Corrosion-Inhibiting Press-to-Close Bags

These bags contain a corrosion inhibitor to shield ferrous and nonferrous metals from corrosion.
Note: One mil equals 0.001".
Wd. | Ht. | Thick., mil | Clarity | Color | Material | Pkg. Qty. | Pkg. | |
4" | 6" | 4 | Semi-Clear | Blue | Polyethylene Plastic | 100 | 00000000 | 000000 |
6" | 8" | 4 | Semi-Clear | Blue | Polyethylene Plastic | 100 | 00000000 | 00000 |
8" | 10" | 4 | Semi-Clear | Blue | Polyethylene Plastic | 100 | 00000000 | 00000 |
9" | 12" | 4 | Semi-Clear | Blue | Polyethylene Plastic | 100 | 00000000 | 00000 |
12" | 18" | 4 | Semi-Clear | Blue | Polyethylene Plastic | 100 | 00000000 | 000000 |
Corrosion-Inhibiting Heat-Shrink Plastic Bags

Shield metal from corrosion and block out damaging UV light. Bags have a hook-and-loop closure and shrink when heated for skin-tight barrier around material.
Note: One mil equals 0.001".
Corrosion-Inhibiting Packs

Toss these packs into your shipping box to stop metals from corroding, oxidizing, tarnishing, and discoloring. These packs emit vapors that are absorbed by metal surfaces, creating a protective barrier. They're also known as volatile corrosion inhibitor (VCI) vapor packs.
For Area, cu. ft. | Width | Length | Bag Material | Temperature Range, ° F | Useful Life | For Use With | Pkg. Qty. | Pkg. | |
3 | 2" | 2 3/4" | Tyvek | 20° to 95° | 24 months | Aluminum, Brass, Carbon Steel, Copper, Galvanized Steel, Silicon Steel, Silver, Solder, Stainless Steel | 5 | 0000000 | 00000 |
UV-Resistant Corrosion-Inhibiting Heavy Duty Heat-Shrink Film

Shield shipments of metal equipment that could be exposed to the outdoors for long periods of time. This film is treated to prevent fading and degrading in the sun, while a built-in inhibitor guards the contents underneath from rain, snow, and humidity. It’s often used in place of oils and desiccants that prevent rust, so you don’t need to clean or degrease your equipment before covering it. Shrink the film with a heat gun to create a formfitting barrier that keeps out moisture and dirt.
At least six times thicker than standard heat-shrink film, you can drag and shrink this film over corners of equipment without it tearing. It’s large enough to cover forklifts, industrial compressors, or even a boat, but it’s easy enough to trim down using a utility knife. This film comes folded on a roll for efficient storage.
Clear film makes it easy to identify and check on covered equipment. It meets ASTM standards for plastic film.
Note: One mil equals 0.001”.
Wd., ft. | Thick., mil | Lg., ft. | Roll Wd. | Dia. | Core ID | Clarity | Color | Shrink Temperature, °F | Useful Life | Specifications Met | Each | |
LDPE Plastic | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
20 | 10 | 100 | 60" | 9" | 3" | Clear | Blue | 260° | 2 years | ASTM D1709, ASTM D1922, ASTM D6988, ASTM D882 | 0000000 | 0000000 |
Corrosion-Inhibiting Bubble Shipping Envelopes

A chemical additive in these envelopes shields carbon steel, aluminum, brass, and other metal parts from corrosion during shipping or storage. Also known as volatile corrosion inhibiting (VCI) envelopes. Close them with the adhesive strip.
Corrosion-Inhibiting Extra-Large Protective Bags


A chemical additive in these bags shields metals from corrosion by emitting a vapor that forms a protective barrier. Use them as a cover or liner to protect against dust, dirt, and moisture. Also known as gusseted bags, these bags expand when opened just like a paper lunch bag. Made from durable 4 mil thick plastic, these bags resist tearing—even when stretched over sharp edges or irregular shapes.
To pick the right size, add up the width and depth of your object, then do the same for your bag. Your object’s combined dimensions should be at least two inches smaller than your bag’s. To use the bag as a liner, plan for an extra four inches on top to fold the bag over your container’s sides.