Contact Adhesives | McMaster-Carr

	Container Type Container Type


Aerosol Can	Can

Brush-Top Can	Tube

Bottle	Brush-Top Bottle

Jug	Cartridge

Pail

	For Joining For Joining

	For Use On For Use On

	Color Color

	Clear		Beige
	Light Yellow		Amber
	White		Black
	Yellow		Purple
	Off-White		Blue
	Orange		Brown
	Gray

	Manufacturer Manufacturer

	Manufacturer Model Number Manufacturer Model Number

3
4
4SC
16
20
25
35
40
42
72
74
74CA
76
77
77CA
80
90
90CA
94ET
826
1099
1357
2262
4052
4475
4693
4707
4807
HT-30
1000NF

	Adhesive Type Adhesive Type

	Container Size Container Size

	Type Type

Adhesive

Applicator

	Formulation Formulation

	Begins to Harden Begins to Harden

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	Approximate Coverage Approximate Coverage

	Reaches Full Strength Reaches Full Strength

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Cure Type Cure Type

Room Temperature

Heat

	Mixing Required Mixing Required

Yes

	Shear Strength Shear Strength

	Consistency Consistency

Thin Liquid

Thick Liquid

Paste

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

85 Products

About Structural Adhesives

About Finishing

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

4693 works on hard-to-bond plastics, such as polypropylene and polyethylene.

Black adhesive works especially well on foam insulation.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
3M Adhesives
826	32 fl. oz.	Can	45 min.	72 hrs.	1,810	Thin Liquid	1,000	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	0000000
1099	32 fl. oz.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	00000
1099	1 gal.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	00000000	000000
1357	1 gal.	Can	10 min.	24 hrs.	158	Thin Liquid	325	-30° to 220°	Light Yellow	Ceramic, Glass, Masonry, Metal, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
2262	32 fl. oz.	Can	10 min.	24 hrs.	Not Rated	Thin Liquid	525	-10° to 230°	Clear	Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	000000
4475	32 fl. oz.	Can	10 min.	72 hrs.	Not Rated	Thick Liquid	8,500	-10° to 230°	Clear	Ceramic, Fabric, Glass, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
4693	32 fl. oz.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	00000
4693	1 gal.	Can	60 min.	72 hrs.	Not Rated	Thin Liquid	225	-10° to 230°	Amber	Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, Northern VA, VT	00000000	000000
Pliobond Adhesives
20	1 fl. oz.	Tube	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Glass, Metal, Plastic, Rubber	__	0000000	0000
25	8 fl. oz.	Brush-Top Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	16 fl. oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	__	0000000	00000
25	32 fl. oz.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
25	1 gal.	Can	3 min.	14 days	1,200	Thin Liquid	800	-40° to 370°	Beige	Ceramic, Metal, Plastic, Rubber	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000
35	8 fl. oz.	Brush-Top Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	0000000	00000
35	16 fl. oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	0000000	00000
35	32 fl. oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	00000
35	1 gal.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000
Weldwood Adhesives
__	3 fl. oz.	Bottle	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 150°	Beige	Composites, Plastic, Rubber, Wood	__	0000000	0000
__	16 fl. oz.	Can	15 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Beige	Composites, Plastic, Rubber, Wood	__	0000000	00000
Adhesives
__	4 fl. oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	8 fl. oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	16 fl. oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	__	000000	00000
__	16 fl. oz.	Brush-Top Can	3 min.	36 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 250°	Black	Foam, Masonry, Metal, Plastic, Rubber	__	00000000	00000
__	32 fl. oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	00000
__	1 gal.	Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	000000	000000

Nonflammable Contact Adhesives

Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.

Container
Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength	Consistency	Viscosity	Temp. Range, °F	Color	For Joining		Each
Weldwood Adhesives
32 fl. oz.	Can	30 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Amber	Cardboard, Composites, Fabric, Wood	0000000	000000
1 gal.	Can	30 min.	72 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 180°	Amber	Cardboard, Composites, Fabric, Wood	0000000	00000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container
Mfr. Model No.	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	For Joining	Color		Each
3M Adhesives
1000NF	1	Jug	60 sec.	10 min.	400	Thin Liquid	750	60° to 80°	Fabric, Foam, Wood	Purple	00000000	0000000

High-Temperature Contact Adhesives

These adhesives resist temperatures up to 500° F, as well as chemicals, fuels, grease, and water. Apply them to both surfaces, air dry, and then bring together to bond. Heat to 300° F to reach full strength. They cannot be sold to the regions listed because these adhesives exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Heating Requirements to Reach Full Strength	Shear Strength, lbs./sq. in.	Cure Type	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		Each
Pliobond Adhesives
HT-30	32 oz.	Can	3 min.	30 min.	30 min. @ 300° F	1,450	Heat, Room Temperature	Thick Liquid	6,500	-40° to 500°	Beige	Ceramic, Metal	CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT	000000	000000
HT-30	1 gal.	Can	3 min.	30 min.	30 min. @ 300° F	1,450	Heat, Room Temperature	Thick Liquid	6,500	-40° to 500°	Beige	Ceramic, Metal	CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT	000000	000000

Spray Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

												Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	CA	0000000	000000	000000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	0000000	00000	00000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	Yes	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	00000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	__	0000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	__	0000000	00000	00000
77	13.44	21 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77	16.8	26 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	White	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77CA	18	28 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	__	0000000	00000	00000
94ET	19.8	31 sq. ft. @ 2.5 gm/ft²	No	10 min.	24 hrs.	300	0° to 210°	Clear	Ceramic, Composites, Glass, Metal, Plastic	__	0000000	00000	00000

High-Strength Spray Adhesives

Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

80 bonds rubber and vinyl.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

							Temp. Range, °F						Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Min.	Max.	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
80	19	29 sq. ft. @ 2.5 gm/ft²	No	3 min.	24 hrs.	600	Not Rated	200°	Yellow	Plastic, Rubber	CA	0000000	000000	000000
90	12.23	19 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	CA	0000000	00000	00000
90	17.6	27 sq. ft. @ 2.5 gm/ft²	Yes	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	CA	00000000	00000	00000
90CA	19	29 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	__	0000000	00000	00000

Temporary Positioning Spray Adhesives

Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.

Gorilla Adhesives
Container Net Weight, oz.	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear Strength	Max. Temp., °F	Color	For Joining		Each
14	400 sq. ft. @ 1 gm/ft²	5 min.	24 hrs.	Not Rated	90°	Clear	Fabric, Metal	0000000	000000

Pressure-Sensitive Spray Adhesives

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond. The blue color shows where adhesive has been applied. They cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

											Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear Strength	Max. Temp., ° F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
72	17.3	27 sq. ft. @ 2.5 gm/ft²	60 sec.	24 hrs.	Not Rated	120°	Blue	Composites, Foam, Metal, Plastic, Rubber, Wood	CA	0000000	000000	000000

High-Tack Spray Adhesives

These spray glues adhere quickly. Spray a thin, uniform coating on one surface, air dry, and then bring together to bond. They cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

											Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear Strength	Max. Temp., °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
76	18.1	28 sq. ft. @ 2.5 gm/ft²	60 sec.	24 hrs.	Not Rated	160°	White	Metal, Plastic, Wood	CA	0000000	000000	000000

Rubber Cement

Rubber cement allows repositioning until fully dried. Use it on paper and cardboard.

Cement that cannot be sold to the regions listed exceeds local regulatory limits on VOC (volatile organic compounds).

Container
Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity	Max. Temp., °F	Color	For Joining	Cannot Be Sold To		Each
8 fl. oz.	Brush-Top Bottle	5 sec.	12 hrs.	Thin Liquid	Not Rated	150°	Clear	Cardboard	__	00000000	00000
32 fl. oz.	Bottle	5 sec.	12 hrs.	Thin Liquid	Not Rated	150°	Clear	Cardboard	CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT	00000000	00000

Cement for Plastic

Form strong bonds on most plastics.

Cement that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range	Color	For Joining	Cannot Be Sold To		Each
SciGrip Cement
16	1.5 fl. oz.	Tube	5 min.	21 days	Thin Liquid	800	Not Rated	Clear	Plastic, Rubber	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
3	16 fl. oz.	Can	60 sec.	7 days	Thin Liquid	Not Rated	Not Rated	Clear	Plastic, Rubber	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
4052	16 fl. oz.	Can	15 min.	7 days	Thin Liquid	500	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	00000
4707	1 gal.	Can	10 min.	21 days	Thick Liquid	4,000	Not Rated	White	Plastic	__	0000000	000000
4807	1 gal.	Can	10 min.	21 days	Thin Liquid	600	Not Rated	White	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	0000000	000000

Nonwhitening Cement for Acrylic

When appearance is important, this cement dries clear and forms strong bonds on acrylic.

Cement that cannot be sold to the regions listed exceeds local regulatory limits on VOCs (volatile organic compounds).

Cement
	Container													Dispensing Guns		Mixer Nozzles
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Mix Ratio	Consistency	Viscosity	Temp. Range	Color	For Joining	Cannot Be Sold To		Each		Each		Each
SciGrip Cement
4	4 fl. oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	000000	000000	000000	00	000000	00
4	16 fl. oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	000000	00000	000000	00	000000	00
4SC	4 fl. oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	000000	00000	000000	00	000000	00
4SC	16 fl. oz.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	000000	00000	000000	00	000000	00
4SC	1 gal.	Can	60 sec.	7 days	__	Thin Liquid	Not Rated	Not Rated	Clear	Plastic	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	00000000	000000	000000	00	000000	00
40	16 fl. oz.	Can	20 min.	7 days	20:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	000000	00000	000000	00	000000	00
40	1 gal.	Can	20 min.	7 days	20:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	000000	000000	00	000000	00
42	1.69 fl. oz.	Cartridge	15 min.	7 days	10:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	00000	0000000	0000000	00000000	00000
42	7.8 fl. oz.	Cartridge	15 min.	7 days	10:1	Thick Liquid	Not Rated	Not Rated	Clear	Plastic	__	00000000	00000	0000000	000000	000000000	0000

Cement for Abrasive Grains

Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.

Container
Size, gal.	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity	Temp. Range	Color	For Joining		Each
1	Pail	30 min.	24 hrs.	Thin Liquid	Not Rated	Not Rated	Brown	Fabric	000000	000000

Cement for Ceramic Insulation

For insulation joints on ovens and furnaces, this cement has excellent temperature resistance.

Container
Size, gal.	Type	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Max. Temp., °F	Color	For Joining		Each
1	Pail	15 sec.	90 min.	Thick Liquid	7,850	1000°	Off-White	Ceramic	000000000	000000

Pipe Cement for Corrosive Waste Plastic Pipe

Because this cement won't break down when exposed to corrosive waste, it's often used on plastic pipe fittings in laboratories.

Pipe Dia.
Min.	Max.	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range, °F	Color	Specifications Met	For Use On		Each
16 fl. oz.
1 1/2"	24"	60 min.	2 hrs.	Thick Liquid	1,600	40° to 110°	Yellow	ASTM F2618, ASTM F493, NSF/ANSI 14	CPVC Plastic	0000000	000000
32 fl. oz.
1 1/2"	24"	60 min.	2 hrs.	Thick Liquid	1,600	40° to 110°	Yellow	ASTM F2618, ASTM F493, NSF/ANSI 14	CPVC Plastic	0000000	000000

Pipe Cement for Plastic Pipe

Create strong, leakproof joints between unthreaded pipe and fittings. Cleaner and primer (sold separately) are recommended to prepare pipe for adhesion.

Cement for CPVC plastic and for PVC plastic meets NSF/ANSI 61 safety standards for use on drinking water systems. It is also suitable for drain, waste, and vent pipes.

Cement for ABS plastic is for use in drain, waste, and vent systems.

Cement for ABS, PVC, and CPVC plastic works on most plastic pipe, conduit, water lines, and drain, waste, and vent systems.

Cement cannot be sold to the areas listed due to VOC (Volatile Organic Compound) regulations.

For CPVC Plastic
For Max. Pipe Dia.	Begins to Harden	Reaches Full Strength	Consistency	Viscosity, cP	Temp. Range, °F	Color	Specifications Met	Cannot Be Sold To		8 fl. oz.	16 fl. oz.	32 fl. oz.
2"	60 sec.	12 hrs.	Thin Liquid	500	40° to 110°	Yellow	ASTM F493, NSF/ANSI 61	__	00000000	000000	00	000000
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Orange	ASTM F493, NSF/ANSI 61	__	00000000	00000	000000	00000
For PVC Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	00000000	0000	00000	00000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Clear	ASTM D2564, NSF/ANSI 61	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	00000000	00000	00000	00000
12"	60 sec.	24 hrs.	Thick Liquid	1,600	40° to 110°	Gray	ASTM D2564, NSF/ANSI 61	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA, Ventura County, CA	00000000	00000	00000	00000
For ABS Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Black	ASTM D2235	__	00000000	0000	00000	00000
For ABS, PVC, and CPVC Plastic
6"	60 sec.	24 hrs.	Thin Liquid	500	40° to 110°	Clear	__	__	00000000	00000	00000	00000

Cleaners and Primers for Pipe Cement

Cleaners
Color		8 fl. oz.	16 fl. oz.	32 fl. oz.
Clear	00000000	00000	000000	000000
Primers
Clear	00000000	0000	00000	00000
Purple	00000000	00000	00000	00000

Construction Adhesives for Wall Bases

Adhere vinyl and rubber wall bases to wood, drywall, and concrete with these water-resistant adhesives.

Container					Strength
Size	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
30 fl. oz.	Cartridge	90 ft. @ 1/4" bead	20 min.	72 hrs.	25	10	Paste	55° to 100°	Off-White	No	Masonry, Plastic, Rubber, Wood	0000000	000000

Construction Adhesives for Nosing

Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.

Container					Strength
Size, fl. oz.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Mix Ratio	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
32	Can	75 ft. @ 1/4" bead	45 min.	24 hrs.	Not Rated	Not Rated	1:1	Paste	70° to 80°	Beige	No	Masonry, Plastic, Rubber	00000000	000000

Construction Adhesives for Stair Treads

Install treads on concrete and wood stairs with this strong, water-resistant adhesive.

Container					Strength
Size, gal.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
1	Pail	150 sq. ft. @ 1/16" bead	15 min.	24 hrs.	Not Rated	Not Rated	Paste	55° to 85°	White	No	Masonry, Plastic, Rubber, Wood	00000000	000000

Construction Adhesives for Flooring

Bond carpeting, vinyl tile, and other floor coverings to subfloors with these water-resistant adhesives.

Container					Strength
Size	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
1 gal.	Pail	33 sq. ft. @ 1/8" bead	15 min.	24 hrs.	Not Rated	Not Rated	Thick Liquid	65° to 85°	Beige	No	Plastic, Wood	00000000	000000

Flexible Tube Dispensers

Extract all the contents from tubes of adhesives and sealants.

For Max. Tube Wd.	For Container Material	Material		Each
3"	Metal, Plastic	Plastic	00000000	00000