McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Corner-Rounding Router Bits

    Choose from bits that form a variety of shapes along the edges of your workpiece.
    Uncoated Carbide-Tipped Steel
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Rounded Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Bullnose Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Rounded with Beading Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Bullnose with Beading Corner Style.

    Rounded Corner Style

    Bullnose Corner Style

    Rounded with Beading

    Corner Style

    Bullnose with Beading

    Corner Style

    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Cove Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Wavy Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Roman Ogee Corner Style.

    Cove Corner Style

    Wavy Corner Style

    Roman Ogee Corner

    Style

    Carbide-tipped steel bits are for use on wood.
    Ball Bearing—Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.
    Cutting
    Dia.
    Cut
    Radius
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    Bead
    Radius
    For Tool Type
    For Use On
    Each
    Rounded Corner Style
     
    Straight Flutes
    5/8"1/16"5/16"1/4"1 3/4"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood00000000000000
    3/4"1/8"3/8"1/4"2 1/8"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    13/16"5/32"15/32"1/4"2 3/32"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    7/8"3/16"1/2"1/4"2"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1"1/4"7/16"1/4"1 29/32"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/4"3/8"5/8"1/4"2 1/32"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/2"1/2"3/4"1/4"2 5/32"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/2"1/2"3/4"1/2"2 11/16"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 3/4"5/16"9/16"1/4"2 1/4"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    2"3/4"1 1/32"1/2"3"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Bullnose Corner Style
     
    Straight Flutes
    19/32"—1/2"1/2"2"——2—Hand Router, Router TableWood, Particleboard, Plywood000000000000
    7/8"—3/4"1/2"2 1/4"——2—Hand Router, Router TableWood, Particleboard, Plywood000000000000
     
    Rounded with Beading Corner Style
     
    Straight Flutes
    5/8"1/16"5/16"1/4"1 3/4"Ball Bearing3/8"21/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    7/8"3/16"1/2"1/4"2"Ball Bearing3/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1"1/4"7/16"1/4"1 29/32"Ball Bearing3/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/4"3/8"23/32"1/4"2 3/8"Ball Bearing3/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/2"1/2"13/16"1/4"2 13/32"Ball Bearing3/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Bullnose with Beading Corner Style
     
    Straight Flutes
    7/8"1/8"9/16"1/4"2 1/8"Ball Bearing1/2"21/8"Hand Router, Router TableWood, Particleboard, Plywood000000000000
    1 1/8"3/16"11/16"1/4"2 1/4"Ball Bearing5/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood000000000000
    1 1/4"1/4"3/4"1/4"2 5/16"Ball Bearing5/8"21/4"Hand Router, Router TableWood, Particleboard, Plywood000000000000
     
    Cove Corner Style
     
    Straight Flutes
    7/8"1/4"9/16"1/4"2"Ball Bearing3/8"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 1/8"3/8"9/16"1/4"2"Ball Bearing3/8"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
    1 3/8"1/2"5/8"1/4"2 1/8"Ball Bearing3/8"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Wavy Corner Style
     
    Straight Flutes
    1 1/4"—5/8"1/4"2 1/4"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Roman Ogee Corner Style
     
    Straight Flutes
    1 1/8"5/32"9/16"1/4"2"Ball Bearing3/8"2—Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Uncoated Carbide
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide, Rounded Corner Style.

    Rounded Corner Style

    Use solid carbide bits to round off sharp edges on plastic sheets. Their extreme hardness makes them brittle, so they’re not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.
    Cutting
    Dia.
    Cut
    Radius
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool
    Type
    For Use On
    Each
    Rounded Corner Style
     
    Straight Flutes
    1/4"1/8"3/8"1/4"2 1/2"1CNC MachineHard Plastic, Soft Plastic0000000000000
    1/4"3/16"3/8"1/4"2 1/2"1CNC MachineHard Plastic, Soft Plastic000000000000
    1/4"1/4"3/8"1/4"2 1/2"1CNC MachineHard Plastic, Soft Plastic000000000000
     

    Router Bit Sets

    Image of ProductInUse. Chamfering Cut Style. Front orientation. Chamfering Cut Style. Router Bit Sets.
    Image of ProductInUse. Corner Cut Style. Front orientation. Corner-Rounding Cut Style. Router Bit Sets.
    Image of ProductInUse. Square Cut Style. Front orientation. Square Cut Style. Router Bit Sets.
    Image of ProductInUse. Flush-Trimming Cut Style. Front orientation. Flush-Trimming Cut Style. Router Bit Sets.

    Chamfering Cut Style

    Corner Cut Style

    Square Cut Style

    Flush-Trimming Cut

    Style

    Image of ProductInUse. Groove Cut Style. Front orientation. Groove Cut Style. Router Bit Sets.
    Image of ProductInUse. Hinge Mortise Cut Style. Front orientation. Hinge-Mortise Cut Style. Router Bit Sets.
    Image of ProductInUse. Joining Cut Style. Front orientation. Joining Cut Style. Router Bit Sets.
    Image of ProductInUse. Panel Pilot Cut Style. Front orientation. Panel-Pilot Cut Style. Router Bit Sets.

    Groove Cut Style

    Hinge Mortise Cut Style

    Joining Cut Style

    Panel Pilot Cut Style

    Image of Product. Front orientation. Router Bits. Router Bit Sets.
    Keep a variety of router bits on hand to cut grooves, chamfers, and other detailed shapes into wood and plastic. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
    Flush-Trimming Cut Style—Flush-trimming bits cut layers of material flush to one another or make cuts along a template.
    Hinge-Mortise Cut Style—Hinge-mortise bits create large, shallow recesses.
    Joining Cut Style—Joining bits create shapes that fit together in order to form joints.
    Panel-Pilot Cut Style—Panel-pilot bits have a pointed tip that creates starter holes for efficient plunge cutting in wood. To make precise cutouts, use the top of the tip as a pilot and guide the bit along a template placed below the workpiece.
    No. of
    Pieces
    Cut Style
    Includes
    Shank
    Dia.
    For Tool Type
    For Use On
    Each
    Uncoated Carbide-Tipped High-Speed Steel
     
    Multipurpose
    6Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Joining    		One Chamfer Router Bit: 1-5/16" Cutting Diameter
    One Flush-Trimming Router Bit: 3/8" Cutting Diameter
    One Dovetail Router Bit: 1/2" Cutting Diameter
    One Rounded-Corner Bit: 1/4" Cutting Diameter
    Two Square Router Bits: 1/4" and 1/2" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite000000000000000
    10Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Hinge Mortise
    Joining    		One Chamfer Router Bit: 1-5/16" Cutting Diameter
    Two Rounded-Corner Bits: 1/4" and 3/8" Cutting Diameters
    One Flush-Trimming Router Bit: 1/2" Cutting Diameter
    One Rounded-Groove Router Bit: 1/4" Cutting Diameter
    One V-Groove Router Bit: 9/16" Cutting Diameter
    One Hinge-Mortise Router Bit: 1/2" Cutting Diameter
    One Dovetail Router Bit: 1/2" Cutting Diameter
    Two Square Router Bits: 1/4" and 3/4" Cutting Diameters    		1/2"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
    15Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Joining    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    One Cove Router Bit: 3/8" Cutting Diameter
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    One V-Groove Router Bit: 5/8" Cutting Diameter
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Roman Ogee Router Bit: 5/32" Cutting Diameter
    One Slotting Router Bit: 1-1/4" Cutting Diameter
    One Tongue-and-Groove Router Bit: 1-1/4" Cutting Diameter
    Three Square Router Bits: 1/4", 1/2", and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
    30Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Hinge Mortise
    Joining
    Panel Pilot    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    One Beaded-Corner Router Bit: 1-1/16" Cutting Diameter
    One Wavy-Corner Router Bit: 1-1/4" Cutting Diameter
    Five Rounded-Corner Router Bits: 1/8", 1/4", 5/16", 3/8", and 1/2" Cutting Diameters
    Two Cove Router Bits: 7/8" and 1-1/8" Cutting Diameters
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Hinge-Mortise Router Bit: 1/2" Cutting Diameter
    One Panel-Pilot Router Bit: 5/16" Cutting Diameter
    Three Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    Two Rabbet Router Bits: 1-1/4" Cutting Diameter
    Two Rounded-Groove Router Bits: 1/2" and 3/4" Cutting Diameters
    Two V-Groove Router Bits: 5/8" Cutting Diameter
    Seven Square Router Bits: 5/32", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
     
    Trimming, Edging
    6Chamfering
    Corner Rounding
    Flush Trimming    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite0000000000000
     
    back to top