Crate Openers | McMaster-Carr

Filter by

Pry Bar End Shape

Overall Length

End Style

Material

End Width

Bar Shape

Finish

Aluminum Bronze Coated

Length

RoHS

Performance

Electrically Insulating

Bar Size

Handle Material

Weight

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

Shaft Length

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Number of Nail Slots

Number of Pieces

Head Texture

Grooved

Smooth

End Finish

Aluminum Bronze Coated

Painted

Number of Tools

Handle Color

Handle Length

Color

53 Products

Nail-Pulling Nonsparking Pry Bars


Offset Claw End × Straight Hammer End	Hammer End

The claw-shaped end grips and extracts nails, tacks, and brads. Made of aluminum-bronze that is Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as claw bars.

Warning: Do not use these tools in direct contact with acetylene.

Offset Claw End × Straight Hammer End

Claw End

Hammer End

		Bar
Overall Lg.	Wt., oz.	Size	Shape	End Wd.	No. of Nail Slots	Material	Certification		Each



	9"	14	3/4"	Flat	1 3/8" × 2 3/4"	1	Aluminum Bronze	FM Approved	6489A14	000000

Nail-Pulling Pry Bars


Style A—Deep-Offset Claw End × Offset Claw End	Style B—Deep-Offset Claw End × Offset Chisel End	Style C—Deep-Offset Claw End × Offset Claw End	Style D—Gooseneck Claw End × Offset Claw End

Style E—Gooseneck Claw End × Offset Chisel End	Style F—Gooseneck Claw End × Offset Claw End	Style G—U-Shaped Claw End × Offset Chisel End	Style H—Deep-Offset Double-Claw End × Offset Chisel End

Double-Claw End

Chisel End

Claw End

The claw-shaped end grips and extracts nails, tacks, and brads. Also known as claw bars.

Style A—Deep-Offset Claw End × Offset Claw End


	Claw End

Style A are also known as bear claws.

		Bar
Overall Lg.	Wt.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	7 3/4"	11 oz.	3/8"	Flat	5/8" × 5/8"	2	Painted Steel	37205A68	000000


	10 1/2"	14 oz.	1/2"	Flat	13/16" × 13/16"	2	Painted Steel	37205A71	00000
	11 3/4"	1 1/8 lb.	1/2"	Flat	7/8" × 7/8"	2	Painted Steel	37205A72	00000
	14 1/4"	1 5/8 lb.	5/8"	Flat	1" × 1"	2	Painted Steel	37205A74	00000

Style B—Deep-Offset Claw End × Offset Chisel End

Claw End

Chisel End

Style B are often used for stripping and removing wooden concrete forms after concrete has set.

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	36"	5 1/2	3/4"	Hex	1 5/16" × 1"	1	Painted Steel	58835A1	000000


	42"	8	7/8"	Hex	1 7/8" × 1 3/8"	1	Painted Steel	58835A2	00000
	48"	12	1"	Hex	2" × 1 1/4"	1	Painted Steel	58835A3	00000
	60"	14	1"	Hex	2" × 1 1/4"	1	Painted Steel	58835A4	00000

Style C—Deep-Offset Claw End × Offset Claw End


	Claw End

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	18"	1 3/8	3/8"	I-Beam	1 3/4" × 1 3/8"	3	Painted Steel	6004A11	000000

Style D—Gooseneck Claw End × Offset Claw End


	Claw End

		Bar
Overall Lg.	Wt.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	5 1/4"	1 oz.	1/2"	Flat	1/2" × 1/2"	3	Steel	6000A3	00000


	7 1/4"	5 oz.	1"	Flat	1" × 1"	3	Steel	6000A2	0000
	15"	1 1/2 lb.	1 3/8"	Flat	1 3/4" × 1 7/8"	3	Painted Steel	6000A1	00000
	21"	2 lb.	1 3/8"	Flat	1 3/4" × 1 7/8"	3	Painted Steel	6000A4	00000

Style E—Gooseneck Claw End × Offset Chisel End

Claw End

Chisel End

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	24"	4	3/4"	Hex	1 3/8" × 1"	1	Painted Steel	5956A11	000000


	36"	5 1/2	3/4"	Hex	1 3/8" × 1"	1	Painted Steel	5956A13	00000

Style F—Gooseneck Claw End × Offset Claw End


	Claw End

Style F have a handle arch that allows more swing during pulling and prying without the need to use a block for leverage.

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material	Features		Each



	15 1/2"	1 3/4	1 3/8"	Flat	1 3/4" × 1 3/4"	3	Painted Steel	Handle Arch	6769A12	000000

Style G—U-Shaped Claw End × Offset Chisel End

Claw End

Chisel End

Style G are also known as crow bars.

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	24"	3 1/2	3/4"	Hex	1 3/8" × 1"	1	Painted Steel	5992A13	000000


	30"	4 1/4	3/4"	Hex	1 3/8" × 1"	1	Painted Steel	5992A14	00000
	36"	8 1/2	1"	Hex	2 1/4" × 1 1/2"	1	Painted Steel	5992A6	00000
	42"	9	7/8"	Hex	1 5/8" × 1 1/8"	1	Painted Steel	5992A5	00000
	48"	12 1/2	1"	Hex	2 1/8" × 1 5/8"	1	Painted Steel	5992A17	00000
	60"	15 1/2	1"	Hex	2 1/4" × 1 1/2"	1	Painted Steel	5992A7	00000

Style H—Deep-Offset Double-Claw End × Offset Chisel End

Double-Claw End

Chisel End

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	No. of Nail Slots	Material		Each



	36"	8 1/2	7/8"	Hex	1 1/2" × 1 3/8"	2	Powder-Coated Steel	6006A14	000000


	48"	11	7/8"	Hex	1 1/2" × 1 3/8"	2	Powder-Coated Steel	6006A16	00000

Pry Bars


Style K—Gooseneck Chisel End × Straight Chisel End	Chisel End

Style K—Gooseneck Chisel End × Straight Chisel End


	Chisel End

Style K are good for separating die sets. Also known as die bars.

Gooseneck end gives you more leverage than straight end.

Offset end gives you more leverage than straight end.

		Bar
Overall Lg.	Wt.	Size	Shape	End Wd.	Material		Each



	7"	8 oz.	5/16"	Hex	5/16" × 5/16"	Painted Steel	5927A41	000000


	12"	1 lb.	7/16"	Hex	7/16" × 7/16"	Painted Steel	5927A42	00000
	18"	1 3/4 lb.	5/8"	Hex	5/8" × 5/8"	Painted Steel	5927A11	00000
	30"	4 lb.	3/4"	Hex	3/4" × 3/4"	Painted Steel	5927A18	00000

Pry Bar Sets


Chisel	Wedge

Pointed End	Round

Offset Pry Bar End—Offset end gives you more leverage than straight end.

Wedge—Wedge end is tapered on both sides of the bar.

Pointed End—Pointed end is often used for aligning bolt holes.

Gooseneck Pry Bar End—Gooseneck end gives you more leverage than straight end.

No. of Pieces	End Style	Overall Lg.	Wt.	Bar Size	Bar Shape	End Wd.	Material		Each
4	Offset Wedge × Straight Point Gooseneck Chisel × Straight Point Offset Wedge × Straight Point Straight Chisel × Straight Round	14" 16" 18" 20"	12 oz. 1 lb. 2 1/4 lb. 2 1/4 lb.	1/2" 1/2" 3/4" 3/4"	Hex Hex Hex Hex	5/8" × 1/4" 5/8" × 1/4" 7/8" × 5/16" 7/8" × 3/4"	Steel	5958A71	000000

Screwdriver-Style Nail-Pulling Pry Bars


	Claw End

The claw-shaped end grips and extracts nails, tacks, and brads while the plastic handle provides a comfortable grip.

				Bar
	Overall Lg.	Shaft Lg.	Wt., oz.	Size	Shape	End Wd.	No. of Nail Slots	Material	Handle Material		Each
Offset Claw End



		7 1/4"	3 3/4"	2	1/4"	Round	7/16"	1	Nickel-Plated Steel	Plastic	5865A11	00000

Multitools


Style A	Style B	Style C

An alternative to Swiss Army knives, these contain a variety of tools aside from knives for use on the go. These tools are made with stainless steel, so they resist corrosion.

Multitools													Replacement Blades
						Handle
Style	No. of Tools	Tools Included	Tool Material	Closed Lg.	Overall Lg.	Lg.	Wd.	Material	Color	Multitool Features		Each	Pkg. Qty.	Pkg. Qty.			Pkg.
A	8	Bottle Opener, Large Slotted Screwdriver, Nail Puller, Pry Bar, Small Slotted Screwdriver, Utility Blade, Wire Cutter, Wire Stripper	Stainless Steel	4 1/4"	5"	4 1/4"	1 1/4"	Stainless Steel	Green	Key Chain Hole	6421N13	000000	—	5	———	38755A22	00000
B	8	1/4" Phillips Screwdriver, Awl/Punch, Bottle Opener, Hammer, Large Scissors, Pry Bar, Small Slotted Screwdriver, Smooth-Edge Knife	Stainless Steel	3 5/8"	6 1/2"	3 5/8"	11/16"	Stainless Steel	Gray	—	6421N11	00000	—	—	———	———	0
C	10	Bottle Opener, Chisel, Large Slotted Screwdriver, Metal/Wood File, Nail Puller, Precision Knife, Pry Bar, Small Scissors, Small Slotted Screwdriver, Smooth-Edge Knife	Stainless Steel	4"	6 5/8"	4"	9/16"	Stainless Steel	Gray	—	6421N12	00000	5	—	35435A16	———	0000

Nonmarring Pry Bars

The gooseneck end of these pry bars is aluminum-bronze coated to prevent scratching. Often used to separate die blocks, they're also known as die bars.

Gooseneck Chisel End × Straight Chisel End

Chisel End

		Bar
Overall Lg.	Wt., lb.	Size	Shape	End Wd.	Material		Each



	22"	2 1/4	5/8"	Hex	3/4" × 3/4"	Painted Steel	5927A31	000000


	42"	7	7/8"	Hex	1" × 1"	Painted Steel	5927A34	000000

Electrically-Insulating Pry Bars


	Offset Wedge End

An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The end is tapered on both sides of the bar.

				Bar
	Overall Lg.	Shaft Lg.	Wt., lb.	Size	Shape	End Wd.	Material	Handle Material	Specs. Met		Each
Offset Wedge End



		36"	8 3/4"	8	1 3/8"	Round	1"	Black-Oxide Steel	Plastic	IEC 60900, ASTM F1505	2831N61	0000000

Miniature Pry Bars


	Claw End

Lift and pry small objects, such as electronic and circuit board-mounted components. These tools have a static-dissipative handle that drains static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They are also known as chip lifters.

				Bar
	Overall Lg.	Shaft Lg.	Wt., oz.	Size	Shape	End Wd.	Material	Handle Material	Surface Resistivity		Each
Offset Claw End



		5 3/4"	2"	1	1/8"	Flat	1/8"	Chrome-Plated Steel	Plastic	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	3808A45	000000

Screwdriver-Style Pry Bar Sets


	Wedge End

The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.

No. of Pieces	End Style	Overall Lg.	Shaft Lg.	Wt.	Bar Size	Bar Shape	End Wd.	Material		Each
3	Offset Wedge End	12" 17" 25"	7" 12" 18"	6 oz. 8 oz. 1 1/2 lb.	3/8" 3/8" 1/2"	Flat Flat Flat	5/8" 5/8" 3/4"	Black-Oxide Steel	60025A7	000000

Adjustable-Head Pry Bars

Smooth

Head

Grooved

Head

With 14 different head positions, these pry bars fit into difficult-to-access spots for maximum leverage. Because you set the head where you need it, these bars replace the need to have multiple pry bars on hand. Use them for jobs ranging from demolition work to aligning components. Made of steel, these pry bars meet ASME B107.410, so they’ll hold up in heavy duty industrial work.

Smooth Head—Bars with a smooth head have no ridges, so they easily slide into tight spots.

Grooved Head—Bars with a grooved head grip better than bars with a smooth head. They're less likely to slip during high-torque prying.

			Bar		End
	Overall Lg.	Wt.	Size	Shape	Wd.	Style	Range of Motion	Material	Handle Material	Specs. Met		Each
Smooth Head



		8"	12 oz.	5/8"	Round	1/4"	Wedge	180°	Phosphate-Coated Steel	Steel	ASME B107.410	5034N11	000000


		10"	1 lb.	5/8"	Round	1/2"	Wedge	180°	Phosphate-Coated Steel	Steel	ASME B107.410	5034N12	00000
		16"	1 3/4 lb.	5/8"	Round	1/2"	Wedge	180°	Phosphate-Coated Steel	Steel	ASME B107.410	5034N13	00000


		Grooved Head



				24"	5 lb.	3/4"	Round	7/8"	Wedge	180°	Phosphate-Coated Steel	Steel	ASME B107.410	5034N14	000000


				33"	6 lb.	3/4"	Round	7/8"	Wedge	180°	Phosphate-Coated Steel	Steel	ASME B107.410	5034N15	000000

Screwdriver-Style Pry Bars


	Wedge End

The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.

Pry bars 36" and longer have a cap on the end of the handle that lets you strike it without damage.

				Bar
	Overall Lg.	Shaft Lg.	Wt.	Size	Shape	End Wd.	Material	Handle Material	Features		Each
Offset Wedge End



		12"	7"	6 oz.	3/8"	Flat	5/8"	Black-Oxide Steel	Plastic	—	60025A65	000000


		17"	12"	8 oz.	3/8"	Flat	5/8"	Black-Oxide Steel	Plastic	—	60025A66	00000
		25"	18"	1 1/2 lb.	1/2"	Flat	3/4"	Black-Oxide Steel	Plastic	—	60025A67	00000
		31"	24"	2 lb.	1/2"	Flat	3/4"	Black-Oxide Steel	Plastic	—	60025A68	00000
		36"	29"	4 lb.	5/8"	Flat	1"	Black-Oxide Steel	Plastic	Striking Cap	60025A69	00000
		42"	35"	5 1/2 lb.	5/8"	Flat	1"	Black-Oxide Steel	Plastic	Striking Cap	60025A71	00000
		48"	38"	7 1/2 lb.	3/4"	Flat	1"	Black-Oxide Steel	Plastic	Striking Cap	60025A72	000000