McMaster-Carr logo
    Filter by
    Number of Steps
    Platform Width
    Climbing Angle
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    167 Products

    Build-Your-Own Fixed Work Platforms

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Build-Your-Own Fixed Work Platforms.

    Shown Assembled

    Configure a work platform to fit your application.
    First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface (mounting hardware not included).
    Stairs
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated Step—Steps are serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Steps
    Mounting
    Holes
    Platform
    Ht.
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Tread
    Climbing
    Angle
    Wt. Cap.,
    lb.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Specs. Met
    Each
    Aluminum
    18"14"124"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N410000000
    27"23"224"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N42000000
    36"32"324"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N43000000
    45"41"424"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N44000000
    54"50"524"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N45000000
    63"59"624"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N46000000
    72"68"724"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N47000000
    81"77"824"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N48000000
     
    Stair Handrails
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Ht.
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    18"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N61000000
    27"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N62000000
    36"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N63000000
    45"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N64000000
    54"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N65000000
    63"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N66000000
    72"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N67000000
    81"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N68000000
     
    Platform Supports
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Mounting
    Holes
    For Platform
    Ht.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Includes
    Specs. Met
    Each
    Aluminum
    18"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N510000000
    27"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N52000000
    36"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N53000000
    45"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N54000000
    54"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N55000000
    63"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N56000000
    72"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N57000000
    81"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N58000000
     
    Platform Sections
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated—Platform is serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Assembly
    Specs. Met
    Each
    Aluminum
    30"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N710000000
    60"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N72000000
    90"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N1100000000
    120"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N7300000000
     
    Platform Handrails
    Platform handrails have built-in toeboards.
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Lg.
    Ht.
    Toeboard
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    30"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N810000000
    60"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N82000000
     

    Space-Saver Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Space-Saver Crossover Stairs, Style 2.
    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Space-Saver Crossover Stairs, Style 3.
    Image of Specification. Style 3 - Forward Descent. Front orientation. Crossover Stairs. Space-Saver Crossover Stairs, Style 3.

    Style 2

    Style 3

    Style 3 - Forward Descent

    Set at a steeper angle than our other crossover stairs, these stairs require less floor space. They let you walk over conveyors, machines, and pipes. However, the steeper incline makes it more difficult to ascend and descend the stairs.
    Powder-Coated Steel—Made of steel, these stairs withstand heavy use in most industrial applications. A powder coating adds protection from corrosion.
    Serrated Step—Serrated treads prevent slipping and allow liquids and dirt to pass through.
    Style 2—Style 2 have vertical ladders on both sides, so you can fit wide equipment underneath. The top of each rung is textured for traction. However, the ladders may be challenging to use while carrying materials.
    Style 3—Style 3 have offset steps that let you descend comfortably and safely while facing forward.
    Specifications Met—Crossover stairs with listed OSHA or Cal/OSHA specifications meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Style
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Dia.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Yellow Powder-Coated Steel
     
    Round Step
    279"29"53"35"32"3 ft.24"4 ft.1"23 5/8"—500343"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N15000000000
    279"29"65"35"44"3 ft.24"5 ft.1"23 5/8"—500343"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N1600000000
    291"29"53"47"32"4 ft.24"4 ft.1"23 5/8"—500443"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N1700000000
    291"29"65"47"44"4 ft.24"5 ft.1"23 5/8"—500443"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N1800000000
    2103"29"53"59"32"5 ft.24"4 ft.1"23 5/8"—500543"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N1900000000
    2103"29"65"59"44"5 ft.24"5 ft.1"23 5/8"—500543"Yes49/16"UnassembledOSHA Compliant 29 CFR 1910.279862N2100000000
     
    Flat Step with Serrated Tread
    36 ft.24"60"27"26 7/8"30"21"20"—20 1/8"10 1/2"350842"No49/16"UnassembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.259862N1100000000
    36 ft.24"66"35"27"38"21"20"—20 1/8"10 1/2"3501042"No49/16"UnassembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.259862N1200000000
    391"24"76"46"27"49"21"20"—20 1/8"10 1/2"3501442"No49/16"UnassembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.259862N1300000000
    3102"24"85"58"27"61"21"20"—20 1/8"10 1/2"3501642"No49/16"UnassembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.259862N1400000000
     

    Corrosion-Resistant Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Corrosion-Resistant Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Aluminum—Aluminum is a good choice for damp areas and outdoor use.
    Serrated Step—Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Aluminum
     
    Flat Step with Serrated Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T75000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9500000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7600000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9600000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7700000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9700000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7800000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9800000000
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T16100000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T35100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T17100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T36100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T18100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T37100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T19100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T38100000000
     

    Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Serrated Step—Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    Flat Step with Serrated Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T71000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7200000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9200000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7300000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9300000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7400000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9400000000
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T11100000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T27100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T12100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T28100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T13100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T29100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T14100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T15100000000
     

    Fixed Work Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 1.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 2.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 3.

    Style 1

    Style 2

    Style 3

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 4.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 5.
    Image of Product. Front orientation. Contains Annotated, Inset. Work Platforms. Fixed Work Platforms, Style 6.

    Style 4

    Style 5

    Style 6

    Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable.
    Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.
    Style 1
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 1.
    Style 1 allows you to lower the platform up to 3" by sliding the U-bolts. They don’t have handrails, so you can work freely in any direction.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"21"38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T80000000
    30" to 33"24 1/4" to 27"500336"9 1/2"33"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T9000000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform39", 77"8031T1340000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps2, 3, 48031T1370000000
    Replacement Posts
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Platform Legs.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Connector Posts.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Legs.

    Platform

    Legs

    Step

    Connector

    Posts

    Step Legs

    For Max.
    Platform Ht.
    For Platform
    Dp.
    For No.
    of Steps
    Each
    Platform Legs
    21"——8031T116000000
    33"——8031T11800000
     
    Step Connector Posts
    —39", 77"3, 48031T13500000
     
    Step Legs
    21", 33"——8031T13600000
     
    Style 2
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 2.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 2 allows you to lower the platform up to 3" by sliding the U-bolts. They are open on one side. They’re often used beside conveyors or assembly stations.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T120000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4100000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4200000000———0
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4300000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T52000000008031T139000000
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T68000000008031T13900000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T65000000008031T13900000
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"104"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T44000000008031T13900000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform39", 77"8031T1340000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps2, 3, 48031T1370000000
    Replacement Handrails
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Back Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Platform Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Stair Handrails.

    Back Handrails

    Platform Handrails

    Stair

    Handrails

    For Max.
    Platform Ht.
    For Platform
    Wd.
    Each
    Back Handrails
    —36"8031T1220000000
     
    Platform Handrails
    21"—8031T123000000
    27"—8031T124000000
    33"—8031T125000000
    45"—8031T127000000
     
    Stair Handrails
    27"—8031T129000000
    33"—8031T131000000
    45"—8031T133000000
     
    Replacement Posts
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Platform Legs.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Platform Posts.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Connector Posts.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Legs.

    Platform

    Legs

    Platform

    Posts

    Step

    Connector

    Posts

    Step Legs

    For Max.
    Platform Ht.
    For Platform
    Dp.
    For No.
    of Steps
    Each
    Platform Legs
    21"——8031T116000000
    27"——8031T11700000
    33"——8031T11800000
    45"——8031T12100000
     
    Platform Posts
    21"——8031T11100000
    27"——8031T11200000
    33"——8031T11300000
    45"——8031T11500000
     
    Step Connector Posts
    —39", 77"3, 48031T13500000
     
    Step Legs
    21", 33"——8031T13600000
    27"——8031T7900000
     
    Style 3
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 3.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 3 allows you to lower the platform up to 3" by sliding the U-bolts. They are open on one side. They’re often used beside conveyors or assembly stations.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T140000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T7700000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T3100000000———0
    36" to 39"30 1/4" to 33"500436"9 1/2"78"38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T7800000000———0
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T3200000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T24000000008031T139000000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T61000000008031T13900000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform39", 77"8031T1340000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps2, 3, 48031T1370000000
    Replacement Handrails
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Platform Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Stair Handrails.

    Platform Handrails

    Stair

    Handrails

    For Max.
    Platform Ht.
    Each
    Platform Handrails
    21"8031T1230000000
    27"8031T124000000
    33"8031T125000000
    39"8031T126000000
    45"8031T127000000
     
    Stair Handrails
    27"8031T129000000
    33"8031T131000000
    39"8031T132000000
    45"8031T133000000
     
    Replacement Posts
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Platform Legs.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Connector Posts.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Legs.

    Platform

    Legs

    Step

    Connector

    Posts

    Step Legs

    For Max.
    Platform Ht.
    For Platform
    Dp.
    For No.
    of Steps
    Each
    Platform Legs
    21"——8031T116000000
    27"——8031T11700000
    33"——8031T11800000
    39"——8031T11900000
    45"——8031T12100000
     
    Step Connector Posts
    —39", 77"3, 48031T13500000
     
    Step Legs
    21", 33"——8031T13600000
    27"——8031T7900000
     
    Style 4
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 4.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 4 allows you to lower the platform up to 3" by sliding the U-bolts. They have handrails on multiple sides of the platform to reduce fall risk.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T130000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T2100000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T2200000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T23000000008031T139000000
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T11000000008031T13900000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T62000000008031T13900000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform39", 77"8031T1340000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps2, 3, 48031T1370000000
    Replacement Handrails
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Back Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Platform Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Stair Handrails.

    Back Handrails

    Platform Handrails

    Stair

    Handrails

    For Max.
    Platform Ht.
    For Platform
    Wd.
    Each
    Back Handrails
    —36"8031T1220000000
     
    Platform Handrails
    21"—8031T123000000
    27"—8031T124000000
    33"—8031T125000000
     
    Stair Handrails
    27"—8031T129000000
    33"—8031T131000000
     
    Replacement Posts
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Connector Posts.
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Legs.

    Step

    Connector

    Posts

    Step Legs

    For Max.
    Platform Ht.
    For Platform
    Dp.
    For No.
    of Steps
    Each
    Step Connector Posts
    —39", 77"3, 48031T135000000
     
    Step Legs
    21", 33"——8031T13600000
     
    Style 5
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 5.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 5 allows you to lower the platform up to 3" by sliding the U-bolts. They have handrails on multiple sides of the platform to reduce fall risk.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht. (C),
    ft.
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    30" to 33"24 1/4" to 27"500336"9 1/2"638 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T54000000000———0
     
    36" Wide Platform × 77" Deep Platform
    30" to 33"24 1/4" to 27"500336"9 1/2"638 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T64000000008031T139000000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform39", 77"8031T1340000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps2, 3, 48031T1370000000
    Replacement Handrails
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Platform Handrails.
    Image of Product. Front orientation. Work Platform Handrails. Fixed Work Platforms, Stair Handrails.

    Platform Handrails

    Stair

    Handrails

    For Max.
    Platform Ht.
    Each
    Platform Handrails
    33"8031T1250000000
     
    Stair Handrails
    33"8031T131000000
     
    Replacement Posts
    Image of Product. Front orientation. Work Platform Posts. Fixed Work Platforms, Step Connector Posts.

    Step

    Connector

    Posts

    For Platform
    Dp.
    For No.
    of Steps
    Each
    Step Connector Posts
    39", 77"3, 48031T135000000
     
    Style 6
    Image of Product. Front orientation. Contains Annotated, Inset. Work Platforms. Fixed Work Platforms, Style 6.
    Style 6 have a hinged access panel that you can flip up and remove to inspect and maintain nearby machinery, such as conveyor systems.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Gray Painted Steel
     
    30" Wide Platform × 30" Deep Platform
    18"14"500227"9 1/2"18"42"40"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N11000000000
    27"23"500327"9 1/2"27"42"49"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N1200000000
    36"32"500427"9 1/2"3 ft.42"59"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N1300000000
    45"41"500527"9 1/2"45"42"68"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N1400000000
     
    30" Wide Platform × 60" Deep Platform
    18"14"500227"9 1/2"18"42"70"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N1500000000
    27"23"500327"9 1/2"27"42"79"UnassembledCal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.254191N1600000000
     
    Replacements for Work Platforms
    Replacement Parts
    Image of Product. Front orientation. Work Platform Replacement Parts. Fixed Work Platforms.
    Component
    For Platform
    Dp.
    Each
    Platform30"4191N1110000000
    Platform60"4191N11200000000
    Replacement Stairs
    Image of Product. Front orientation. Work Platform Stairs. Fixed Work Platforms.
    Component
    For No.
    of Steps
    Each
    Steps24191N1170000000
    Steps34191N118000000
    Steps44191N119000000
    Steps54191N121000000
    Replacement Supports
    Image of Product. Front orientation. Work Platform Supports. Fixed Work Platforms, Support Frames.

    Support Frames

    For Max.
    Platform Ht.
    Each
    Support Frames
    18"4191N1130000000
    27"4191N114000000
    36"4191N115000000
    45"4191N116000000
     

    Nonconductive Build-Your-Own Fixed Work Platforms

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Nonconductive Build-Your-Own Fixed Work Platforms.

    Shown Assembled

    Image of System. Side1 orientation. Contains Annotated, MultipleImages. Work Platforms. Nonconductive Build-Your-Own Fixed Work Platforms.
    Configure platforms to fit your application.
    First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface.
    Stairs
    Fiberglass—These platforms are nonconductive fiberglass.
    Grit-Coated Step—For good slip resistance, stairs are grit coated.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Steps
    Mounting
    Holes
    Platform
    Ht.
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Finish
    Wt. Cap.,
    lb.
    Color
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Specs. Met
    Each
    Fiberglass
    18"11"125 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T210000000
    27"20"225 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T22000000
    36"29"325 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T23000000
    45"38"425 3/4"10 1/2"Grit Coated250GrayUnassembledYes29/16"Cal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T24000000
     
    Stair Handrails
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Ht.
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    27"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T320000000
    36"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T33000000
    45"42"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T34000000
     
    Platform Supports
    Platform supports are required at each end of a platform section. Supports must be used every 60", so 120" long platform sections also require a support in the middle.
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Mounting
    Holes
    For Platform
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Includes
    Specs. Met
    Each
    Fiberglass
    18"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T890000000
    27"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T82000000
    36"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T83000000
    45"GrayUnassembledYes29/16"4 Mounting Brackets, 2 Platform Support LegsCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T84000000
     
    Platform Sections
    Fiberglass—These platforms are nonconductive fiberglass.
    Perforated—For good slip resistance, platforms are perforated.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    30"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T410000000
    60"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T4200000000
    120"30"500PerforatedGrayUnassembledNoCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T4300000000
     
    Platform Handrails
    Platform handrails have built-in toeboards.
    Fiberglass—These platforms are nonconductive fiberglass.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Lg.
    Ht.
    Toeboard
    Ht.
    Color
    Assembly
    Mounting Hardware
    Included
    Specs. Met
    Each
    Fiberglass
    30"42"4"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T440000000
    60"42"4"YellowUnassembledYesCal/OSHA Compliant Title 8 Section 3642, OSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.296339T45000000
     

    Low-Height Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Low-Height Crossover Stairs, 1 Step.

    1 Step

    Image of Attribute. Front orientation. Contains Annotated. Crossover Stairs. Low-Height Crossover Stairs, 2 Steps.

    2 Steps

    Take the safest, shortest route over pipes and other obstacles near the ground. For stability, bolt these stairs to your floor.
    Powder-Coated Steel—Powder-coated steel stairs are both rust resistant and durable enough to withstand heavy use. They’re yellow, so they are easy to see and reduce tripping risks.
    Aluminum—Aluminum stairs are more corrosion resistant than steel stairs. They’re a good choice for damp areas, including outdoors.
    Serrated Step—The serrated steps and platform prevent slipping and allow liquids and debris to pass through.
    Specifications Met—All stairs meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp. (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Yellow Powder-Coated Steel
     
    Flat Step with Serrated Tread
    9"26 1/2"40"6 1/2"24 9/16"9"25 7/8"29"25 7/8"29"5001No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N110000000
    19"26 1/2"51"16"24 9/16"19"25 7/8"29"23 1/2"9 1/2"5002No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N12000000
     
    Aluminum
     
    Flat Step with Serrated Tread
    9"26 1/2"40"6 1/2"24 9/16"9"25 7/8"29"25 7/8"29"3001No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N13000000
    19"26 1/2"51"16"24 9/16"19"25 7/8"29"23 1/2"9 1/2"3002No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N14000000
     

    Freestanding Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Freestanding Crossover Stairs.
    Move these stairs as you update your facility layout. Unlike other crossover stairs, they do not need to be bolted to the floor. Use them to walk over pipes and conveyors. Their one-piece welded design adds even more rigidity and structural strength.
    Powder-Coated Steel—Made of powder-coated steel, these stairs are rust resistant and durable for industrial use.
    Serrated Step—These stairs have a serrated platform and steps to prevent slipping. They also allow liquids and debris to pass through.
    Nonskid Feet—Nonskid rubber feet keep them stable when crossing.
    Specifications Met—Crossover stairs meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Crossover Stairs
    Replacement Ladder Feet
    Overall
    Ground
    Clearance
    Platform
    Step
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Assembly
    Features
    Specs. Met
    Each
    Material
    Pkg.
    Qty.
    Pkg.
    Gray Powder-Coated Steel
     
    Flat Step with Serrated Tread
    5 ft.30"58"28"10"30"24"24"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N120000000Rubber
    		479975T99000000
    5 ft.30"82"28"32"30"24"48"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1500000000Rubber
    		479975T9900000
    70"30"76"38"10"40"24"24"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1300000000Rubber
    		479975T9900000
    70"30"100"38"32"40"24"48"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1600000000Rubber
    		479975T9900000
    80"30"93"48"10"50"24"24"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1400000000Rubber
    		479975T9900000
    80"30"116"48"32"50"24"48"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1100000000Rubber
    		479975T9900000
     

    Rolling Work Platforms

    Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface.
    Style 3
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 3.
    Style 3 have a handrail on only one side for unrestricted access to a conveyor or machinery.
    Aluminum—Aluminum platforms are lighter weight than steel platforms and resist corrosion.
    Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platform
    Overall
    Steps
    Max. Platform
    Ht.
    Wd.
    Dp.
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel
    Configuration
    Features
    Specs. Met
    Each
    Aluminum
     
    50" Overall Height (A)
    20"24"24"28"46"24"10 1/2"Serrated50040UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T10000000
    20"24"39 1/2"28"62"24"10 1/2"Serrated50050UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T2000000
     
    back to top