Key (4 1/8" O'all Lg.) 1/4" Hex T-Handle Key (4 1/8" O'all Lg.) 5/16" Hex T-Handle Key (4 1/8" O'all Lg.) 3/8" Hex T-Handle Key (4 1/8" O'all Lg.) | Black Phosphate-Coated Steel | Plastic | Plastic Stand | 0000000 | 00000 |
Stubby Factory-Set Torque Screwdrivers
When working in tight spaces, these short drivers fit where others can't. They are factory set to reach the same torque every time and cannot be adjusted. Drivers slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening. They come in a variety of colors for quick identification. Drivers include a calibration certificate traceable to NIST that states the product has passed a test for accuracy. Use with screwdriver bits (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Torque Setting | Torque Setting Increment | Sleeve Color | For Bit Hex Shank Size | Clockwise Accuracy | Torque-Limiting Direction | Certification | Overall Lg. | Shaft | Handle | Each | |
| 80-800 in.-oz. | 1 in.-oz. | Blue | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 0000000 |
| 80-800 in.-oz. | 1 in.-oz. | Red | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Torque Setting | Torque Setting Increment | Sleeve Color | For Bit Hex Shank Size | Clockwise Accuracy | Torque-Limiting Direction | Certification | Overall Lg. | Shaft | Handle | Each | |
| 5-50 in.-lbs. | 0.1 in.-lbs. | Blue | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 0000000 |
| 5-50 in.-lbs. | 0.1 in.-lbs. | Gold | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
| 5-50 in.-lbs. | 0.1 in.-lbs. | Green | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
| 5-50 in.-lbs. | 0.1 in.-lbs. | Red | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Torque Setting | Torque Setting Increment | Sleeve Color | For Bit Hex Shank Size | Clockwise Accuracy | Torque-Limiting Direction | Certification | Overall Lg. | Shaft | Handle | Each | |
| 0.6-5.6 Nm | 0.1 Nm | Blue | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 0000000 |
| 0.6-5.6 Nm | 0.1 Nm | Gold | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
| 0.6-5.6 Nm | 0.1 Nm | Green | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |
| 0.6-5.6 Nm | 0.1 Nm | Red | 1/4" | ±6% | Clockwise | Calibration Certificate Traceable to NIST | 2" | Stainless Steel | Aluminum | 00000000 | 000000 |