How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Underground Snap-Lock Polyethylene Pipe Fittings for Drain, Waste, and Vent
- For Use With: Water
- Specifications Met: ASTM F667
The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications. Made of high-density polyethylene (HDPE), they stand up to freeze/thaw cycles and resist corrosion and stress cracking. Fittings meet ASTM F667 specifications and testing requirements for material quality as well as soil conservation service (SCS) standards for use in underground drain lines.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas. Do not expose fittings to direct sunlight.
For technical drawings and 3-D models, click on a part number.
Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size  | OD | Wd. | Ht. | Socket Dp. | Material | Color | Each | |
| 3 | 3" | 3 3/8" | 2" | 2" | Polyethylene Plastic | Black | 00000000 | 00000 |
Offset straight adapters are also known as eccentric adapters; they have offset centers so the line can drain. Cut the tapered opening to 3 1/2” x 2 1/2” or 4” x 2 3/4”.
Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | Wd. | Ht. | Socket Dp. | Material | Color | Each | |
| 4 | 4" | 3" | 2" | 1 29/32" | Polyethylene Plastic | Black | 00000000 | 00000 |
Underground Snap-Lock Polyethylene Pipe for Drain, Waste, and Vent
- For Use With: Water
- Specifications Met: ASTM F667
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications. Made of high-density polyethylene (HDPE), it stands up to freeze/thaw cycles and resists corrosion and stress cracking. Pipe is corrugated inside and out for flexibility. It meets ASTM F667 specifications and testing requirements for material quality as well as soil conservation service (SCS) standards for use in underground drain lines.
Nonperforated pipe allows you to flow drainage to one area. Perforated pipe has slits along the entire length that allow drainage to be dispersed.
Female/male ends connect to female or male snap-lock fittings. Male ends allow you to join two lengths of pipe without the need for a fitting.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas. Do not expose pipe to direct sunlight.
For technical drawings and 3-D models, click on a part number.
Low-Pressure Clamp-On Connectors for Drain, Waste, and Vent
Tighten the bands on these connectors to form a strong seal on pipe or fittings. Pipe end-to-corrugated pipe connectors connect a rigid plastic pipe to a corrugated polyethylene pipe; a groove in the coupling matches the groove in the corrugated pipe. They are great for storm and drainage systems.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water
- Temperature Range: -40° to 120° F
- Specifications Met: ASTM D5926
- For Pipe Material: PVC Plastic, Polyethylene Plastic
ID | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Pipe OD | For Pipe Size | (A) | (B) | Lg. | Max. Pressure | Max. Vacuum | Material | Clamp Material | Flexibility | Each | |
Pipe End × Corrugated Pipe End | |||||||||||
| 3 1/2" | 3 | 3.44" | 3.57" | 4" | 4 psi @ 72° F | Not Rated | PVC Plastic | 300 Series Stainless Steel | Flexible | 00000000 | 000000 |
| 4 1/2" | 4 | 4.29" | 4.76" | 4" | 4 psi @ 72° F | Not Rated | PVC Plastic | 300 Series Stainless Steel | Flexible | 00000000 | 00000 |
| 6 5/8" | 6 | 6 1/2" | 6.83" | 6" | 4 psi @ 72° F | Not Rated | PVC Plastic | 300 Series Stainless Steel | Flexible | 00000000 | 00000 |
| 8 5/8" | 8 | 8.42" | 9.76" | 6" | 4 psi @ 72° F | Not Rated | PVC Plastic | 300 Series Stainless Steel | Flexible | 00000000 | 00000 |