For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces. All have a plastic body that can stand up to aggressive and corrosive solutions in chemical-processing applications.

T-handles resist accidental movement when snagged or bumped.

Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4".

Full-port valves do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Union fittings on the ends of these valves disassemble to cut down on installation and removal time. They meet NSF/ANSI 61 for use with drinking water. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. All valves have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow. Socket-connect union by socket-connect union valves of pipe sizes 1/2 through 2 come with additional NPT female fittings.

Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4".

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Disassemble the union fittings on these valves for fast installation and removal from your pipeline. They meet NSF/ANSI 61 for use with drinking water. All have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow.

Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4”.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

For easy installation and removal from pipelines, all ends on these valves have union fittings that disassemble into multiple pieces. Their fluoroelastomer seal and plastic body can withstand aggressive and corrosive solutions for diverting flow between ports in chemical-processing applications. In addition to threaded NPT female connections, these valves come with socket-connect (unthreaded) female fittings. All have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow.

Valves with L-pattern flow direct flow from the bottom-port inlet to either side-port outlet or shut off flow completely.

Valves with T-pattern flow can use any port as an inlet or an outlet. Turn the handle to direct flow from the inlet port to either outlet port at full capacity, direct flow to both outlet ports simultaneously at reduced capacity, or shut off flow completely.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.