For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.