Soak these bandanas before wearing them—they’ll cool you off as the water evaporates.

Cotton bandanas contain absorbent cooling crystals to hold large amounts of water. Soak in cold water for 20 minutes for all-day cooling.

Run polyester/spandex bandanas under cold water and wring them out for instant cooling that lasts up to three hours. With UPF 50 sun protection, they protect your skin from UV rays when working outside. An odor-resistant finish prevents bacteria growth, eliminating odors caused by sweat. Reflective accents call attention to the wearer in low-light conditions, helping keep them safe. They have a low profile so they’re easily worn under hard hats. The polyester/spandex fabric is durable for long-term use while remaining soft and comfortable. It’s breathable to keep you cool, and easy to breathe through when used as a face covering. These bandanas are moisture wicking when dry, helping keep sweat out of your eyes when worn as a headband. High visibility bandanas come in neon colors, helping prevent accidents by making wearers easy to spot.

Drape or wrap towels around your body to cool you down. Run under cold water for 2-5 minutes, and towels stay cool for up to 4 hours. Made of lightweight PVA, these towels feel like soft felt.

Stay safe when it’s hot—these vests cool down your core to protect you in extreme heat.

Style A vests soak up water that slowly evaporates to keep you cool for up to four hours. Soak them in cold water for a few minutes, and polymer crystals in the fabric will absorb large amounts of water. As you move, airflow creates a cool, damp sensation to lower your body temperature. Lightweight and flexible, these vests are made of nylon, with a mesh bottom to help with ventilation.

Style B vests hold water in a reservoir, which slowly evaporates to cool you down. Though they don't get as cold as other options, they last much longer, keeping you cool all day. Plus, you'll only need to refill the reservoir every three days. The most durable option, they have a rigid polyurethane shell, with a nylon liner for comfort. These vests have elastic hook and loop straps, making them the most adjustable style.

Style C vests have cooling packs that stay at 64° F for up to two hours. They don’t require airflow to cool you down, so you can wear them indoors as well as outdoors. Rechill the cooling packs in a freezer, fridge, or even in front of an air conditioner. To keep cool for longer, keep replacement cooling packs on hand.

Keep cool and be seen—these vests protect you from the heat and help you stand out when visibility is low. They meet ANSI/ISEA 107, so they've passed tests for visibility at high speeds and distances. That means you'll be seen by fast-moving vehicles or from across the shop floor.

Style A vests hold water that slowly evaporates to keep you cool for up to four hours. Soak them in cold water for a few minutes, and polymer crystals in the fabric will absorb large amounts of water. As you move, airflow creates a cool, damp sensation to lower your body temperature. A polyester/nylon shell won’t weigh you down, and a mesh bottom helps with ventilation.

Style B vests hold cooling packs that stay at 58° F for up to three hours. You can use these both indoors and outdoors as they don’t require airflow to cool you down. Their polyester exterior helps keep water out while a cotton liner has a thermal layer to keep you cool. They come with an insulated cooler bag to keep packs cold before use. To keep cool for longer, keep replacement cooling packs on hand.

Shield your forehead from the sun’s harsh glare—these headbands are rated UPF 50 to block 98% of UV rays. They’re slim enough to wear under headgear, yet durable for frequent use. Made of a polyester/spandex fabric blend, they’re breathable to keep you cool. You can run them under cold water and wring them out for direct cooling that lasts up to two hours. The fabric also wicks away moisture and dispels odor caused by lingering sweat.

These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms from electrical arc flashes and flames. Choose shirts that meet the arc rated category for your workplace. The higher the arc rating, the greater the flame resistance. These shirts are arc fire protection rated Category 2, the most common rating for industrial applications. Since they’re made of breathable and moisture-wicking materials, you stay cool. They have buttons down the front and on the cuffs, as well as two chest pockets.

When measuring chest size, measure around the fullest part of your chest.

Shirts with mesh vents allow cool air in as your shift your shoulders. The vents are hidden on the upper back.

Keep cool while staying shielded from flame and electrical hazards. These gaiters meet NFPA 70E standards for protection against flames and arc flashes. Made from flame-resistant fabric, these gaiters defend against radiant heat and sparks while remaining soft and comfortable. They wick moisture from your head and neck to keep you cool and are easy to breath through when worn as a face covering. With UPF 50 sun protection, they block 98% of UV rays from reaching your skin. An odor-resistant treatment prevents bacteria growth, eliminating odors caused by sweat.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating. These gaiters meet Category 1, the lowest level of arc-rated PPE.

Absorb sweat and stay cool by wearing these bandanas around your head or neck. They meet NFPA 70E and ASTM F1506 standards, so they’re safe to wear when sparks are flying. To keep you cool, they contain water-absorbing crystals. Run these bandanas under cold water for a few minutes, then the crystals will relieve heat through evaporation for up to 4 hours. They're made of a soft, breathable cotton and modacrylic blend that resists flames and protects against radiant heat.

Keep sweat out of your eyes with these breathable cotton hats. All are machine washable.

When measuring head circumference, measure just above your ear, where the hat will rest. If you are between sizes, order one size up.

Bandanas are large enough to tie over your head and hair if caps and beanies won’t fit. Made from a blend of PVA and cotton, they’re better for cooling than cotton alone. Soak them before you tie them on, and the water will cool you off as it evaporates.

Stay cool and protect your head—a reflective barrier in these hard hats lowers the temperature by 20 degrees. A full brim runs around the hat to shield your head and neck from sun, rain, and glare. It offers 12% more coverage than the brim on a standard full brim hat, providing additional protection from the elements. A built-in sweatband keeps perspiration out of your eyes, even if you sweat.

Type I hard hats protect against blows to the top of the head only. A foam shell absorbs impact, reducing force on the neck and head. To fit the hard hat snugly to your head, turn a knob on the back that tightens the suspension. The reversible suspension lets you turn the hat around without taking it off. For example, spin the hat to move a face shield out of the way or turn the hat to fit in a tight space. You can also add attachments such as face shields or earmuffs to the mounting slots on the hat.

Class C hard hats have not been tested for electrical protection. Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts.

Hard hats with ventilation holes add another way to stay cool by letting air circulate.