We will reply to your message within an hour.
More
These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.
Flexible enough for small bundles, these ties are often used for electronics.
Take the guesswork out of identifying material—use the attached tag to label the bundle.
Easily open and cinch closed parallel bundles.
These ties meet UL flammability requirements.
A textured tab on the end makes these cable ties easy to yank open and cinch shut, even when wearing gloves.
The buckle allows you to cinch these ties tight.
Bundle cables outdoors with these ties that withstand exposure to UV rays and water.
The hook and loop on these ties holds more tightly than other hook and loop.
These ties stretch to hold material tightly without slipping.
Ties are made from heat-resistant fabric to withstand high temperatures.
These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.
Create custom-length ties from a roll with hook on one side and loop on the other.
Able to fit small bundles, these thin ties are more flexible than other ties.
Create a cable tie with a buckle—no sewing required.
Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.
Quickly attach and detach a bundle.
Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.
Secure a bundle and then use the grommet to temporarily hang it from a hook or peg.
Stick these ties to any smooth, clean surface.
Mount bundles to surfaces with a screw or fastener. Since the mounting grommet on these ties is not accessible after material has been bundled, these ties are best for a permanent installation.
Add a hook and loop cable tie to these mounts to secure a bundle.
Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.
Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.
Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.
Mount to a surface and add a cable tie to secure a bundle.
For use in environments subjected to chemicals, these mounts withstand the most corrosive conditions.
With a perforated base, you can stick these mounts to a variety of uneven, curved, and angled surfaces to secure bundles.
These mounts meet UL flammability requirements.
Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.
Often used to secure vertical running material, these mounts maintain space between a bundle and a surface.
Attach these cable ties directly to a surface—no separate mount needed.
Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.
The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.
These ties are less likely to crack and break from dryness than regular cable ties.
Use the built-in blade to remove excess length once these ties are secure.
Remove these cable ties with ease.
Bundle items in areas, such as food plants, where the detection and retrieval of dropped or broken ties is essential. All of these ties are reusable and have a release tab for easy removal.
The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.
For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.
The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.
These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.
Secure and separate parallel bundles with the same tie.
Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.
Bundle and secure cable, wire, and hose.
These strong, wide ties are often used as an alternative to metal strapping.
Protect sensitive electronic equipment from static buildup.
Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.
These cable ties come with a material certificate with traceable lot number and product shelf life.
With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.
Identify bundles at a glance.
Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.
A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.
Create custom-length cable ties for large bundles and heavy materials.
Keep an assortment of cable ties on hand.
A hard rubber coating and wire core helps these ties maintain their shape.
Formed to the shape of a round bundle, these ties close with a single twist of the top.
Ties come on a spool for use in a twist tie machine.
Create custom-length ties for bundling delicate materials.
Secure large bundles such as lumber, cardboard, and wire coils.
These ties have a loop on each end that can be twisted around each other for a secure closure.
Bundle, close, and label bags and sacks.
Create strong and durable custom-length ties with a hard rubber coating and wire core.
The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.
Mount to a surface to secure and route cable.
Add push-in cable holder to this adapter to mount cable to DIN rail.
Keep an assortment of large and small cable holders on hand for holding and routing cable across your surface.
Secure multiple cable bundles with a single holder.
Grip delicate cables with these holders.
These mounts create space between a bundle and surface.
Quickly organize bundles of up to 24 data cables over long runs often used in cable ladders and trays.
These stretchy ties conform to irregularly shaped bundles to grip material tightly.
The evenly spaced ball-shaped beads allow you to adapt to changes in bundle size.
These ties are wide and flat for a no-slip grip.
Use in light duty applications such as tagging and attaching documentation to equipment.
Mount to a surface and add a beaded cable tie to secure a bundle.
Secure and separate two bundles with the same tie.
Thread the end through one of the perforations to secure.
For use in the harshest environments, these ties withstand chemicals and UV rays.
Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.
Use these mounts with stainless steel cable ties when working in corrosive environments.
The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.
Stamp or emboss these ties to identify material.
The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.
Wrap these ties through tags.
Tear off 6", 8", or 12" lengths of this hook and loop.
Cut to wrap around any size bundle.
This hook and loop meets FMVSS 302 and UL 94 V-2 for flame retardance.
Stretch this elastic loop over objects for a secure hold.
This hook and loop meets standards for flame retardance.
Cover surfaces up to 60" wide.
A rigid vinyl backing gives this hook and loop stability.
Mushroom-shaped heads interlock for a secure hold when two pieces are pressed together.
A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.
Both the hook and the loop meet MIL-A-A-55126.
Each connector on this hook has two gripping heads for super-strong holding power.
Resistant to water and UV light, this hook and loop stands up to outdoor use.
Use the center hole to screw, nail, or rivet these discs to a surface.
The extra-strong adhesive on the back of this hook and loop sticks where others won't.
A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.
Woven from Nomex and flexible stainless steel yarn, this hook and loop withstands temperatures up to 800° F.
These convenient squares and discs have an adhesive backing.
When two parallel strips are pressed together, these fasteners are about one-third to one-half the thickness of other snap-together fasteners.
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.
Secure and insulate round signal wire such as data and communication wire.
These curved staples snuggly hold round signal wire such as coaxial cable and telephone wire.
Use these flat staples to secure romex cable.