McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    62 Products

    Curved Roller Tracks for Doors, Curtains, and Strip Doors

    Image of System. Front orientation. Contains Annotated. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors.
    Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine tracks, mounting brackets, hangers, and trolleys that fit the same inside track width to create a system. Select components that will support the capacity of the door or curtain you intend to hang up.
    Tracks
    Image of Product. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Tracks, Straight Tracks.
    Image of Product. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Tracks, 90° Curved Tracks.

    Straight Tracks

    90° Curved Tracks

    Image of Specification. Beige Powder-Coated Steel. Front orientation. Contains Border. Powder-Coated Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Tracks, Beige.
    Image of Specification. Black Powder-Coated Steel. Front orientation. Contains Border. Powder-Coated Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Tracks, Black.

    Beige

    Powder-Coated

    Steel

    Black

    Powder-Coated

    Steel

    Image of Specification. Galvanized Steel. Front orientation. Contains Border. Galvanized Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Tracks.

    Galvanized

    Steel

    Select tracks based on the capacity of the door or curtain it will support.
    Powder-Coated Steel—Powder-coated steel components are durable to resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    Inside
    Lg.
    Track Radius,
    ft.
    Wd.
    Ht.
    Thk.
    Material
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    100 lb. Track Capacity
     
    Straight Tracks
    8 ft.—1 3/8"1 1/8"0.06"Galvanized Steel—No3/8"1040A21000000
    10 ft.—1 3/8"1 1/8"0.06"Galvanized Steel—No3/8"1040A22000000
     
    90° Curved Tracks
    38"21 3/8"1 1/8"0.06"Galvanized Steel—No3/8"1040A28000000
     
    600 lb. Track Capacity
     
    Straight Tracks
    10 ft.—1 3/4"2 5/16"0.19"Powder-Coated SteelBeigeNo—1862A26000000
    10 ft.—1 3/4"2 5/16"0.19"Powder-Coated SteelBlackNo—1862A304000000
     
    90° Curved Tracks
    38"21 3/4"2 5/16"0.19"Powder-Coated SteelBeigeNo9/16"1862A27000000
    38"21 3/4"2 5/16"0.19"Powder-Coated SteelBlackNo9/16"1862A303000000
    57"31 3/4"2 5/16"0.19"Powder-Coated SteelBeigeNo9/16"1862A28000000
    75"41 3/4"2 5/16"0.19"Powder-Coated SteelBeigeNo9/16"1862A29000000
     
    Brackets
    Image of Product. For 100 lb. Track Cap. Wall-Mount Support. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Wall Mount, Support.
    Image of Product. For 100 lb. Track Cap. Wall-Mount Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Wall Mount, U Joint.
    Image of Product. For 100 lb. Track Cap. Ceiling-Mount Support. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, Support.
    Image of Product. For 100 lb. Track Cap. Ceiling-Mount Suspended Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, Suspended Joint.

    For 100 lb.

    Track Cap.

    Wall-Mount

    Support

    For 100 lb.

    Track Cap.

    Wall-Mount

    Joint

    For 100 lb. Track Cap.

    Ceiling-Mount Support

    For 100 lb. Track

    Cap. Ceiling-Mount

    Suspended Joint

    Image of Product. For 100 lb. Track Cap. Ceiling-Mount Suspended Support. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, Suspended Support.
    Image of Product. For 100 lb. Track Cap. Ceiling-Mount 90° Elbow Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, 90° Elbow Joint.
    Image of Product. For 100 lb. Track Cap. Ceiling-Mount Tee Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, Tee Joint.
    Image of Product. For 100 lb. Track Cap. Ceiling-Mount U Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Ceiling Mount, U Joint.

    For 100 lb. Track

    Cap.

    Ceiling-Mount

    Suspended Support

    For 100 lb. Track

    Cap. Ceiling-Mount

    90° Elbow Joint

    For 100 lb. Track

    Cap. Ceiling-Mount

    Tee Joint

    For 100 lb. Track Cap.

    Ceiling-Mount U Joint

    Image of Product. For 100 lb. Track Cap. Beam-Mount Support. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Beam Mount, Support.
    Image of Product. For 100 lb. Track Cap. Beam-Mount Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 100 lb. Track Capacity, Beam Mount, U Joint.
    Image of Product. For 600 lb. Track Cap. Wall-Mount Adapter. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 600 lb. Track Capacity, Wall Mount, Wall-Mount Adapter.
    Image of Product. For 600 lb. Track Cap. Ceiling-Mount Support. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 600 lb. Track Capacity, Ceiling Mount, Support.

    For 100 lb.

    Track Cap.

    Beam-Mount

    Support

    For 100 lb.

    Track Cap.

    Beam-Mount

    Joint

    For 600 lb. Track

    Cap. Wall-Mount

    Adapter

    For 600 lb. Track

    Cap.

    Ceiling-Mount

    Support

    Image of Product. For 600 lb. Track Cap. Ceiling-Mount Joint. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, For 600 lb. Track Capacity, Ceiling Mount, U Joint.

    For 600 lb. Track

    Cap. Ceiling-Mount

    Joint

    Image of Specification. Beige Powder-Coated Steel. Front orientation. Contains Border. Powder-Coated Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, Beige.
    Image of Specification. Black Powder-Coated Steel. Front orientation. Contains Border. Powder-Coated Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets, Black.
    Image of Specification. Galvanized Steel. Front orientation. Contains Border. Galvanized Steel. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Brackets.

    Beige

    Powder-Coated

    Steel

    Black

    Powder-Coated

    Steel

    Galvanized

    Steel

    Choose brackets that match the capacity and material of your track. Brackets wrap around the outside of tracks to mount them in your custom layout.
    For 100 lb. Track Capacity—A support bracket is required every 4 ft. of 100-lb. capacity track.
    For 600 lb. Track Capacity—A support bracket is required every 5 ft. of 600-lb. capacity track.
    Wall Mount—Wall-mount brackets attach directly on any vertical surface.
    Ceiling Mount—Ceiling-mount brackets mount directly to ceiling joists or hang from a threaded rod.
    Beam Mount—Beam-mount brackets have an edge clamp that attaches to beam flanges.
    90° Elbow Joint Bracket and Tee Joint Bracket—90° elbow and tee brackets support runs of track that meet at a 90° angle. You can use them to corner off a space with curtains or hanging door partitions. Trolleys won’t be able to travel around corners.
    Joint Bracket—Joint brackets join two pieces of track if you want to extend runs. You can also use them as support brackets.
    Suspended Joint—Use suspended joint brackets for clearance between your track and ceiling.
    Suspended Support—Use suspended support brackets for clearance between your track and ceiling.
    Wall-Mount Adapter—Use wall-mount adapter brackets to convert a support or joint bracket into a wall-mount bracket.
    Powder-Coated Steel—Powder-coated steel components are durable to resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    Bracket Type
    For Inside
    Track Wd.
    Ht.
    Material
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    For 100 lb. Track Capacity
     
    Wall Mount
    Support1 3/8"4 5/8"Galvanized Steel—No1/4"1040A106000000
    U Joint1 3/8"4 5/8"Galvanized Steel—No1/4"1040A10500000
     
    Ceiling Mount
    Support1 3/8"1 9/16"Galvanized Steel—No3/8"1040A10800000
    Suspended Joint1 3/8"4"Galvanized Steel—No3/8"1040A2600000
    Suspended Support1 3/8"4"Galvanized Steel—No3/8"1040A2700000
    90° Elbow Joint1 3/8"4 3/8"Galvanized Steel—No3/8"1040A10100000
    Tee Joint1 3/8"4 3/8"Galvanized Steel—No3/8"1040A10200000
    U Joint1 3/8"1 9/16"Galvanized Steel—No3/8"1040A10700000
     
    Beam Mount
    Support1 3/8"4 1/8"Galvanized Steel—No3/8"1040A10400000
    U Joint1 3/8"4 1/4"Galvanized Steel—No3/8"1040A10300000
     
    For 600 lb. Track Capacity
     
    Wall Mount
    Wall-Mount Adapter1 3/4"2 1/2"Powder-Coated SteelBeigeNo9/16"1862A2400000
    Wall-Mount Adapter1 3/4"2 1/2"Powder-Coated SteelBlackYes9/16"1862A30700000
     
    Ceiling Mount
    Support1 3/4"3 15/16"Powder-Coated SteelBeigeNo9/16"1862A2200000
    Support1 3/4"3 15/16"Powder-Coated SteelBlackNo9/16"1862A30600000
    U Joint1 3/4"3 15/16"Powder-Coated SteelBeigeNo9/16"1862A21000000
    U Joint1 3/4"3 15/16"Powder-Coated SteelBlackNo9/16"1862A305000000
     
    Hangers with Hook
    Image of Product. 1 Roller. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Hangers with Hook, For 100 lb. Track Capacity, 1 Roller.

    1 Roller

    Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door or curtain. Hangers with a hook fit through holes in curtains and strip doors.
    Rollers
    Bearing
    Wt. Cap.,
    lb.
    For Inside
    Track Wd.
    Ht.
    Material
    No.
    of
    Dia.
    Material
    Type
    Hook
    Lg.
    Mounting Fasteners
    Included
    Each
    For 100 lb. Track Capacity
    251 3/8"2 7/16"Steel
    		11 1/16"PlasticRoller
    		1 3/8"No5592T9600000
    401 3/8"2 7/16"Steel
    		11 1/16"SteelRoller
    		1 7/16"No1040A2300000
     
    Hangers with Eyebolt
    Image of Product. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Hangers with Eyebolt.
    Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door or curtain. Hangers with an eyebolt use an S-hook or shackle (not included) to hang curtains or strip doors.
    Rollers
    Bearing
    Wt. Cap.,
    lb.
    For Inside
    Track Wd.
    Ht.
    Material
    No.
    of
    Dia.
    Material
    Type
    Eyebolt
    ID
    Mounting Fasteners
    Included
    Each
    For 600 lb. Track Capacity
    2251 3/4"6"Zinc-Plated Steel22 1/8"SteelRoller
    		1"No1212A8000000
    3001 3/4"6"Zinc-Plated Steel22 1/16"SteelBall
    		1 1/4"No1212A2100000
     
    Hangers with Mounting Plate
    Image of Product. Style B. Front orientation. Style B. Curved Roller Tracks for Doors, Curtains, and Strip Doors.
    Image of Product. Style C. Front orientation. Style C. Curved Roller Tracks for Doors, Curtains, and Strip Doors.

    Style B

    Style C

    Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door. Hangers with a mounting plate attach to the top of your door and extend down the side.
    Style C—Style C hangers adjust vertically between the bottom of the track and the top of the door.
    Powder-Coated Steel—Powder-coated steel components are durable to resist wear and tear over time.
    Rollers
    Bearing
    Style
    Wt. Cap.,
    lb.
    For Inside
    Track Wd.
    Ht.
    Mounting
    Plate Ht.
    Material
    No.
    of
    Dia.
    Material
    Type
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    For 600 lb. Track Capacity
    B751 3/4"3"2 23/32"Zinc-Plated Steel12 1/8"PlasticRoller
    		—No1/4"1222A1000000
    C3001 3/4"13 1/8"6 27/32"Powder-Coated Steel12 1/8"SteelBall
    		GrayYes5/16"1862A37000000
     
    Hangers with Bolt
    Image of Product. 1 Roller. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Hangers with Bolt, For 600 lb. Track Capacity, 1 Roller.
    Image of Product. 2 Rollers. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Hangers with Bolt, For 600 lb. Track Capacity, 2 Rollers.

    1 Roller

    2 Rollers

    Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door. Hangers with a bolt fasten through the top of your door. You can adjust them vertically within the bolt's thread length.
    Rollers
    Bearing
    Thread
    Wt. Cap. per
    Pair, lb.
    For Inside
    Track Wd.
    Ht.
    Max. Vert.
    Adjustment
    Material
    No.
    of
    Dia.
    Material
    Type
    Size
    Lg.
    Mounting Fasteners
    Included
    Each
    For 600 lb. Track Capacity
    3001 3/4"5 3/8"2 3/4"Steel
    		22 1/8"SteelRoller
    		1/2"-13
    		2 3/4"Yes1291A26000000
    6001 3/4"6 13/16"3 1/2"Steel
    		12 1/8"SteelBall
    		5/8"-11
    		3 1/2"Yes1862A36000000
     
    Pull Trolleys with Mounting Plate
    Image of Product. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, Pull Trolleys with Mounting Plate.
    Pull trolleys have a pull cord that makes it easier to slide tall, hard-to-reach curtains or strip doors. Bolt them onto the leading edge of the strip door or curtain.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    Rollers
    For Inside
    Track Wd.
    Ht.
    Material
    No.
    of
    Dia.
    Pull Cord
    Lg., ft.
    Mounting Fasteners
    Included
    Each
    For 100 lb. Track Capacity
    1 3/8"2 5/8"Galvanized Steel21 1/16"4Yes1040A25000000
     
    End Stops
    Image of Product. Front orientation. Door Tracks and Fittings. Curved Roller Tracks for Doors, Curtains, and Strip Doors, End Stops.
    Finish your track system with end stops. They mount inside tracks to prevent hangers from rolling off the ends.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    For Inside
    Track Wd.
    Material
    Mounting Fasteners
    Included
    Each
    For 100 lb. Track Capacity
    1 3/8"Galvanized SteelYes1040A2400000
     

    Enclosed-Track Powered Conveyor Chain Trolleys

    Image of Product. Front orientation. Conveyor Chain Trolleys. Enclosed-Track Powered Conveyor Chain Trolleys.
    Carry loads along a track with this series of smooth rolling alternating vertical and horizontal wheels. Use a carrier to attach your load to the chain. Vertical wheel axles spaced every 8" serve as attachment points for carriers. Note: Weight capacity listed is per attachment point.
    Lg.,
    ft.
    Wt. Cap. per Attachment
    Point, lb.
    Vert. Wheel
    Spacing
    Material
    Connecting
    Pin Material
    Max. Temp.,
    ° F
    Each
    201258"Steel
    		Steel4505927K340000000

    Enclosed Conveyor Tracks

    Track provides the runway for trolleys, carriers, and chain in manual and powered systems. The enclosed track protects trolleys and chain from contamination and damage. Install at least one support bracket (sold separately) every 5 feet.
    90° Curved Track
    Image of Product. Front orientation. Conveyor Tracks. 90° Curved Track.
    Ht.
    Wd.
    Track Radius,
    ft.
    Inside
    Overall
    Inside
    Opening
    Thk.
    Wt. Cap.,
    lb.
    Material
    Color
    Max. Temp.,
    ° F
    Each
    22 3/8"2 11/16"2 1/2"1"5/32"250Painted SteelBlue4505927K120000000
    32 3/8"2 11/16"2 1/2"1"5/32"250Painted SteelBlue4505927K13000000
    42 3/8"2 11/16"2 1/2"1"5/32"250Painted SteelBlue4505927K14000000

    Manual Overhead Enclosed Track Conveyor Trolleys

    Image of Product. Front orientation. Conveyor Trolleys. Manual Overhead Enclosed Track Conveyor Trolleys.
    Push to move material along the conveyor.
    Height is measured from the bottom of the track to the center of the connection holes.
    Material
    Overall
    Ht.
    For Inside
    Track Wd.
    Ht.
    Wd.
    Wheel
    Dia.
    Eye
    Dia.
    Wt. Cap.,
    lb.
    Frame
    Wheel
    Bearing
    Bearing
    Type
    Max. Temp.,
    ° F
    Each
    4 9/16"2 1/2"1 1/2"6"2.25"17/32"250IronSteelSteelBall
    		4505927K42000000

    Powered Overhead Enclosed Track Conveyor Trolley Hangers

    Image of Product. Front orientation. Contains Annotated. Conveyor Trolley Hangers.
    Hangers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes. Use where swinging loads are permitted.
    Eye
    Dia.
    Ht.
    Wd.
    (A)
    (B)
    Max.
    Incline
    Wt. Cap.,
    lb.
    Material
    Max. Temp.,
    ° F
    Each
    4 1/4"1"11/32"7/16"45°125Steel
    		4505927K2700000

    Angle Rails for V-Groove Track Rollers

    Image of Product. Front orientation. Track Rollers. Angle Rails for V-Groove Track Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Track Rollers. Angle Rails for V-Groove Track Rollers.
    Use these rails with any track rollers that have a 90° V-groove. The bottom can be drilled for mounting.
    420 Stainless Steel—420 stainless steel rails are more corrosion resistant than steel rails. Use them in areas where frequent washdowns with harsh cleaners take place.
    Rockwell C40 and Rockwell C53—Rails with a Rockwell hardness rating offer improved wear resistance over unhardened rails. The higher the hardness rating, the harder the metal.
    Overall
    Ht.
    Wd.
    Angle
    Ht.
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    4 ft.
    Long
    5 ft.
    Long
    6 ft.
    Long
    Steel
    7/16"3/16"1/8"1582T171000000000000000000000000000000000000
    5/8"1/4"3/16"1582T4000000000000000000000000000000
    7/8"11/32"1/4"1582T6000000000000000000000000000000000
    1 1/16"7/16"5/16"1582T80000000000000000000000000000000000
     
    Steel with Rockwell C53 Hardness
    5/8"1/4"3/16"1582T300000000000000000000000000000000
    7/8"11/32"1/4"1582T50000000000000000000000000000000000
    1 1/16"7/16"5/16"1582T70000000000000000000000000000000000
     
    420 Stainless Steel
    5/8"1/4"3/16"1582T1750000000000000000000000000000000000
    7/8"11/32"1/4"1582T17700000000000000000000000000000000000
     
    420 Stainless Steel with Rockwell C40 Hardness
    5/8"1/4"3/16"1582T1760000000000000000000000000000000000
    7/8"11/32"1/4"1582T17800000000000000000000000000000000000
     

    Roller Tracks for Doors

    Image of System. Front orientation. Contains Annotated. Door Tracks and Fittings. Roller Tracks for Doors.
    Combine tracks, mounting brackets, hangers, and end stops to create a system for hanging doors.
    Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
    End Stops
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, End Stops.
    End stops mount inside tracks and prevent hangers from rolling off the track to finish your system.
    Powder-Coated Steel—Powder-coated steel components are durable, so they resist wear and tear over time.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Color
    Each
     
    Powder-Coated Steel
    4001 3/4"Beige1207A657000000
    4001 3/4"Black1207A65900000
    6002 1/4"Beige1207A65800000
    6002 1/4"Black1207A66100000
     
    Zinc-Plated Steel
    4001 3/4"—1207A66200000
    6002 1/4"—1207A66300000
     

    Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains

    Image of ProductInUse. Curtain Not Included. Front orientation. Door Tracks and Fittings. Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains.

    Curtain Not Included

    Build your own system for hanging doors and curtains in marine environments. Tracks are anodized aluminum, and hangers are 316 stainless steel for corrosion resistance. Combine tracks, hangers, joints, and accessories for a complete system.
    End Stops
    Image of Product. Front orientation. Door Tracks and Fittings. Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains, End Stops.
    End stops have a spring-loaded plunger that locks them in place to prevent hangers from sliding off tracks.
    Material
    Color
    Each
    For 550 lb. Track Capacity
    Anodized AluminumBlack9484T11000000
     
    For 1,400 lb. Track Capacity
    300 Series Stainless Steel—9484T1300000
     

    Enclosed Conveyor Track Brackets

    Image of ProductInUse. Front orientation. Conveyor Track Brackets. Support Bracket.
    Image of ProductInUse. Front orientation. Conveyor Track Brackets. Joint Bracket.

    Support Bracket

    Joint Bracket

    Use brackets to hang and join sections of enclosed track. They have a hole in the top for hanging from threaded rod.
    Support Bracket—Support brackets hold track in place with nuts (not included) on threaded rod.
    Joint Bracket—Joint brackets connect two sections of track when tightened with the included bolts.
    Ht.
    For Inside
    Track Wd.
    Material
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Mounting Location
    Max. Temp.,
    ° F
    Each
    Support Bracket
    4 1/2"2 1/2"Steel
    		No1/2"Ceiling, Threaded Rod4505927K19000000
     
    Joint Bracket
    4 7/16"2 1/2"Steel
    		Yes1/2"Ceiling, Threaded Rod4505927K18000000
     
    back to top