We will reply to your message within an hour.
More
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Able to withstand temperatures of up to 2000° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.
These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.
Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.
Protect concrete from mild chemicals, salts, soaps, and detergents.
Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.
Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Mark traffic lanes, parking lots, and factory floors.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Make items stand out under emergency lighting or in low-light environments.
Create a washable writing surface.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.
Remove grease, oil, and dirt from your concrete floors.
This high-visibility chalk fluoresces when light shines on it, even in dark environments.
Includes an assortment of colors.
Includes one black, blue, green, and red marker.
Write on damp surfaces and in wet conditions without smearing.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Includes 12 black markers.
Load this chalk into chalk line reels to mark straight lines for both indoor and outdoor projects.
This chalk leaves a water-resistant mark that lasts three times longer than marks made with standard powdered chalk.
Easily hold this half-moon-shaped chalk to coat snap lines for line marking.