Filter by
Shank Type
Countersink Type
Manufacturer
Number of Countersinking Ends
REACH
RoHS
Shank Material
Shank Size
Sold As
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flute Type
For Cutting
Material
Number of Flutes
Impact Wrench Countersinks for Screws
 |
 |
Trade your drill for an impact wrench to countersink faster. Made with an oversized shank and hardened high-speed steel, these countersinks are built to handle the high torque of your impact wrench. This means they cut material faster than a power drill without snapping, even when making large holes in hard metals. Since your wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs. Choose an 82° countersink angle for inch screws and a 90° countersink angle for metric screws.
You’ll need a VersaDrive chuck (sold separately) to install these countersinks into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these countersinks directly into a 1/2" chuck on a standard power drill.
Hardened High-Speed Steel
Titanium Nitride (TiN) Coated | ||||||||
|---|---|---|---|---|---|---|---|---|
Body Dia. | Overall Lg. | Shank Size | Shank Type | Mfr. | Each | |||
3 Flutes | ||||||||
82° Countersink Angle | ||||||||
| 1/4" | 1 7/8" | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N11 | 000000 | ||
| 3/8" | 2" | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N12 | 00000 | ||
| 1/2" | 2 3/8" | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N13 | 00000 | ||
| 5/8" | 2 5/8" | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N14 | 00000 | ||
90° Countersink Angle | ||||||||
| 6.3 mm | 45 mm | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N15 | 00000 | ||
| 8.3 mm | 50 mm | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N16 | 00000 | ||
| 10.4 mm | 50 mm | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N17 | 00000 | ||
| 12.4 mm | 50 mm | 7/16" | VersaDrive Hex | Holemaker Technology | 9697N18 | 00000 | ||
 |
Quick-Change |
 |
Strong-Hold |
These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use bits, taps, and other tools.
Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
For Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Square Drive Size | Type | Size | Overall Lg. | Material | Includes | Each | |||
Quick-Change Pull-Back Tool Release | |||||||||
| 1/2" | VersaDrive Hex | 7/16" | 2 5/32" | Black-Oxide Steel | Retaining Ring, Retention Pin | 9589N112 | 000000 | ||
Strong-Hold Push-Forward Tool Release | |||||||||
| 3/8" | VersaDrive Hex | 7/16" | 2" | Manganese Phosphate-Coated Steel | Retaining Ring, Retention Pin | 9589N111 | 000000 | ||
| 1/2" | VersaDrive Hex | 7/16" | 2 5/32" | Manganese Phosphate-Coated Steel | Retaining Ring, Retention Pin | 9589N113 | 000000 | ||
| 3/4" | VersaDrive Hex | 7/16" | 2 3/8" | Manganese Phosphate-Coated Steel | Retaining Ring, Retention Pin | 9589N114 | 000000 | ||
 |
Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
