With a polyurethane bowl and housing, these dryers resist synthetic compressor lubricants, solvents, acids, and other chemicals in your compressed air line. They have a clear bowl so you can monitor contents and the desiccant, which changes color when it needs to be replaced. These dryers use clay desiccant to remove moisture, oil, and particles—no need for a separate filter and dryer. Place them down the line from aftercoolers and separators, which remove most of the water first.

NPT female dryers make replacing desiccant easy—simply remove the bowl. When you replace the desiccant, service or replace the filter element to extend its life.

NPT male dryers are installed inline. To replace the desiccant, remove the entire unit from the line.

For an uninterrupted supply of clean, dry compressed air, these dryers have two desiccant towers. While desiccant in one tower absorbs moisture, the desiccant in the other is drying out, then they switch automatically. In addition to water, they also remove compressor oil and particles to extend their life and the components downstream from them. Install them after separators and aftercoolers, which remove the bulk of the moisture.

Style A are compact and quiet, making them ideal for point-of-use drying on shop floors. A display shows real-time drying data and alerts you for maintenance.

Style B have multiple inlets and outlets for mounting versatility—install them horizontally or vertically. They’re often used in industrial automation and manufacturing. Replacement filter elements help remove oil and particles and extend equipment life. Replacement service kits include desiccant cartridges, O-rings, and washers.

Style C stand up to tough outdoor and harsh conditions. Install them inline along your air line for a straight-through connection. Replacement service kits include filters, check valves, and purge valves.

Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done. They have a clear bowl so you can see inside to monitor the desiccant. When the desiccant becomes saturated, it changes color to indicate that the dryer should be changed.

Remove water and compressor oil from your air line to prevent damage to air-powered tools and equipment. The dryer and filter share the same cartridge to save space and reduce downtime when changing them. Install them after separators and aftercoolers to remove the bulk of the moisture, and after a particle filter to protect the desiccant.

Dryers with an opaque bowl have a twist-on design for fast, clean, tool-free maintenance.

Dryers with a clear bowl are visible from all angles. They have silica gel desiccant that changes from blue to pink, making it easy to know when to replace the cartridge. Disassembly is required to access the desiccant.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal. Because they are non-cycling and run continuously, they are best for applications that need constant dry air. A float-operated drain valve opens automatically when the bowl begins to fill. After water removal, a heat exchanger raises the outlet air temperature to prevent condensation on downstream piping. The built-in display lets you monitor and adjust the dew point of the compressed air. Be sure to install in your air line after the compressor and separator.