About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Light Duty Track Rollers and Guide Rails
Nylon rollers and aluminum rails make these good for light duty applications. Mount along a wall or other vertical surface.
Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They're often used alongside rollers with a standard shoulder to correct misalignment.
Nylon Plastic Track Rollers | Anodized Aluminum Guide Rails | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size  | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Adjustable Shoulder | |||||||||||||||||
| 0.79" | 5 | 0.58" | 0.25" | 0.43" | 0.12" | 0.032" | 5 | 0.21" | M5 | 0.8 | 0.21" | 155° | 000000000 | 000000 | 00000000 | 000000 | |
| 1.02" | 10 | 0.77" | 0.31" | 0.47" | 0.13" | 0.033" | 6 | 0.23" | M6 | 1 | 0.23" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
| 1.58" | 15 | 1.21" | 0.44" | 0.55" | 0.16" | 0.038" | 8 | 0.34" | M8 | 1.25 | 0.34" | 155° | 000000000 | 00000 | 00000000 | 00000 | |
Corrosion-Resistant Track Rollers and Guide Rails
Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails. Mount along a wall or other vertical surface.
Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They’re often used alongside rollers with a standard shoulder to correct misalignment.
440 Stainless Steel Track Rollers | 316 Stainless Steel Guide Rails | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Ht. Adjustment Capability | Stud Dia., mm | Stud Lg. | Thread Size | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
Adjustable Shoulder | |||||||||||||||||
| 1.16" | 85 | 0.9" | 0.28" | 0.4" | 0.18" | 0.031" | 5 | 0.5" | M5 | 0.8 | 0.5" | 210° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.83" | 175 | 1.4" | 0.43" | 1/2" | 0.2" | 0.031" | 6 | 0.5" | M6 | 1 | 0.5" | 210° | 00000000 | 00000 | 00000000 | 00000 | |
Sanitary Threaded V-Groove Track Rollers
Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments with these threaded rollers. They’re permanently lubricated, a feature often seen in sanitary areas where repeated lubrication could cause contamination. Their lubricant is NSF registered H1 as safe for incidental contact with food. They’re made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. The bearings are sealed and shielded to keep out liquid and make sure the lubricant stays intact. These rollers have a V-groove profile, which allows debris to fall off when they’re mounted on angle rails. They’re also known as cam followers.
Rollers with an adjustable shoulder are also known as eccentric track rollers. They can be moved up and down, and they’re commonly used alongside standard rollers to correct misalignment. Secure them with a nut for through-hole mounting.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Ht. Adjustment Capability, mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Single-Sealed 440C Stainless Steel V-Groove Rollers | ||||||||||||||||||||
Adjustable Shoulder | ||||||||||||||||||||
| 31 | 11 | 10 | 25 | M10 | 1.5 | 15 | 3.1 | 14 | 1 | 6 | 3 | 3,400 | 590 | 590 | 140 | 175° | Ball | Mounting Hardware | 0000000 | 0000000 |
| 46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 4.1 | 19 | 1.5 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 175° | Ball | Mounting Hardware | 0000000 | 000000 |