Use these corrosion-resistant fittings in a low-pressure pipe line.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

Use these fittings for low-pressure applications in noncorrosive environments.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Typically used with thin-wall aluminum unthreaded pipe fittings.

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Slip these joints over your pipe ends and tighten the band clamps for a secure hold.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

Use in low-pressure applications up to 150 psi.

Use in high-pressure applications up to 1,000 psi.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Metal hose fittings have better durability than plastic barbed hose fittings.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.