Use these buttons to support and position workpieces and fixtures from the bottom or side. Their hex shape lets you screw them into a threaded hole with a wrench or socket.

Make quick height adjustments by turning the threaded stud.

Replace worn screws or customize your clamps.

Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

The tip is narrow to pass through threaded holes.

A low-profile flat-faced ball tip allows these metric set screw to be used in low-clearance applications.

Alloy steel set screws dig into hard surfaces for a secure hold.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. They're available in metric sizes.

Choose these set screws for their adherence to strict military standards for material and construction.

More corrosion resistant than stainless steel, nickel alloy set screws have excellent resistance to salt water and some acids.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments.

Made from 18-8 stainless steel, these set screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These metric alloy steel set screws dig into hard surfaces for a secure hold. They have serrations on the cup edge that grip the material surface to resist loosening.

Made from 18-8 stainless steel, these set screws are chemical resistant. They have serrations on the cup edge that grip the material surface to resist loosening.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

Made from black-oxide alloy steel, these set screws resist corrosion in dry environments. They dig into hard surfaces for a secure hold and have serrations on the cup edge that grip the material surface to resist loosening.

These metric set screws are vented to allow fluid and gas to pass through.

Fine threads give you precise control.

These metric set screws have a rolling ball that swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Also known as full dog-point set screws, the tip is twice as long as the tip on other extended-tip set screws for greater engagement in deep mating holes.

A nylon locking patch grips threads to resist loosening.

These metric screws have a square head, so you can turn them by hand or use a wrench for more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. They're also known as dog-point set screws.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These 18-8 stainless steel set screws are chemical resistant. A pointed tip wedges into the contact surface for a secure hold on soft materials such as brass.

Available in metric sizes, these alloy steel set screws have an extra-soft nylon tip that minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

These chemical-resistant 18-8 stainless steel screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

These set screws have a softer tip than brass-tip set screws to minimize surface damage. Use them on hard surfaces.

These metric set screws have a brass tip, which is harder than nylon and silver, for a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

A nylon locking patch grips threads to resist loosening.

Secure gears, pulleys, and other objects that require frequent adjustments, even in wet environments.

These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Secure objects to flat surfaces in washdown and corrosive environments.

The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made of alloy steel, these set screws are often used in U-shaped and V-shaped grooves and on other sloped or angled surfaces. The oval tip allows for frequent adjustments with minimal surface damage.

Stainless steel set screws have excellent corrosion resistance in most environments.

Arms provide a flat surface to push your fingers against.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

A wide tip provides more gripping power than standard swivel-tip thumb screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

For maximum contact with angled and uneven surfaces, the tip swivels in all directions. The tip is narrow so it will fit through threaded holes.