Mounting Rods for Conveyors
Use brackets and connectors to create vertical and horizontal support arms.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor.
Stainless steel mounting rods are the most corrosion resistant.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Size | Lg. | Gender | Material | Includes | Each | ||
Hollow | |||||||||
| A | 18" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | Black Plastic End Cap | 00000000 | 000000 |
Solid | |||||||||
| A | 3" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 5" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 8" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 10" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 12" | 1/2" | 5/16"-18 | 5/8" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 15" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 24" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
Mounting Rods with Clamp for Conveyors
A clamp at the end of the rod grips conveyor guides or other rods. Mount rods with brackets and connectors to create support arms.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes.
Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor. Instead of using bolts, tighten the clamps on style F around a guide rail by twisting the rod into the clamp.
| Lg. | Rod Dia. | For Rod Dia. | For Number of Lines | Material | Clamp Material | Includes | Rod Shape | Each | ||
Hollow | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | 5 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 000000 |
| A | 7 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 00000 |
| A | 11 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 00000 |
Solid | ||||||||||
| A | 3" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| A | 9" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| A | 15" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| Lg. | Rod Dia. | For Channel Wd. | For Number of Lines | Material | Clamp Material | Includes | Each | ||
Hollow | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | 3 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 000000 |
| C | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| C | 7" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 7 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 11 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
Solid | |||||||||
| D | 3" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| D | 9" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| D | 15" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| F | 3" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 7" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 10" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| G | 4" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
| G | 6" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
| G | 8" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
Mounting Rods with Bracket Base for Conveyors
These rods have a bracket on the base so they're ready to mount.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor.
Style A and C rods stick out vertically from the bracket.
Bracket | Mounting Slot | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Wd. | Ht. | Material | Bracket Material | Mounting Fasteners Included | For Slot Wd. | Wd. | Ht. | Mounting Hole Dia. | Includes | Each | ||
Hollow | ||||||||||||||
| A | 4 1/2" | 1/2" | 2 3/8" | __ | Stainless Steel | Plastic | No | __ | __ | __ | 1/4" | __ | 00000000 | 000000 |
| A | 8" | 1/2" | 2 3/8" | __ | Stainless Steel | Plastic | No | __ | __ | __ | 1/4" | __ | 00000000 | 00000 |
Solid | ||||||||||||||
| C | 4" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
| C | 6" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
| C | 8" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
Graduated Mounting Rods for Conveyors
Graduated in 1/8" or 1 mm increments, these rods make it easy to align multiple brackets during installation.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod. Solid rods are sturdier than hollow rods, so they are less likely to be knocked out of place by heavy objects on your conveyor.
Thread | 1/2" Rod Dia. | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Graduation Marks (Numeric Increments) | Size | Lg. | Gender | Material | Each | |
Solid | |||||||
| 3" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 000000 |
| 5" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 8" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 10" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 12" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 15" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 18" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 24" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
Pivoting Mounting Rods for Conveyors
The pivoting joint on these rods makes angle mounting easy.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 000000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
Mounting Rods with Sensor Holder for Conveyors
Use the hole at the end of these rods to attach sensors and accessories without clamps. Mount rods with brackets and connectors to create vertical and horizontal support arms.
| Lg. | Rod Dia. | For Sensor OD | Material | Each | |
Solid | |||||
|---|---|---|---|---|---|
| 5" | 1/2" | 1/4" | Stainless Steel | 00000000 | 000000 |
Graduated Pivoting Mounting Rods for Conveyors
To make aligning multiple brackets during installation easy, these rods have 1/8” graduation marks. They also have a pivoting joint, so you can adjust the angle of your mount.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 000000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |