Filter by
Speed Limiting Force
Adjustability
Body Material
Compressed Length
Rod Material
Force Mechanism
Ball Socket Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Linear Speed Limiters
 |  |
Put an end to lids and doors that slam shut or fly open—install these speed limiters for smooth, controlled motion.
Compression Speed Limiter—Compression speed limiters prevent closing doors from slamming.
Extension Speed Limiter—Extension speed limiters prevent doors from flying open.
Compression-and-Extension Speed Limiter—Compression and extension speed limiters prevent doors from slamming and flying open.
Adjustable—For speed limiters with adjustable resistance, pull the rod until it's fully extended, then twist it to change the resistance.
Free Travel of Stroke—Free travel of stroke is the percentage of the stroke that speed limiters move with no resistance, before speed control engages.
Maximum Cycles per Minute—A cycle is one rod stroke from extended to compressed and back to extended.
Body | Rod | Ball Stud | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Extended Lg. | Compressed Lg. | Max. Force, lbf | Free Travel of Stroke | Max. Cycles per min., cpm | Material | Dia. | Material | Dia. | Thread Size | Seal Material | Dia., mm | Lg. | Thread Lg. | Thread Size | Temp. Range, ° F | Each | |||
Compression Speed Limiter | ||||||||||||||||||||
Variable Adjustment | ||||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9954K81 | 0000000 | ||
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9954K82 | 000000 | ||
| 2" | 8.3" | 6.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K84 | 000000 | ||
| 3" | 9.2" | 6.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9954K83 | 000000 | ||
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K85 | 000000 | ||
| 3.9" | 12.6" | 8.7" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K87 | 000000 | ||
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K86 | 000000 | ||
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K88 | 000000 | ||
| 7.9" | 20.5" | 12.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K89 | 000000 | ||
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9954K93 | 000000 | ||
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K91 | 000000 | ||
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9954K92 | 000000 | ||
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9954K94 | 000000 | ||
Fixed | ||||||||||||||||||||
| 2" | 7.9" | 5.9" | 50 | 30% | 6 | Electrocoated Steel | 0.59" | Nitride-Coated Steel | 0.25" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K61 | 00000 | ||
| 3" | 10" | 7" | 50 | 30% | 6 | Electrocoated Steel | 0.59" | Nitride-Coated Steel | 0.25" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K62 | 00000 | ||
| 4" | 12.2" | 8.2" | 100 | 30% | 6 | Electrocoated Steel | 0.87" | Nitride-Coated Steel | 0.32" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K63 | 00000 | ||
| 4" | 12.5" | 8.5" | 50 | 30% | 6 | Electrocoated Steel | 0.59" | Nitride-Coated Steel | 0.25" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K81 | 00000 | ||
| 5" | 14.5" | 9.5" | 100 | 30% | 6 | Electrocoated Steel | 0.87" | Nitride-Coated Steel | 0.32" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K64 | 00000 | ||
| 5" | 15" | 10" | 50 | 30% | 6 | Electrocoated Steel | 0.59" | Nitride-Coated Steel | 0.25" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K82 | 00000 | ||
| 6" | 17" | 11" | 100 | 30% | 6 | Electrocoated Steel | 0.87" | Nitride-Coated Steel | 0.32" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K65 | 00000 | ||
| 7" | 19.7" | 12.7" | 100 | 30% | 6 | Electrocoated Steel | 0.87" | Nitride-Coated Steel | 0.32" | M6 × 1 mm | — | 10 | 1.28" | 0.55" | 5/16"-18 | -22 to 176 | 6521K83 | 00000 | ||
Extension Speed Limiter | ||||||||||||||||||||
Variable Adjustment | ||||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9898K81 | 000000 | ||
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9898K82 | 000000 | ||
| 2" | 8.3" | 6.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K84 | 000000 | ||
| 3" | 9.2" | 6.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9898K83 | 000000 | ||
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K85 | 000000 | ||
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K86 | 000000 | ||
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K88 | 000000 | ||
| 7.9" | 20.5" | 12.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K89 | 000000 | ||
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9898K93 | 000000 | ||
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K91 | 000000 | ||
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9898K92 | 000000 | ||
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9898K94 | 000000 | ||
Compression-and-Extension Speed Limiter | ||||||||||||||||||||
Variable Adjustment | ||||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9899K81 | 000000 | ||
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9899K82 | 000000 | ||
| 2" | 8.2" | 6.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K84 | 000000 | ||
| 3" | 9.3" | 6.3" | 112 | 20% | Not Rated | Anodized Aluminum | 0.59" | Chrome-Plated Steel | 0.24" | M5 × 0.8 mm | Buna-N | 13 | 0.97" | 0.35" | M5 × 0.8 mm | -4 to 175 | 9899K83 | 000000 | ||
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K85 | 000000 | ||
| 3.9" | 12.6" | 8.7" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K87 | 000000 | ||
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Anodized Aluminum | 0.87" | Chrome-Plated Steel | 0.31" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K86 | 000000 | ||
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K88 | 000000 | ||
| 7.9" | 20.4" | 12.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K89 | 000000 | ||
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9899K93 | 000000 | ||
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K91 | 000000 | ||
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Anodized Aluminum | 1.1" | Chrome-Plated Steel | 0.39" | M8 × 1.25 mm | Buna-N | 13 | 1.52" | 0.65" | M8 × 1.25 mm | -4 to 175 | 9899K92 | 000000 | ||
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Anodized Aluminum | 1.57" | Chrome-Plated Steel | 0.55" | M14 × 1.5 mm | Buna-N | 13 | 2.48" | 1.1" | M14 × 1.5 mm | -4 to 175 | 9899K94 | 000000 | ||
Corrosion-Resistant Linear Speed Limiters
 |  |
Body | Rod | Ball Stud | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Extended Lg. | Compressed Lg. | Max. Force, lbf | Free Travel of Stroke | Max. Cycles per min., cpm | Material | Dia. | Material | Dia. | Thread Size | Seal Material | Dia. | Lg. | Thread Lg. | Thread Size | Temp. Range, ° F | Each | |||
Compression Speed Limiter | ||||||||||||||||||||
Fixed | ||||||||||||||||||||
| 2" | 7.9" | 5.9" | 150 | 35% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N11 | 000000 | ||
| 3" | 10" | 7" | 150 | 31% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N12 | 00000 | ||
| 4" | 12.2" | 8.2" | 250 | 32% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N13 | 00000 | ||
| 4" | 12.5" | 8.5" | 150 | 28% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N14 | 00000 | ||
| 5" | 14.5" | 9.5" | 250 | 31% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N15 | 00000 | ||
| 7" | 19.7" | 12.7" | 250 | 29% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 3975N18 | 00000 | ||
Compression-and-Extension Speed Limiter | ||||||||||||||||||||
Fixed | ||||||||||||||||||||
| 2" | 7.9" | 5.9" | 150 | 35% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N11 | 00000 | ||
| 3" | 10" | 7" | 150 | 31% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N12 | 00000 | ||
| 4" | 12.2" | 8.2" | 250 | 32% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N13 | 00000 | ||
| 5" | 14.5" | 9.5" | 250 | 31% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N15 | 00000 | ||
| 5" | 15" | 10" | 150 | 27% | 6 | 316 Stainless Steel | 0.59" | Chrome-Plated 316 Stainless Steel | 0.25" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N16 | 00000 | ||
| 6" | 17" | 11" | 250 | 30% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N17 | 00000 | ||
| 7" | 19.7" | 12.7" | 250 | 29% | 6 | 316 Stainless Steel | 0.71" | Chrome-Plated 316 Stainless Steel | 0.32" | M6 × 1 mm | TPE | 0.39" | 1.2" | 0.54" | 5/16"-18 | -20 to 170 | 8025N18 | 00000 | ||
Precise-Control Linear Speed Limiters
 |
Regulate the speed or feed rate of drill presses, milling machines, lathes, and similar devices. These speed limiters have a knob with numbered scale so you can make precise adjustments to the resistance. Insert a rod in the mounting hole in the knob to rotate for adjustments.
A cycle is one rod stroke from extended to compressed and back to the original extended position.
0% Free Travel of Stroke—Free travel of stroke is 0%, so the entire stroke is speed controlled.
Body | Rod | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Extended Lg. | Compressed Lg. | Max. Force, lbf | Free Travel of Stroke | Material | Dia. | Material | Dia. | Seal Material | Adjustment Hole Dia. | Temp. Range, ° F | Each | |||
Compression Speed Limiter | |||||||||||||||
Variable Adjustment | |||||||||||||||
| 0.6" | 6.26" | 5.67" | 780 | 0% | Anodized Aluminum | 0.94" | Chrome-Plated Steel | 0.31" | EPDM | — | 32 to 140 | 1267N11 | 0000000 | ||
| 1.2" | 8.15" | 6.97" | 780 | 0% | Anodized Aluminum | 0.94" | Chrome-Plated Steel | 0.31" | EPDM | — | 32 to 140 | 1267N21 | 000000 | ||
| 2" | 10.87" | 8.87" | 1,200 | 0% | Zinc-Plated Steel | 0.94" | Stainless Steel | 0.31" | Neoprene | 0.31" | 40 to 135 | 1267N3 | 000000 | ||
| 3" | 14.71" | 11.76" | 780 | 0% | Anodized Aluminum | 0.94" | Chrome-Plated Steel | 0.31" | EPDM | — | 32 to 140 | 1267N41 | 000000 | ||
 |  |  |
1 1/4" Width | .39" Mounting Hole Dia., 1.44" Ctr.-to-Ctr. Mounting Hole Ht. |
Wd. | Ht. | Dp. | Material | Mounting Hole Dia. | Mounting Hole Ctr.-to-Ctr. Ht. | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1 1/4" | 2 1/4" | 1 1/4" | Aluminum | 0.39" | 1.44" | 4246T51 | 000000 |
