Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

Draw coolant from your existing tank.

Draw coolant from your existing tank.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.

Choose a base, hose, and nozzle for a custom setup.

These nozzles are made of FDA-listed materials.

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

Extend these telescoping nozzles to increase your reach.

Focus air with pinpoint precision.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Kits include one vortex tube for converting compressed air into a stream of cold air as well as airflow adjusters, a cold-air muffler, a tube fitting, and tubing.