Norgren Compressed Air Filter/Regulators

Filter by

Inlet Pipe Size

Maximum Pressure Regulation

Gauge Included

Outlet Pipe Size

Outlet Thread Type

For Removing

Pressure Adjustment

Pipe Size

Bowl Type

Opaque with Sight Glass

Drain Type

Inlet Thread Type

Bowl Material

Manufacturer

Component Configuration

Maximum Pressure

Maximum Flow Rate @ Pressure

Manufacturer Series

Removes Particle Size Down To

Housing Material

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Series Number

Inlet Connection

Threaded

Forward

How can we improve?

110 Products

About Air Preparation

Customize your air preparation system with dryers, filters, and other purifying parts.

Norgren Modular Compressed Air Filter/Regulators for Particle Removal

Series No. 82 and
Series No. 84 Bowl
Removal Clearance

Series No. 73 and
Series No. 74 Bowl
Removal Clearance

Clear Bowl
with Guard and
Padlockable Knob

Clear Bowl with Guard

Opaque Bowl with Sight Glass

A filter and regulator stacked top-to-bottom, these filter/regulators supply clean, compressed air at the pressure you need. They connect to other Norgren units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Extend filter life by choosing the coarsest (highest micron) filtration that still meets your air quality needs. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Series no. 82 and 84 require very little clearance for replacing the filter element or emptying condensate. When you remove the bowl, the filter element comes with it. Slip a padlock through a hole in the regulating knob to prevent unwanted pressure changes.

Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner clamps (sold separately) create compact, airtight connections between components. They come with mounting brackets to attach these filter/regulators to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

Series No. 82—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size							Overall					Replacement Filter Elements		Replacement Filter Bowls		End Block Sets
Mfr. Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Ht.	Wd.	Features		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Polypropylene Plastic Guard and Automatic Drain
B82G	1/4	1/4	55 scfm @ 100 psi	4-145	145	140°	5	9 3/8"	1 3/4"	Padlockable Knob	9289N11	000000	4958K711	000000	2975N111	000000	7390K316	000000
B82G	1/4	1/4	55 scfm @ 100 psi	4-145	145	140°	40	9 3/8"	1 3/4"	Padlockable Knob	9289N12	00000	4958K712	00000	2975N111	00000	7390K316	00000
B82G	3/8	3/8	55 scfm @ 100 psi	4-145	145	140°	5	9 3/8"	1 3/4"	Padlockable Knob	9289N13	00000	4958K711	00000	2975N111	00000	7390K317	00000
B82G	3/8	3/8	55 scfm @ 100 psi	4-145	145	140°	40	9 3/8"	1 3/4"	Padlockable Knob	9289N14	00000	4958K712	00000	2975N111	00000	7390K317	00000
Polycarbonate Plastic Bowl—Clear with Polypropylene Plastic Guard and Manual Drain
B82G	1/4	1/4	55 scfm @ 100 psi	4-145	145	140°	5	9 3/8"	1 3/4"	Padlockable Knob	9289N15	00000	4958K711	00000	2975N112	00000	7390K316	00000
B82G	3/8	3/8	55 scfm @ 100 psi	4-145	145	140°	5	9 3/8"	1 3/4"	Padlockable Knob	9289N16	00000	4958K711	00000	2975N112	00000	7390K317	00000

Replacement Pressure Gauge	8389N125	Each	000000
Replacement Automatic Drain	7390K967	Each	00000
Joiner Clamp	7390K612	Each	00000
Mounting Bracket	7390K968	Each	00000
Replacement Seal Kit	3058N111	Each	00000

Series No. 84—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size							Overall					Replacement Filter Elements		Replacement Filter Bowls		End Block Sets
Mfr. Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Ht.	Wd.	Features		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Polypropylene Plastic Guard and Automatic Drain
B84G	3/8	3/8	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N17	0000000	4958K713	000000	2975N114	000000	7390K318	000000
B84G	3/8	3/8	146 scfm @ 100 psi	4-145	145	140°	40	11 7/8"	2 3/4"	Padlockable Knob	9289N18	000000	4958K714	00000	2975N114	00000	7390K318	00000
B84G	1/2	1/2	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N19	000000	4958K713	00000	2975N114	00000	7390K319	00000
B84G	1/2	1/2	146 scfm @ 100 psi	4-145	145	140°	40	11 7/8"	2 3/4"	Padlockable Knob	9289N21	000000	4958K714	00000	2975N114	00000	7390K319	00000
B84G	3/4	3/4	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N22	000000	4958K713	00000	2975N114	00000	7390K321	00000
B84G	3/4	3/4	146 scfm @ 100 psi	4-145	145	140°	40	11 7/8"	2 3/4"	Padlockable Knob	9289N23	000000	4958K714	00000	2975N114	00000	7390K321	00000
Polycarbonate Plastic Bowl—Clear with Polypropylene Plastic Guard and Manual Drain
B84G	3/8	3/8	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N24	000000	4958K713	00000	2975N115	00000	7390K318	00000
B84G	1/2	1/2	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N25	000000	4958K713	00000	2975N115	00000	7390K319	00000
B84G	3/4	3/4	146 scfm @ 100 psi	4-145	145	140°	5	11 7/8"	2 3/4"	Padlockable Knob	9289N26	000000	4958K713	00000	2975N115	00000	7390K321	00000

Replacement Pressure Gauge	8389N126	Each	000000
Replacement Automatic Drain	7390K967	Each	00000
Mounting Bracket	4285K114	Each	00000
Replacement Seal Kit	3058N112	Each	00000
Joiner Clamp	7390K614	Each	00000

Series No. 73—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size							Overall				Replacement Filter Elements		Replacement Filter Bowls		End Block Sets
Mfr. Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Ht.	Wd.		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Steel Guard and Automatic Drain
B73G	1/4	1/4	60 scfm @ 100 psi	5-150	150	125°	5	9 5/8"	2 3/4"	9891K21	0000000	4958K82	000000	2975N19	0000000	7390K31	000000
B73G	3/8	3/8	42 scfm @ 100 psi	5-150	150	125°	5	9 5/8"	2 3/4"	9891K22	000000	4958K82	00000	2975N19	000000	7390K32	00000
B73G	1/2	1/2	66 scfm @ 100 psi	5-150	150	125°	5	9 5/8"	2 3/4"	9891K23	000000	4958K82	00000	2975N19	000000	7390K33	00000
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain
B73G	1/4	1/4	73 scfm @ 100 psi	5-150	250	175°	5	9 5/8"	2 3/4"	9289N27	000000	4958K82	00000	2975N16	00000	7390K31	00000
B73G	3/8	3/8	73 scfm @ 100 psi	5-150	250	175°	5	9 5/8"	2 3/4"	9289N28	000000	4958K82	00000	2975N16	00000	7390K32	00000
B73G	1/2	1/2	73 scfm @ 100 psi	5-150	250	175°	5	9 5/8"	2 3/4"	4910K23	000000	4958K82	00000	2975N16	00000	7390K33	00000

Replacement Pressure Gauge	7390K711	Each	000000
Replacement Automatic Drain	4910K31	Each	00000
Service Kit	4910K36	Each	00000
Mounting Bracket	5001K13	Each	00000
Joiner Clamp	7390K2	Each	00000

Series No. 74—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size							Overall				Replacement Filter Elements		Replacement Filter Bowls		End Block Sets
Mfr. Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Ht.	Wd.		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Steel Guard and Automatic Drain
B74G	3/8	3/8	95 scfm @ 100 psi	5-150	150	125°	5	11 3/8"	3 1/4"	7390K27	0000000	4958K95	000000	2975N14	0000000	7390K32	000000
B74G	1/2	1/2	120 scfm @ 100 psi	5-150	150	125°	5	11 3/8"	3 1/4"	7390K57	000000	4958K95	00000	2975N14	000000	7390K33	00000
B74G	3/4	3/4	150 scfm @ 100 psi	5-150	150	125°	5	11 3/8"	3 1/4"	9891K42	000000	4958K95	00000	2975N14	000000	7390K34	00000
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain
B74G	3/8	3/8	85 scfm @ 100 psi	5-150	250	175°	5	11 3/8"	3 1/8"	4910K13	000000	4958K95	00000	2975N18	000000	7390K32	00000
B74G	1/2	1/2	140 scfm @ 100 psi	5-150	250	175°	5	11 3/8"	3 1/8"	4910K14	000000	4958K95	00000	2975N18	000000	7390K33	00000
B74G	3/4	3/4	140 scfm @ 100 psi	5-150	250	175°	5	11 3/8"	3 1/8"	4910K15	000000	4958K95	00000	2975N18	000000	7390K34	00000

Replacement Pressure Gauge	7390K711	Each	000000
Joiner Clamp	7390K2	Each	00000
Mounting Bracket	5001K12	Each	00000
Replacement Automatic Drain	5002K7	Each	00000
Service Kit	4910K37	Each	00000

Compressed Air Filter/Regulators for Particle Removal

A filter and regulator combined into a single unit, these filter/regulators provide clean, compressed air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Stacked filter/regulators are joined top-to-bottom, so they take up less horizontal space than inline filter/regulators. Inline filter/regulators are connected side-to-side, so each part can be replaced or repaired on its own. They help you reduce maintenance costs.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Filter/Regulators with Gauge—NPT Female Inlet and Outlet

Inline with Opaque Bowl and Sight Glass

Stacked with Clear Bowl

Stacked with Opaque Bowl

Stacked with
Opaque Bowl
and Sight Glass

Filter/Regulators
Pipe Size								Overall				Replacement Filter Elements		Replacement Filter Bowls		Mounting Brackets
Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Bowl Material	Max. Temp., °F	Removes Particle Size Down To, microns	Ht.	Wd.		Each		Each		Each		Each
Inline—Opaque Bowl with Sight Glass and Automatic Drain
1/4	1/4	49 scfm @ 100 psi	5-150	150	Zinc	140°	5	6 7/8"	4 1/2"	5001K23	0000000	4958K81	00000	______	00	4957K428	000000
1/4	1/4	61 scfm @ 100 psi	5-150	250	Aluminum	175°	5	7 3/8"	6"	5001K66	000000	4958K82	00000	______	00	4957K882	00000
3/8	3/8	49 scfm @ 100 psi	5-150	150	Zinc	140°	5	6 7/8"	4 1/2"	5001K25	000000	4958K81	0000	______	00	4957K428	00000
1/2	1/2	61 scfm @ 100 psi	5-150	250	Aluminum	175°	5	7 3/8"	6"	5001K24	000000	4958K82	00000	______	00	4957K882	00000
1/2	1/2	116 scfm @ 100 psi	5-150	250	Aluminum	175°	5	8 1/8"	6 7/8"	5001K22	000000	4958K95	00000	______	00	4957K882	00000
3/4	3/4	116 scfm @ 100 psi	5-150	250	Aluminum	175°	5	8 1/8"	6 7/8"	5001K34	000000	4958K95	00000	______	00	4957K882	00000
Stacked—Clear Bowl with Automatic Drain
1/8	1/8	13 scfm @ 100 psi	5-100	150	Polycarbonate Plastic	125°	5	6 3/8"	1 5/8"	9891K41	000000	4958K92	00000	2975N11	000000	9891K66	00000
1/4	1/4	14 scfm @ 100 psi	5-100	150	Polycarbonate Plastic	125°	5	6 3/8"	1 5/8"	9891K43	00000	4958K92	00000	2975N11	00000	9891K66	00000
Stacked—Opaque Bowl with Automatic Drain
1/8	1/8	13 scfm @ 100 psi	5-100	250	Zinc	150°	5	6 3/8"	1 5/8"	4910K21	000000	41615K21	00000	2975N11	00000	9891K66	00000
1/4	1/4	14 scfm @ 100 psi	5-100	250	Zinc	150°	5	6 3/8"	1 5/8"	4910K22	000000	41615K21	00000	2975N11	00000	9891K66	00000
Stacked—Opaque Bowl with Sight Glass and Automatic Drain
1/4	1/4	60 scfm @ 100 psi	5-150	150	Zinc	150°	5	8 1/2"	2"	4910K81	000000	4958K81	0000	______	00	4957K63	00000
3/8	3/8	60 scfm @ 100 psi	5-150	150	Zinc	150°	5	8 1/2"	2"	4910K82	000000	4958K81	0000	______	00	4957K63	00000

Replacement Drains

For Filter/Regulator Ht.	Drain Type		Each
6 3/8"	Automatic	4910K32	000000
8 1/2"	Automatic	4910K33	00000

Replacement Pressure Gauges

For Filter/Regulator Ht.		Each
6 3/8", 8 1/2"	7390K48	000000

Service Kits

For Filter/Regulator Ht.	Includes		Each
6 3/8"	Diaphragm, Filter Element, Gasket, O-Ring, Slip Ring, Spring, Valve, Valve Seat	4910K48	000000
8 1/2"	Diaphragm, Gaskets, O-Rings, Post, Spring, Valve Assembly	4910K35	00000

Corrosion-Resistant Compressed Air Filter/Regulators for Particle Removal

Opaque with
Sight Glass and
Automatic Drain

Built to resist corrosion, these filter/regulators withstand harsh environments that would cause standard filter/regulators to break down and fail. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone. They provide clean compressed air at your required pressure. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

ABS-coated aluminum filter/regulators are salt spray tested according to ISO 9227 standards, so they’re often used in marine and automotive environments. Their coating also protects them from wear, scratches, and chemicals. They have an automatic drain that periodically releases condensate into the air, so you don’t need to manually empty the bowl. Add mounting brackets (sold separately) to attach the filter/regulator to a wall or equipment.

Filter/Regulators
Pipe Size								Overall					Mounting Brackets		Replacement Filter Elements
Inlet	Outlet	Max. Flow Rate	Max. Pressure, psi	Pressure Adjustment	Pressure Regulating Range, psi	Removes Particle Size Down To, microns	Gauge Included	Wd.	Ht.	Specifications Met		Each		Each		Each
NPT Female Inlet and Outlet
ABS-Coated Aluminum Bowl—Opaque with Sight Glass and Automatic Drain
3/8	3/8	146 scfm @ 100 psi	290	T-Handle	5-145	5	Yes	2 3/4"	12"	ISO 9227	3297N15	0000000	4285K114	000000	4958K715	000000
1/2	1/2	146 scfm @ 100 psi	290	T-Handle	5-145	5	Yes	2 3/4"	12"	ISO 9227	3297N16	000000	4285K114	00000	4958K715	00000
3/4	3/4	146 scfm @ 100 psi	290	T-Handle	5-145	5	Yes	2 3/4"	12"	ISO 9227	3297N17	000000	4285K114	00000	4958K715	00000

Electronically-Controlled Compressed Air Filter/Regulators with Display

Connect these filter/regulators to your programmable logic controller (PLC) via IO-Link to remotely control the air pressure, monitor performance, and run diagnostics. You can also adjust the pressure with a knob and buttons on the face. Readings from the integrated sensor appear on a color-changing display—green for in range, red for out of range, and yellow for errors. You’ll need a connecting cable (sold separately) to connect these filter/regulators to your network. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Choose the coarsest (highest micron) filtration that meets your air quality needs to extend the life of the filter. To prevent unauthorized or accidental pressure changes, lock the knob with a padlock. You can also set a PIN code to secure the display and PLC. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Mounting brackets (sold separately) allow you to attach the regulator to a wall or equipment.

Filter/Regulators
			Pipe Size						Overall						Replacement Filter Elements		Replacement Filter Bowls		Mounting Brackets		Connecting Cables
Pressure Regulating Range, psi	Input Signal Current, mA	Input Signal Voltage	Inlet	Outlet	Removes Particle Size Down To, microns	Max. Flow Rate	Max. Pressure, psi	Max. Temp., °F	Wd.	Ht.	Features	Electrical Connection Type		Each		Each		Each		Each		Each
NPT Female Inlet and Outlet—LCD Display
Polycarbonate Plastic Bowl—Clear with Automatic Drain
4-145	20	18-30V DC	3/8	3/8	5	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N22	0000000	4958K714	000000	2975N114	000000	4285K114	000000	7138K15	000000
4-145	20	18-30V DC	3/8	3/8	40	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N21	000000	4958K713	00000	2975N114	00000	4285K114	00000	7138K15	00000
4-145	20	18-30V DC	1/2	1/2	5	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N32	000000	4958K714	00000	2975N114	00000	4285K114	00000	7138K15	00000
4-145	20	18-30V DC	1/2	1/2	40	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N31	000000	4958K713	00000	2975N114	00000	4285K114	00000	7138K15	00000
4-145	20	18-30V DC	3/4	3/4	5	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N42	000000	4958K714	00000	2975N114	00000	4285K114	00000	7138K15	00000
4-145	20	18-30V DC	3/4	3/4	40	146.2 scfm @ 100 psi	145	140°	2 3/4"	11 7/8"	Display PIN Lock, Padlockable Knob	Plug	8603N41	000000	4958K713	00000	2975N114	00000	4285K114	00000	7138K15	00000

Norgren Modular Compressed Air Filter/Regulators for Oil and Particle Removal

Series No. 82 and
Series No. 84 Bowl
Removal Clearance

Install these all-in-one units in your air supply line to deliver clean, compressed air at the pressure you need. They work in two stages: the stacked filter/regulator removes large particles and sets the pressure, then the coalescing filter captures fine oil aerosols. You can connect them to Norgren units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—to customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Slip a padlock through a hole in the knob to prevent unwanted pressure changes. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

These filter/regulators have a service indicator that turns increasingly red as the filter element clogs, so you’ll know when it needs to be replaced. When you remove the bowl, the filter element comes with it. This means you need minimal clearance for replacing the element or emptying condensate.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets to attach the filter/regulators to a wall or equipment.

Series No. 82—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size									Overall					Replacement Mounting Brackets		Joiner Clamps		End Block Sets
Manufacturer Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Oil Content Down To, ppm	Removes Particle Size Down To, microns	Filter Service Indicator Included	Ht.	Wd.	Includes		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Automatic Drain
B82G+F82C	1/4	1/4	55 scfm @ 100 psi	4.35-145	145	140°	0.01	0.01	Yes	9 3/8"	4 1/8"	Mounting Bracket	9287N11	0000000	7390K968	000000	7390K612	000000	7390K316	000000
B82G+F82C	3/8	3/8	55 scfm @ 100 psi	4.35-145	145	140°	0.01	0.01	Yes	9 3/8"	4 1/8"	Mounting Bracket	9287N12	000000	7390K968	00000	7390K612	00000	7390K317	00000

Replacement Filter Element for Particle Removal	4958K711	Each	000000
Service Kit	3058N111	Each	00000
Replacement Filter Element for Oil Removal	8282K111	Each	00000
Replacement Filter Bowl	2975N111	Each	00000

Series No. 84—NPT Female Inlet and Outlet

Filter/Regulators
	Pipe Size									Overall					Replacement Mounting Brackets		Joiner Clamps		End Block Sets
Manufacturer Series	Inlet	Outlet	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Oil Content Down To, ppm	Removes Particle Size Down To, microns	Filter Service Indicator Included	Ht.	Wd.	Includes		Each		Each		Each		Each
Polycarbonate Plastic Bowl—Clear with Automatic Drain
B84G+F84C	3/8	3/8	146 scfm @ 100 psi	4.35-145	145	140°	0.01	0.01	Yes	11 7/8"	5 1/2"	Mounting Bracket	9287N13	0000000	4285K114	000000	7390K614	000000	7390K318	000000
B84G+F84C	1/2	1/2	146 scfm @ 100 psi	4.35-145	145	140°	0.01	0.01	Yes	11 7/8"	5 1/2"	Mounting Bracket	9287N14	000000	4285K114	00000	7390K614	00000	7390K319	00000
B84G+F84C	3/4	3/4	146 scfm @ 100 psi	4.35-145	145	140°	0.01	0.01	Yes	11 7/8"	5 1/2"	Mounting Bracket	9287N15	000000	4285K114	00000	7390K614	00000	7390K321	00000

Replacement Filter Element for Oil Removal	8282K113	Each	000000
Service Kit	3058N112	Each	00000
Replacement Filter Element for Particle Removal	4958K713	Each	00000
Replacement Filter Bowl	2975N114	Each	00000