Heavy Duty Clamp-On Framing and Fittings
Thick construction makes this framing strong and sturdy. This system has a secure clamping mechanism to hold heavy loads—no machining or welding required. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations. Clamp fittings onto the rail and tighten the included hex head screws.
For technical drawings and 3-D models, click on a part number.
Clamp-On Framing and Fittings
Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
For technical drawings and 3-D models, click on a part number.
Galvanized Iron and Steel Slip-On Framing and Fittings
To provide corrosion resistance in wet environments, this framing is galvanized. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
Galvanized iron fittings are malleable iron.
For technical drawings and 3-D models, click on a part number.
Through-hole fittings allow rails to run all the way through.
| For Rail OD | For Pipe Size | No. of Through Holes | Material | Includes | Each | |
Crossover | ||||||
|---|---|---|---|---|---|---|
| 1" | 3/4 | 2 | Galvanized Iron | Set Screws | 00000000 | 000000 |
| 1 3/8" | 1 | 2 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 2 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | 2 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 2 3/8" | 2 | 2 | Galvanized Iron | Set Screws | 0000000 | 00000 |
Add-on through-hole fittings can be added to existing structures without disassembling.
Hinged | Wraparound | |||||||
|---|---|---|---|---|---|---|---|---|
| For Rail OD | For Pipe Size | No. of Through Holes | Material | Includes | Each | Each | ||
Crossover | ||||||||
| 1" | 3/4 | 2 | Galvanized Iron | Set Screws | 000000 | 00 | 00000000 | 000000 |
| 1 3/8" | 1 | 2 | Galvanized Iron | Set Screws | 000000 | 00 | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 2 | Galvanized Iron | Set Screws | 00000000 | 000000 | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | 2 | Galvanized Iron | Set Screws | 00000000 | 00000 | 0000000 | 00000 |
| 2 3/8" | 2 | 2 | Galvanized Iron | Set Screws | 000000 | 00 | 0000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
Reducers allow transitions from one rail size to another.
For Rail OD | For Pipe Size | |||||||
|---|---|---|---|---|---|---|---|---|
| (A) | (B) | (A) | (B) | No. of Through Holes | Material | Includes | Each | |
Crossover | ||||||||
| 1 3/8" | 1" | 1 | 3/4 | 2 | Galvanized Iron | Set Screws | 00000000 | 000000 |
| 1 5/8" | 1 3/8" | 1 1/4 | 1 | 2 | Galvanized Iron | Set Screws | 00000000 | 00000 |
| 1 7/8" | 1 5/8" | 1 1/2 | 1 1/4 | 2 | Galvanized Iron | Set Screws | 00000000 | 00000 |
| 2 3/8" | 1 7/8" | 2 | 1 1/2 | 2 | Galvanized Iron | Set Screws | 00000000 | 00000 |
Aluminum Slip-On Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Through-hole fittings allow rails to run all the way through.
| For Rail OD | For Pipe Size | Lg. | No. of Through Holes | Includes | Each | |
Crossover | ||||||
|---|---|---|---|---|---|---|
Aluminum | ||||||
| 1" | 3/4 | 1 1/2" | 2 | Set Screws | 0000000 | 000000 |
| 1" | 3/4 | 2 1/2" | 2 | Set Screws | 0000000 | 00000 |
| 1 1/4" | 1 | 1 7/8" | 2 | Set Screws | 0000000 | 00000 |
| 1 1/4" | 1 | 3 1/2" | 2 | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 2 1/4" | 2 | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 3 1/2" | 2 | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | 2 1/2" | 2 | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | 3 1/2" | 2 | Set Screws | 0000000 | 00000 |
| 2 3/8" | 2 | 4" | 2 | Set Screws | 00000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
Add-on through-hole fittings can be added to existing structures without disassembling.
Through-hole fittings allow rails to run all the way through.
T-Slotted Framing Mounting Brackets
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
Tube holders attach tubes (sold separately) to a T-slotted framing system. Use them to create tube supports, glides, or racks. Quick-install tube-to-tube holders have a handle to secure the tube in place.
Use tube holders for two tubes to mount two lines of tube along one framing rail.
| For Rail Ht. | For Number of Tubes | For Tube OD | Color | Material | Handle Material | Each | |
Quick-Install Tube-to-Tube for Single Rails | |||||||
|---|---|---|---|---|---|---|---|
| 1", 1 1/2" | 2 | 1" | Black | Anodized Aluminum | Plastic | 000000000 | 0000000 |
Quick-Install Tube-to-Tube for Single and Double and Quad Rails | |||||||
| 1", 1 1/2", 2", 3" | 2 | 1" | Silver | Anodized Aluminum | Plastic | 00000000 | 00000 |
| OD | ID | Lg., ft. | Color | Material | Each | |
| 1" | 3/4" | 4 | Silver | Anodized Aluminum | 000000000 | 000000 |
Mounting Rod Connectors for Conveyors
Also known as cross blocks, these connectors join rods at different angles.
Connectors for square or hexagon rods have grooves in their round bores to grip rods with corners.
Style A, C, D, J, K, M, P, and R connectors can be permanently installed on both ends.
Loosen the bolts on Style B connectors to adjust the angle for mounting versatility.
Style E and F connectors can be permanently installed on the nut end and quickly adjusted on the other end using the knob.
Turn the knobs on Style G and H connectors to make quick vertical and horizontal adjustments.
Style L and Q connectors have a knob for making quicker adjustments than connectors with nuts, which require tools for adjustments.
Style N connectors pivot, so you can position your rods at any angle.
For technical drawings and 3-D models, click on a part number.
Connectors | Replacement Knobs | |||||||
|---|---|---|---|---|---|---|---|---|
| Style | For Rod Dia. | For Rod Wd. | Angle | Material | Each | Each | ||
For Round Rods | ||||||||
| A | 1/2" | __ | 90° | Stainless Steel | 00000000 | 000000 | 000000 | 00 |
| B | 1/2" | __ | 90°-180° | Stainless Steel | 00000000 | 00000 | 000000 | 00 |
| C | 1/2" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| C | 1/2" × 5/8" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| C | 5/8" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| D | 1/2" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| D | 1/2" × 5/8" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| D | 5/8" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| E | 1/2" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| E | 1/2" × 5/8" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| E | 5/8" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| F | 1/2" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| F | 1/2" × 5/8" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| F | 5/8" | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| G | 1/2" | __ | 90° | Plastic | 0000000 | 00000 | 00000000 | 000000 |
| G | 1/2" × 5/8" | __ | 90° | Plastic | 00000000 | 00000 | 00000000 | 00000 |
| G | 5/8" | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| H | 1/2" | __ | 90° | Stainless Steel | 0000000 | 00000 | 00000000 | 00000 |
| H | 1/2" × 5/8" | __ | 90° | Stainless Steel | 00000000 | 00000 | 00000000 | 00000 |
| H | 5/8" | __ | 90° | Stainless Steel | 00000000 | 00000 | 000000 | 00 |
| H | 5/8" × 3/4" | __ | 90° | Stainless Steel | 00000000 | 00000 | 000000 | 00 |
| H | 3/4" | __ | 90° | Stainless Steel | 00000000 | 00000 | 000000 | 00 |
| J | 1/2" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| J | 1/2" × 5/8" | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| J | 5/8" | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| J | 3/4" | __ | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| J | 12mm | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| J | 14mm | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| J | 18mm | __ | 90° | Plastic | 00000000 | 00000 | 000000 | 00 |
| K | 12mm | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| K | 15mm | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| K | 20mm | __ | 90° | Stainless Steel | 0000000 | 00000 | 000000 | 00 |
| L | 1/2" | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 5/8" | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 3/4" | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 10mm | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 12mm | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 14mm | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| L | 18mm | __ | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| M | 1/2" | __ | 90° | Stainless Steel | 0000000 | 000000 | 000000 | 00 |
For Round, Square Rods | ||||||||
| N | 15mm | 12mm | 90°-180° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| P | 12mm | 10mm | 90° | Aluminum | 0000000 | 00000 | 000000 | 00 |
| Q | 3/8" | 5/16" | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| Q | 1/2" | 7/16" | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
| Q | 5/8" | 1/2" | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |
For Round, Hexagon Rods | ||||||||
| R | 1/2" | 7/16" | 90° | Plastic | 0000000 | 00000 | 000000 | 00 |