About Paint and Protective Coatings
More
About Structural Adhesives
More
Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/727/7270t2p1-g01e-digital@halfx_637074238730397544.png?ver=imagenotfound)
Also known as conformal coatings, use these coatings to protect circuit boards from moisture. Product regulations restrict sales to the listed jurisdictions/areas.
Acrylic and acrylic lacquer coatings dry quickly. Sprayon EL2000 resists grease, oil, and alkalies.
Silicone coatings have excellent chemical resistance for use in harsh environments.
Dry Time | Temp. Range, °F | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. | Mfr. Model No. | Container Net Weight, oz. | Touch, min. | Overall | Dielectric Strength, V/mil | Thermal Conductivity | Min. | Max. | Specifications Met | For Use Outdoors | For Use On | Color | Cannot Be Sold To | Each | |
Acrylic Coatings | |||||||||||||||
__ | __ | 12 | 3 | 24 hrs. | 1,000 | Not Rated | -85° | 250° | __ | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | Outside United States and Canada | 0000000 | 000000 |
Acrylic Lacquer Coatings | |||||||||||||||
Sprayon | EL2000 | 11 | 10 | 30 min. | 8,000 | Not Rated | Not Rated | 150° | Fed. Spec. TT-L-50 | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | __ | 0000000 | 00000 |
Silicone Coatings—Hard | |||||||||||||||
__ | __ | 12 | 60 | 72 hrs. | 1,100 | 0.18 W/m-K | -85° | 390° | __ | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | Outside United States and Canada | 0000000 | 00000 |
Heavy Duty Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-bottle2-digital@halfx_637159000821811243.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-syringe2-digital@halfx_637074246192113867.png?ver=imagenotfound)
Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. They require an ultraviolet curing lamp to reach full strength. Use them to secure and insulate hardware on printed circuit boards.
Syringe coatings require a gun (sold separately) to dispense.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. | Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall | Hardness Rating | Dielectric Strength, V/mil | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
Bottle Coatings | |||||||||||||
__ | __ | 1 4/5 | Thin Liquid | 10 | 60 sec. | Not Rated | 34,000 | -65° to 350° | 10 seconds @ 7 mW/cm 2 | Aluminum, Brass, Copper, Steel, Stainless Steel, Silver, Titanium, Fiberglass | Amber | 00000000 | 000000 |
Syringe Coatings | |||||||||||||
Loctite® | 3751 | 4/5 | Thin Liquid | 10 | 2 min. | Extra Hard | 730 | -65° to 270° | 10 seconds @ 100 mW/cm 2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Yellow | 00000000 | 00000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty Optically Clear Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating requires an ultraviolet curing lamp to reach full strength. Dispense with a gun (sold separately).
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Hardness Rating | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
0.8 | Thick Liquid | 10 | 24 | Extra Hard | -65° to 300° | 15 seconds @ 100 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Clear | 0000000 | 0000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty High-Purity Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating begins to harden when exposed to UV light. Use it to secure and insulate hardware on printed circuit boards. It requires a gun (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
Loctite® Coatings—Medium Soft | |||||||||||
5240 | 0.85 | Thick Liquid | 10 | 72 | 533.4 | -65° to 195° | 60 seconds per side @ 70 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Composites | Green | 0000000 | 000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, epoxies have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. Dispense with a mixer nozzle and a gun (each sold separately).
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
E-00CL | 1.7 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 000000 |
E-00CL | 6.8 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 00000 |
Heavy Duty High-Purity Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coating flows easily into small spaces between electrical components. Use it to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, has excellent chemical and moisture resistance, withstands a wide range of temperatures, and provides excellent electrical insulation. It requires a gun and a mixer nozzle (each sold separately) to dispense.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
M-21HP | 1.7 fl. oz. | Paste | 20 | 24 | 500 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Off-White | 0000000 | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Heavy Duty Heat-Transfer Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
This thermally conductive coating keeps electrical components cool by dissipating heat. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1 | Paste | 5 | 2 | 750 | 0.864 | -85° to 347° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | White | 0000000 | 000000 |
Protective Coatings for Circuit Boards
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g02/g02a-generic-bottle-squeeze1-digital@halfx_637074240090670466.png?ver=imagenotfound)
Shield circuit boards from flux, solder, conformal coatings, and high temperatures. Heat resistant up to 640° F, these temporary coatings are most often used to protect open through-holes and components during wave soldering. Coatings can also act as a short-term adhesive to keep parts in place when you’re soldering a two-sided SMT circuit board. An alternative to masking tapes that require cutting to shape, these gel coatings flow easily into small spaces and don’t leave a residue when removed. They’re also known as solder masks. Product regulations restrict sales to the listed jurisdictions/areas.
Choose wash-away coatings if you use a water-based cleaning process such as a batch or in-line cleaning system. Wash-away coatings with a one-hr. overall dry time are nonflammable. They’re not completely water soluble, so they can’t be used in closed-loop cleaning systems. Coatings with a two-hr. overall dry time are completely water soluble for use in closed-loop cleaning systems. They’re slightly flammable.
Choose peel-away coatings if you use a solvent-based cleaning process or don’t clean your circuit boards. Coatings with a 15-min. overall dry time cure more evenly than peel-away coatings with a one-hr. overall dry time, so they can be applied in thick layers. They’re also nonflammable. Peel-away coatings with a one-hr. overall dry time produce low odors because they don’t contain ammonia.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall | Max. Temp., °F | Specifications Met | For Use On | Color | Features | Cannot Be Sold To | Each | |
Wash Away | |||||||||||
8 | Gel | 60 | 1 hrs. | 640° | MIL-STD-2000 | Aluminum, Brass, Copper, Steel, Stainless Steel, Titanium, Gold, Silver | Blue | __ | Outside United States and Canada | 000000 | 000000 |
8 | Gel | 60 | 2 hrs. | 640° | __ | Aluminum, Brass, Copper, Steel, Stainless Steel, Titanium, Gold, Silver | Red | Closed-Loop Compatible | Outside United States and Canada | 000000 | 00000 |
Peel Away | |||||||||||
8 | Gel | 15 | 15 min. | 640° | MIL-STD-2000 | Aluminum, Brass, Steel, Stainless Steel, Titanium, Gold, Silver | White | __ | Outside United States and Canada | 000000 | 00000 |
8 | Gel | 60 | 1 hrs. | 640° | MIL-STD-2000 | Aluminum, Brass, Copper, Steel, Stainless Steel, Titanium, Gold, Silver | Red | __ | Outside United States and Canada | 000000 | 00000 |
Ready-to-Use Silicone Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_637074239130713508.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11-rev@halfx_g3dtu_1719350786.png?ver=imagenotfound)
No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).
Potting compounds that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Dry Time | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Clarity | Color | Cannot Be Sold To | Each | |
Dow Corning Compounds—Medium Soft | |||||||||||||||
738 | 3 | Tube | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 000000 |
738 | 10 1/10 | Cartridge | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 00000 |
Dow Corning Compounds—Soft | |||||||||||||||
3165 | 10.3 | Cartridge | Paste | 4 min. | 24 | 500 | Not Rated | -45° to 390° | UL 94 V-0 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Glass | Opaque | Gray | __ | 0000000 | 00000 |
748 | 3 | Tube | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
748 | 10 1/10 | Cartridge | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
838 | 3 | Tube | Paste | 45 min. | 24 | Not Rated | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Opaque | White | __ | 0000000 | 00000 |
839 | 10.3 | Cartridge | Paste | 35 min. | 24 | Not Rated | Not Rated | -45° to 390° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Semi-Clear | Blue | __ | 0000000 | 00000 |
Loctite® Compounds—Soft | |||||||||||||||
5091 | 10 1/10 | Cartridge | Thick Liquid | 20 sec. | 24 | 450 | Not Rated | -65° to 350° | UL Recognized Component | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Semi-Clear | White | __ | 0000000 | 000000 |
5145 | 3 | Tube | Thick Liquid | 2 min. | 72 | 450 | 0.2 | -45° to 390° | MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Semi-Clear | White | __ | 0000000 | 00000 |
5145 | 10 1/10 | Cartridge | Thick Liquid | 2 min. | 72 | 450 | 0.2 | -45° to 390° | MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Semi-Clear | White | __ | 0000000 | 000000 |
Momentive/GE Compounds—Soft | |||||||||||||||
RTV162 | 2 4/5 | Tube | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
RTV162 | 10 1/10 | Cartridge | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
Two-Part Silicone Potting Compounds
Encase electronic assemblies in a layer of silicone for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They’re also known as RTV (room-temperature vulcanizing).
Cartridge potting compound requires a gun (sold separately) to dispense; use it with the included mixer nozzle.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Dry Time | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1.7 | Thick Liquid | 25 | 48 | 0.18 | -55° to 390° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Clear | 00000000 | 000000 |
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/j05/j05-generic-cantube-@halfx_637159690348937679.png?ver=imagenotfound)
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Color | Each | |
Momentive/GE Compounds—Medium Soft | ||||||||||||
RTV11 | 16 | Thick Liquid | 90 min. | 24 | 515 | 0.29 | -65° to 400° | GSA A-A-56023A | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | White | 00000000 | 0000000 |
Momentive/GE Compounds—Medium Hard | ||||||||||||
RTV60 | 16 | Thick Liquid | 2 hrs. | 24 | 450 | 0.31 | -65° to 500° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Red | 00000000 | 000000 |
Optically Clear Two-Part Silicone Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Use it to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compound is the best choice for high-temperature applications and electronics exposed to thermal cycling. It has good moisture resistance but poor chemical and abrasion resistance. Silicone provides excellent electrical insulation. It’s also known as RTV (room-temperature vulcanizing). Use a gun (sold separately) with the included mixer nozzle to dispense.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, min. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Soft | |||||||||||
5620 | 13.5 | Thin Liquid | 20 | 30 | 530 | 0.16 | -65° to 390° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Clear | 00000000 | 0000000 |
Urethane Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation. Use a gun (sold separately) with the included mixer nozzle to dispense.
US2350™ also require a 4:1 plunger (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Medium Hard | |||||||||||
US2350 | 1.69 | Thick Liquid | 90 | 24 | 950 | 0.51 | -40° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Black | 0000000 | 000000 |
Loctite® Compounds—Soft | |||||||||||
US2651 | 6.76 | Thin Liquid | 10 | 16 | 1,050 | Not Rated | -85° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Amber | 0000000 | 00000 |
High-Purity Urethane Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors. Encase electronic assemblies in a layer of material for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethane withstands a wide range of temperatures and is the best choice for cold-temperature applications. It has excellent flexibility, good chemical and moisture resistance, and provides good electrical insulation. Use a gun (sold separately) with the included mixer nozzle to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Hard | |||||||||||
US1750 | 1.7 | Thin Liquid | 5 | 16 | 1,250 | 0.19 | -40° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Clear | 0000000 | 000000 |
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/737/7370a39-74695a71c11580228731-p9@halfx_637158041691926908.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
3M DP460EG and DP4XLEG also require a plunger to dispense.
Loctite® ES1001™, ES1902™, and ES2500™ come with a mixer nozzle.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
DP270 | 1.64 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |
DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 00000 | |
DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Black | 00000000 | 000000 |
DP460EG | 1.69 | Thick Liquid | 110 min. | 7 days | 510 | Not Rated | 0° to 175° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
DP4XLEG | 1.69 | Thick Liquid | 5 hrs. | 7 days | 670 | Not Rated | -40° to 120° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
Loctite® Compounds—Extra Hard | ||||||||||||
3336 | 1.4 | Thick Liquid | 15 min. | 24 hrs. | Not Rated | Not Rated | -65° to 350° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Amber | 0000000 | 00000 |
E-60NC | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 6.8 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 13.5 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
ES1001 | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 1,100 | 0.29 | -10° to 220° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Black | 0000000 | 00000 |
ES1902 | 1.7 | Thin Liquid | 60 min. | 24 hrs. | 1,350 | Not Rated | -40° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Clear | 0000000 | 00000 |
ES2500 | 1.7 | Thin Liquid | 10 min. | 16 hrs. | 410 | 0.28 | -40° to 220° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Black | 0000000 | 00000 |
Mixer Nozzle for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 20) | 00000000 | Each | 0000 |
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 16) | 0000000 | Each | 0000 |
Plunger for 1.69 fl. oz. 3M DP460EG Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
Mixer Nozzle for 6.8 fl. oz. and 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 0000 |
Dispensing Gun for 6.8 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Plunger for 1.4 fl. oz. Loctite Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 1.4 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.7 fl. oz. Loctite Cartridges | 00000000 | Each | 00000 |
Mixer Nozzle for 1.7 fl. oz. Loctite E-60NC Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Optically Clear Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Loctite® ES1901™ comes with a mixer nozzle.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Extra Hard | |||||||||||
ES1901 | 1.7 | Thick Liquid | 3 | 24 | 400 | Not Rated | -40° to 220° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Clear | 0000000 | 000000 |
Optically Clear Epoxy Potting Compounds—Extra Hard | |||||||||||
__ | 1.7 | Thick Liquid | 40 | 24 | 229 | 0.45 | -65° to 275° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Amber | 0000000 | 00000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a52p1-b05-digital@halfx_637073782957202076.png?ver=imagenotfound)
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
0.9 | Thick Liquid | 25 min. | 24 | 450 | 1.87 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 000000 |
1 | Gel | 4 hrs. | 6 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 00000 |
1.5 | Thin Liquid | 30 min. | 26 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a26p1-b05-digital@halfx_637073750249800938.png?ver=imagenotfound)
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | For Use On | Color | Each | |
1 | Thick Liquid | 25 | 24 | 450 | 1.87 | 500° | Steel, Ceramic, Glass | Black | 0000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1.7 | Thick Liquid | 15 | 8 | 520 | 1.01 | -40° to 210° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a24p1-b05-digital@halfx_637073775372051541.png?ver=imagenotfound)
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Mix Ratio | Tensile Strength, psi | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
16 | Thin Liquid | 30 min. | 26 | 6:1 | 9,500 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 0000000 |
19 | Thick Liquid | 25 min. | 24 | 12:1 | 10,900 | 450 | 1.87 | 500° | __ | Steel, Ceramic, Glass | Black | 0000000 | 000000 |
20 | Gel | 4 hrs. | 6 | 4:1 | 11,000 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Steel, Ceramic, Glass | Black | 0000000 | 000000 |
Adjustable-Flexibility Heat-Transfer Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-jar-digital@halfx_637074242066702698.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a52p1-b05-digital@halfx_637073782957202076.png?ver=imagenotfound)
Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
Jar Compounds | ||||||||||||
12 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 0000000 |
24 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
Jar and Syringe Compounds | ||||||||||||
1.6 | Thick Liquid | 30 | 26 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1.01 | -100° to 450° | 2 hrs. @ 250° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 00000 |
EMI Shielding Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/727/7270t2p1-g01e-digital@halfx_637074238730397544.png?ver=imagenotfound)
Protect sensitive electronic parts, enclosures, and prototypes from electromagnetic interference (EMI) with these coatings. Since they’re conductive, they block EMI from disrupting electrical and data signals, which can cause circuit malfunctioning and data loss.
For best adhesion, apply to clean, oil-free surfaces. If applying to highly chemical-resistant plastics such as PVC and PTFE, use a primer first.
Dry Time | ||||||||
---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Consistency | Touch, min. | Overall, hrs. | Temp. Range, °F | For Use On | Color | Each | |
12 | Thin Liquid | 30 | 24 | Not Rated to 185° | Plastic | Silver | 00000000 | 0000000 |