Flood Coolant Dispensers with Reservoir
These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.
Maximum flow rate and shut-off height are for water-soluble oil. Shut-off height is the maximum height to which the water-soluble oil can be pumped.
Nozzle | Reservoir | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Max. Flow Rate | Max. Pressure, psi | Coolant Outlet Hose Lg. | Lg. | Type | Nozzle Material | O'all Ht. | Wd. | Dp. | Reservoir Material | Shut-Off Ht., ft. | For Max. SSU Viscosity Grade | Voltage | Features | Each | ||
For Use With Coolant, Water | |||||||||||||||||
| A | 1 | 108 gph @ 1 ft. of head | 5 | 6 ft. | 6" | Rigid | Polyethylene Plastic | 9 3/8" | 12" | 6" | Polypropylene Plastic | 11.5 | 100 | 120V AC | Adjustable Flow, Coolant Strainer | 00000000 | 0000000 |
| B | 5 | 210 gph @ 1 ft. of head | 4.3 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 10.2 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
| B | 5 | 325 gph @ 1 ft. of head | 5.2 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 12.3 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
| B | 5 | 500 gph @ 1 ft. of head | 7.5 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 17.3 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
| C | 6 | 600 gph @ 1 ft. of head | 5.6 | 4 ft. | 15" | Flexible | Steel | 15" | 18" | 9 1/2" | Steel | 14 | 500 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 0000000 | 000000 |
| C | 10 | 600 gph @ 1 ft. of head | 5.6 | 4 ft. | 15" | Flexible | Steel | 16 1/2" | 24" | 9 3/4" | Steel | 14 | 500 | 120V AC | Adjustable Flow, Coolant Strainer, On/Off Valve | 0000000 | 000000 |
| D | 10 | 500 gph @ 1 ft. of head | 7.5 | 4 ft. | 12" | Flexible | Acetal Plastic | 12" | 25" | 10" | Steel | 17.3 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 00000000 |
Flood Coolant Dispensers
Draw coolant from your existing tank. Providing a constant flow of coolant, this flood dispenser dissipates heat more efficiently than mist and droplet dispensers, making it suitable for cooling long machine cycles. It has an any-which-way nozzle that stays in place once positioned. The mounting base is magnetic.
For technical drawings and 3-D models, click on a part number.
Nozzle | Dispensing Tips | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate @ Pressure | Flow On/Off Mechanism | Max. Pressure | Lg. | Type | Material | Bend Radius | No. of | Orifice Dia. | Material | For Max. SSU Viscosity Grade | Each | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||
| 90 gpm @ 50 psi | Handle | 50 psi | 8" | Flexible | Acetal Plastic | 2" | 3 | 1/16", 1/8", 1/4" | Acetal Plastic | Not Rated | 0000000 | 000000 |
Mist Coolant Dispensers with Reservoir
These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.
Styles E and F have any-which-way nozzles that stay in place once positioned.
Use the optional on/off air switch with styles D and E. Install in the air supply line to save energy.
Coolant Outlet | Nozzle | Reservoir | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap. | Flow Rate @ Pressure | Max. Pressure, psi | No. of | Hose Lg. | Hose Material | Lg. | Type | Nozzle Material | O'all Ht. | Wd. | Dp. | Dia. | Reservoir Material | For Max. SSU Viscosity Grade | Air Inlet Pressure, psi | Each | |
For Use With Coolant, Water | ||||||||||||||||||
| A | 32 fl. oz. | 0.1 gph @ 100 psi | 100 | 1 | 5 ft. | Polyurethane Rubber | 6" | Rigid | Brass | 8 1/2" | 5 1/4" | 4" | __ | Polyethylene Plastic | 35 | 50-100 | 0000000 | 0000000 |
| B | 32 fl. oz. | 0.1 gph @ 100 psi | 100 | 1 | 5 ft. | Brass | 6" | Rigid | Brass | 8 1/2" | 5 1/4" | 4" | __ | Polyethylene Plastic | 35 | 50-100 | 0000000 | 000000 |
| C | 1 gal. | 0.2 gph @ 100 psi | 100 | 1 | 5 ft. | Brass | 6" | Rigid | Brass | 12 1/4" | 10" | 5 1/4" | __ | Polyethylene Plastic | 35 | 50-100 | 0000000 | 000000 |
| C | 1 gal. | 0.3 gph @ 100 psi | 100 | 2 | 5 ft. | Brass | 6" | Rigid | Brass | 12 1/4" | 10" | 5 1/4" | __ | Polyethylene Plastic | 35 | 50-100 | 0000000 | 000000 |
| D | 1 gal. | 6 gph @ 125 psi | 125 | 1 | 4 ft. | Nylon Plastic | 6" | Rigid | Brass | 10 3/4" | 7 3/4" | 3 1/2" | __ | Stainless Steel | Not Rated | 30-120 | 0000000 | 000000 |
| D | 1 gal. | 6 gph @ 125 psi | 125 | 2 | 4 ft. | Nylon Plastic | 6" | Rigid | Brass | 10 3/4" | 7 3/4" | 3 1/2" | __ | Stainless Steel | Not Rated | 30-120 | 0000000 | 000000 |
| D | 3 gal. | 6 gph @ 125 psi | 125 | 2 | 4 ft. | Nylon Plastic | 6" | Rigid | Brass | 13 3/4" | 8 5/8" | 6" | __ | Stainless Steel | Not Rated | 30-120 | 0000000 | 000000 |
| E | 1 gal. | 6 gph @ 125 psi | 125 | 1 | 4 ft. | Nylon Plastic | 12" | Flexible | Acetal Plastic | 10 3/4" | 7 3/4" | 3 1/2" | __ | Stainless Steel | Not Rated | 30-120 | 0000000 | 000000 |
For Use With Coolant, Water, Cutting Oil | ||||||||||||||||||
| F | 1 gal. | Not Rated | 120 | 1 | 4 ft. | Polyethylene Plastic | 12" | Flexible | PVC Plastic | 12" | __ | __ | 7" | Steel | 30 | 30-125 | 0000000 | 000000 |
| F | 1 gal. | Not Rated | 120 | 2 | 4 ft. | Polyethylene Plastic | 12" | Flexible | PVC Plastic | 12" | __ | __ | 7" | Steel | 30 | 30-125 | 0000000 | 000000 |
| G | 2 gal. | Not Rated | 120 | 1 | 4 ft. | Polyethylene Plastic | 3" | Rigid | PVC Plastic | 10" | 10" | 6" | __ | Steel | 30 | 30-125 | 000000 | 000000 |
| G | 2 gal. | Not Rated | 120 | 2 | 4 ft. | Polyethylene Plastic | 3" | Rigid | PVC Plastic | 10" | 10" | 6" | __ | Steel | 30 | 30-125 | 000000 | 000000 |
| G | 2 gal. | Not Rated | 120 | 4 | 4 ft. | Polyethylene Plastic | 3" | Rigid | PVC Plastic | 10" | 10" | 6" | __ | Steel | 30 | 30-125 | 000000 | 000000 |
| On/Off Air Switch for Styles D and E | 0000000 | Each | 000000 |
| For Style | Component | Each | |
| A | 5-ft. Polyurethane Rubber Outlet Hose | 00000000 | 000000 |
| A, B | Liquid-Level Gauge | 0000000 | 00000 |
| A, B, C | 6" 45°-Angle Brass Nozzle | 00000000 | 00000 |
| A, B, C | 6" 90°-Angle Brass Nozzle | 00000000 | 00000 |
| A, B, C | 6" Straight Brass Nozzle | 00000000 | 00000 |
| B, C | 5-ft. Brass Outlet Hose | 00000000 | 000000 |
| C | Sight Gauge | 0000000 | 00000 |
| D | 4-ft. Nylon Plastic Outlet Hose with 45°-Angle Brass Nozzle | 0000000 | 00000 |
| D | Magnetic Nozzle Mount | 0000000 | 00000 |
| D, E | Coolant Inlet Hose | 0000000 | 00000 |
| D, E | Coolant Inlet Hose Ball Check | 0000000 | 00000 |
| D, E | Valve Block | 0000000 | 00000 |
| D, E | Valve Stem | 0000000 | 00000 |
| E | 1 1/4" Brass Dispensing Tip | 0000000 | 00000 |
| E | 4-ft. Nylon Plastic Outlet Hose with Any-Which-Way Plastic Nozzle | 0000000 | 000000 |
| F | 12" Any-Which-Way Plastic Nozzle with Base | 0000000 | 00000 |
| F | 4-ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid | 000000 | 00000 |
| F | 5-ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid | 0000000 | 00000 |
| F, G | 1/16" Brass Tube Fitting for Steel | 0000000 | 00000 |
| F, G | Air-Control Assembly | 0000000 | 00000 |
| F, G | Coolant Inlet Hose | 0000000 | 00000 |
| F, G | Liquid-Control Assembly | 0000000 | 00000 |
| G | 3" 45°-Angle Rigid Stainless Steel Nozzle | 0000000 | 00000 |
| G | 3" Straight Rigid Stainless Steel Nozzle | 000000 | 00000 |
| G | 4-ft. Polyethylene Plastic Outlet Hose | 000000 | 00000 |
| G | 5-ft. Polyethylene Plastic Outlet Hose | 0000000 | 00000 |
| G | Magnetic Nozzle Mount | 000000 | 00000 |
Mist Coolant Dispensers
Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.
Style A can be used with a magnetic nozzle mount (sold separately).
Styles B and C come with a magnetic base. They have any-which-way nozzles that stay in place once positioned. Style C has separate air and liquid controls and a built-in regulator for accurate mixing.
Coolant Outlet | Nozzle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Flow Rate @ Pressure | Max. Pressure, psi | No. of | Hose Lg. | Lg. | Type | Nozzle Material | Bend Radius | Air Inlet Pressure, psi | Coolant Inlet Hose Lg. | For Max. SSU Viscosity Grade | Includes | Each | |
For Use With Coolant, Water | ||||||||||||||
| A | 6 gph @ 125 psi | 125 | 1 | 2 ft. | 4" | Rigid | Brass | __ | 30-120 | 4 ft. | Not Rated | __ | 0000000 | 0000000 |
| B | 0.3 gph @ 100 psi | 100 | 1 | __ | 7" | Flexible | Acetal Plastic | 1 1/4" | 50-100 | 7 ft. | 35 | __ | 0000000 | 000000 |
For Use With Coolant, Water, Cutting Oil | ||||||||||||||
| C | 105 gph @ 30 psi | 30 | 1 | __ | 13" | Flexible | Polypropylene Plastic | 1" | 10-50 | 10 ft. | Not Rated | Quick-Disconnect Fitting for Air Inlet | 00000000 | 000000 |
Mist Coolant/Air Dispensers
Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
Dispensers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Dispensing Tip | Coolant Inlet Hose | Replacement Nozzles | |||||||||||
| Lg. | Type | Material | Mount Type | Bend Radius | Lg | Material | Spray Type | Air Inlet Pressure, psi | Lg., ft. | Material | Each | Each | ||
For Use With Air, Coolant, Water | ||||||||||||||
| 12" | Flexible | Plastic | Magnetic | 3/4" | 1 1/4" | Brass | Medium | 85-125 | 4 | Vinyl Plastic | 0000000 | 0000000 | 0000000 | 000000 |
| 18" | Flexible | Plastic | Magnetic | 3/4" | 1 1/4" | Brass | Medium | 85-125 | 4 | Vinyl Plastic | 0000000 | 000000 | 0000000 | 000000 |
Droplet Coolant Dispensers
Deliver a small, controlled amount of coolant to a workpiece. Turn the knobs to set the air flow and the number of droplets per minute for each coolant stream. Dispenser has two any-which-way nozzles that stay in place once positioned. Each nozzle has a magnetic base.
Note: Dispenser is only for use with synthetic- and vegetable-based coolants (sold separately).
Mounting kit (sold separately) is magnetic, so it’s easy to move the system from one machine to another.
For technical drawings and 3-D models, click on a part number.
Nozzle | O'all | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., fl. oz. | Droplets per Minute | Max. Pressure, psi | Coolant Outlet Hose Lg. | Lg. | Type | Nozzle Material | Bend Radius | Ht. | Wd. | Dp. | Reservoir Material | For Max. SSU Viscosity Grade | Air Inlet Pressure, psi | Voltage | Each | |
For Use With Coolant | ||||||||||||||||
| 16 | 2-16 | 125 | 6 ft. | 18" | Flexible | Acetal Plastic | 1 3/4" | 7 1/16" | 10 1/16" | 7 1/16" | Polyethylene Plastic | 200 | 60-125 | 120V AC | 00000000 | 000000000 |
Chemical Hose Nozzles with Hose and Threaded Fittings
Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.
Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.
Aluminum nozzles resist wear and tear better than polypropylene nozzles.
Spout | Hose | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Pipe Size | Pipe Connection | Max. Pressure | Temp. Range, °F | OD | Lg. | Fitting Material | Shut-Off Type | ID | OD | Bend Radius | Lg., ft. | Material | Includes | Each | |
Polypropylene Plastic Nozzles | ||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Phosphoric Acid, Potassium Hydroxide, Vegetable Oil | ||||||||||||||||
| 8 | 2 | Threaded NPT Female | 150 psi @ 72° F | 25° to 150° | 1 1/8" | 5" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 0000000 |
Aluminum Nozzles | ||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits | ||||||||||||||||
| 10 | 2 | Threaded NPT Female | 150 psi @ 72° F | 25° to 150° | 1" | 6" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 000000 |