McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Sealers for Metal Strapping

    Image of Product. Front orientation. Strapping Sealers. Sealers for Metal Strapping, Style A.
    Image of Product. Front orientation. Strapping Sealers. Sealers for Metal Strapping, Style B.
    Image of Product. Front orientation. Strapping Sealers. Sealers for Metal Strapping, Style C.

    Style A

    Style B

    Style C

    Also known as crimpers, these sealers secure seals (sold separately) onto metal strapping.
    Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
    For Open Seals—Sealers for open seals cut two notches on each side of the seal with one operation.
    For Closed Seals—Sealers for closed seals cut a single notch on each side of the seal with one operation. For best results, apply two notches per seal.
    For Open Seals
    For Closed Seals
    Style
    For Strapping
    Group No.
    For Strapping
    Wd.
    For Strapping
    Thk.
    For Use With
    Each
    Each
    A13/8"0.015" to 0.025"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T46000000020275T5130000000
    A2, 31/2"0.015" to 0.023"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T4700000020275T514000000
    A4, 55/8"0.015" to 0.023"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T4800000020275T515000000
    A6, 73/4"0.015" to 0.023"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T4900000020275T516000000
    B31/2"0.023" to 0.031"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T51000000———0
    B55/8"0.023" to 0.031"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T52000000———0
    B7, 83/4"0.023" to 0.031"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T53000000———0
    C83/4"0.025" to 0.035"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T5700000020275T55000000
    C91 1/4"0.025" to 0.035"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T5800000020275T56000000

    Tensioners/Sealers for Metal Strapping

    Image of Product. Front orientation. Strapping Tensioners/Sealers. Tensioners/Sealers for Metal Strapping.
    These tools do double duty, pulling metal strapping tight and then fastening it, without the use of a separate seal. They create a joint by crimping interlocking notches into the strapping and cutting off the excess.
    Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
    For Strapping
    Group No.
    For Strapping
    Wd.
    For Strapping
    Thk.
    For Use With
    Each
    2, 31/2"0.015" to 0.025"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T910000000
    4, 55/8"0.015" to 0.025"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T92000000
    6, 73/4"0.015" to 0.025"Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T93000000

    Metal Strapping Tensioners

    Image of Product. Front orientation. Strapping Tensioners. Metal Strapping Tensioners, Style A.
    Image of Product. Front orientation. Strapping Tensioners. Metal Strapping Tensioners, Style B.

    Style A

    Style B

    Image of Product. Front orientation. Strapping Tensioner Feedwheels. Metal Strapping Tensioners.
    Image of Product. Front orientation. Ratchet Gears and Pawls. Metal Strapping Tensioners.

    Replacement

    Feedwheels

    Replacement

    Ratchet Gears

    Use these tensioners to draw metal strapping tight around packages. These tensioners hold the bottom strap while either a feedwheel or gripper bites into the strap and tightens it.
    Note: To match with compatible metal strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
    For Open Seals—Tensioners for open seals are for use on flat surfaces. Strapping is wrapped around the package and overlapped on top.
    Styles A and B—Style A, B, and C tensioners have a lever handle that you squeeze to tighten the tension. They have unlimited ratcheting take-up, so they can be continually tensioned until tight.
    Tensioners
    Replacement
    Feedwheels
    Replacement
    Ratchet Gears
    Style
    For Strapping
    Group No.
    For Strapping
    Wd.
    For Strapping
    Thk.
    Handle
    Type
    Grip
    Style
    Ratcheting
    Take Up
    For Use With
    Each
    Each
    Each
    For Open Seals
    A2, 3, 5, 73/8" to 3/4"0.018" to 0.023"LeverBallUnlimitedLow-Carbon Steel Strapping5967N120000000———0———0
    B2, 3, 5, 73/8" to 3/4"0.018" to 0.023"LeverCushionUnlimitedLow-Carbon Steel Strapping5967N110000002071T3520000002071T351000000
     

    High-Tension Metal Strapping Tensioners

    Image of Product. Front orientation. Strapping Tensioners. High-Tension Metal Strapping Tensioners, Style A.
    Image of Product. Front orientation. Strapping Tensioners. High-Tension Metal Strapping Tensioners, Style B.

    Style A

    Style B

    Image of Product. Front orientation. Strapping Tensioners. High-Tension Metal Strapping Tensioners, Style C.
    Image of Product. Front orientation. Strapping Tensioners. High-Tension Metal Strapping Tensioners, Style D.

    Style C

    Style D

    These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping. They work on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping, creating high tension without slip. Pull strapping tight manually before applying tension.
    Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
    Style A—Style A tensioners have a wing handle that you spin to tighten the tension.
    Styles B-D—Style B, C, and D tensioners have a lever handle that you squeeze to tighten the tension.
    Limited Ratcheting Take Up—Tensioners with limited ratcheting take-up can only be tensioned to a certain point before they need to be reset.
    Unlimited Ratcheting Take Up—Tensioners with unlimited ratcheting take-up can be continually tensioned until tight.
    Style
    For Strapping Group No.
    For Strapping
    Wd.
    For Strapping
    Thk.
    Handle
    Type
    Ratcheting
    Take Up
    For Use With
    Each
    For Open Seals
    A323/4" to 1 1/4"0.044" to 0.048"WingLimitedLow-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping, 316 Stainless Steel Strapping20275T2030000000
     
    For Closed Seals
    B1, 2, 3, 4, 5, 6, 7, 21, 223/8" to 3/4"0.015" to 0.023"LeverLimitedLow-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T23000000
    C3, 5, 7, 8, 23, 29, 303/8" to 3/4"0.020" to 0.031"LeverUnlimitedLow-Carbon Steel Strapping, High-Carbon Steel Strapping20275T201000000
    C5, 7, 8, 9, 315/8" to 1 1/4"0.023" to 0.044"LeverUnlimitedLow-Carbon Steel Strapping, High-Carbon Steel Strapping20275T202000000
    D5, 7, 8, 95/8" to 1 1/4"0.023" to 0.031"LeverLimitedLow-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping20275T22000000
     
    back to top