These withstand at least double the pressure of our other timer-operated drain valves. Set the electronic timer to open automatically at your specified time interval. These drain valves are excellent for compressed air systems with high oil content because they resist clogging when water, oil, and sediment combine to form sludge. Install drain valves after separators, dryers, filters, and aftercoolers to collect and remove water from your air line. 

Drain valves that meet NEMA 4 are rated for protection from dirt and washdowns. Drain valves that meet NEMA 4X are rated for protection from dirt, washdowns, and corrosion.

Install optional strainers before drain valves to prevent damage from debris in your pipeline.

For technical drawings and 3-D models, click on a part number.

Able to withstand up to 400 psi, these have the highest pressure rating of all our float-operated drain valves. Also known as drip legs, these drain valves have a float that automatically opens the drain when the bowl begins to fill. Install them at low points in your line after separators, dryers, filters, and aftercoolers.

For technical drawings and 3-D models, click on a part number.

Keep an eye on condensate collecting in your compressed air line. These drain valves have a clear bowl, so you can see inside to inspect the contents. Also known as drip legs, these have a float that automatically opens the drain when the bowl begins to fill. Install them at low points in your line after separators, dryers, filters, and aftercoolers. Drains can be serviced without removing them from your air line.

For technical drawings and 3-D models, click on a part number.

An external drain provides quick, easy access for cleaning. Also known as drip legs, these drain valves have a float that automatically opens the drain when the bowl begins to fill. Install them at low points in your line after separators, dryers, filters, and aftercoolers. Drains can be serviced without removing them from your air line.

For technical drawings and 3-D models, click on a part number.

With a discharge capacity of more than four gallons per minute, these drain valves can handle large compressed air systems. Also known as drip legs, these drain valves have a float that automatically opens the drain when the bowl begins to fill. Install them at low points in your line after separators, dryers, filters, and aftercoolers. Drains can be serviced without removing them from your air line.

For technical drawings and 3-D models, click on a part number.

Sized right for tight spots. Also known as drip legs, these drain valves have a float that automatically opens the drain when the bowl begins to fill. Install them at low points in your line after separators, dryers, filters, and aftercoolers. Drains can be serviced without removing them from your air line.

For technical drawings and 3-D models, click on a part number.

When your compressor turns off, it creates back pressure that opens these valves automatically, allowing liquid to escape. Moisture is atomized as it is discharged through the included muffler, eliminating the need for discharge piping. The muffler also minimizes noise. Install drain valves after coolers, separators, dryers, and filters.

For technical drawings and 3-D models, click on a part number.

Save energy by minimizing the loss of compressed air. Unlike other drain valves, these only open when they're full. They close before the reservoir is completely empty, so no air escapes from the system. Install them at low points in your air line after separators, dryers, filters, and aftercoolers.

Air-powered valves don’t need to be plugged into an electrical outlet. When water raises the float to a set point, these valves open. They have a simple internal design and large openings to prevent clogs. Drain valves with an air pilot require an additional line of air to operate. Install a 5-micron particle filter (sold separately) before the 1- and 3.5-gpm capacity valves.

Electric-powered valves have a sensor. When condensate inside the valve rises to the level of the sensor, the valve opens to drain. Valves detect when they’re blocked—they automatically open and close to attempt to remove the blockage and sound an alarm if they’re still blocked. Drain valves with a contact for remote signaling device can be wired to activate a remote alarm if blocked.

A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools, preventing equipment damage and wear caused by moisture. Install in your air line after compressors and aftercoolers.

Separators with a sight glass allow you to see inside the bowl to monitor contents.

For technical drawings and 3-D models, click on a part number.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler. They have an automatic drain to discharge the moisture.

For technical drawings and 3-D models, click on a part number.

Install these valves on your air storage tank outlet—at the end of the day, they automatically close to save energy. While in the off position, the tank stays pressurized so the compressor doesn't run when you don't need it to, even if there are small leaks from pipe fittings, drip legs, and other downstream connections. Also known as solenoid valves, these valves actuate when voltage is applied to the electrical connection. They operate on a timer that can be programmed to work with a regular schedule, but they also have a manual override if your schedule changes. They gradually open to prevent system damage from suddenly starting flow.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.

For technical drawings and 3-D models, click on a part number.

Also known as stop cocks, install these valves on your tank for easy draining.

Valves with external seal are for higher flow applications than valves with an internal seal.