Mitutoyo Electronic Depth Gauges
All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Depth Gauges | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | Replacement Cases | |||||||||||||
| Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | Each | ||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 9 1/4" | Yes | 571-211-30 | 000000000 | 0000000 | 0000000 | 000000 |
| 0"-8" | 0 mm-200 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 11 1/4" | Yes | 571-212-30 | 000000000 | 000000 | 0000000 | 00000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 15 7/8" | Yes | 571-213-10 | 000000000 | 000000 | 000000 | 00 |
Mitutoyo Electronic Depth Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Depth Gauges | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | Replacement Cases | |||||||||||||
| Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | Each | ||
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 9 1/4" | Yes | 571-211-30 | 000000000 | 0000000 | 0000000 | 000000 |
| 0"-8" | 0 mm-200 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 11 1/4" | Yes | 571-212-30 | 000000000 | 000000 | 0000000 | 00000 |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 15 7/8" | Yes | 571-213-30 | 000000000 | 000000 | 000000 | 00 |
Economy Electronic Depth Gauges with Extension Rods
Connectable extension rods allow you to measure depths up to 22". This gauge has a zero-set button, which allows you to start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | Material | Overall Ht. | Batteries Included | Includes | Each | |
| 0"-22" | 0 mm-550 mm | ±0.001" | ±0.03 mm | 0.0005" | 0.01 mm | 4" | 0.63" | 6 | 1", 2", 3", 4", 5", 6" | 11/64" | Steel | 11" | Yes | One 1" Long × 0.078" Diameter Contact Point, One 1" Long Needle Contact Point | 0000000 | 0000000 |
| Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Harsh Environment Mitutoyo Electronic Depth Gauges
IP67 rated for protection from dust and temporary water submersion. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Stainless Steel | 4" | 11/16" | Stainless Steel | 9 1/4" | Yes | 571-261-20 | 000000000 | 0000000 |
| Lg. | Each | ||
| USB Data Cable | 80" | 000000 | 0000000 |
| 10-Pin Data Cable | 40" | 00000000 | 000000 |
| 10-Pin Data Cable | 80" | 00000000 | 000000 |
| Wireless Data Transmitter | 1 3/4" | 000000 | 000000 |
| Wireless Data Receiver | 5 1/2" | 000000 | 000000 |
| Base Extension | 7" | 0000000 | 00000 |
| Base Extension | 12" | 0000000 | 00000 |
| Replacement Case | __ | 0000000 | 00000 |
| Replacement Battery | __ | 00000000 | 0000 |
Harsh Environment Mitutoyo Electronic Depth Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. All are IP67 rated for protection from dust and temporary water submersion. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Stainless Steel | 4" | 11/16" | Stainless Steel | 9 1/4" | Yes | 571-261-20 | 000000000 | 0000000 |
| Lg. | Each | ||
| USB Data Cable | 80" | 000000 | 0000000 |
| 10-Pin Data Cable | 40" | 00000000 | 000000 |
| 10-Pin Data Cable | 80" | 00000000 | 000000 |
| Wireless Data Transmitter | 1 3/4" | 000000 | 000000 |
| Wireless Data Receiver | 5 1/2" | 000000 | 000000 |
| Base Extension | 7" | 0000000 | 00000 |
| Base Extension | 12" | 0000000 | 00000 |
| Replacement Case | __ | 0000000 | 00000 |
| Replacement Battery | __ | 00000000 | 0000 |
Mitutoyo Electronic Depth Micrometers
Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | O'all Ht. | Batteries Included | Mfr. Model No. | Each | |
Ratchet Thimble | |||||||||||||||
| 0"-6" | 0-150 mm | ±0.00012" | ±0.003 mm | 0.00005" | 0.001 mm | 4" | 5/8" | 6 | 1", 2", 3", 4", 5", 6" | 5/32" | 12 3/4" | Yes | 329-350-30 | 00000000 | 0000000 |
| 0"-12" | 0-300 mm | ±0.00012" | ±0.003 mm | 0.0001" | 0.001 mm | 4" | 5/8" | 12 | 1", 2", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12" | 5/32" | 18" | Yes | 329-351-30 | 00000000 | 000000 |
Mitutoyo Electronic Depth Micrometers with Calibration Certificate
These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | O'all Ht. | Batteries Included | Mfr. Model No. | Each | |
Ratchet Thimble | |||||||||||||||
| 0"-6" | 0-150 mm | ±0.00012" | ±0.003 mm | 0.00005" | 0.001 mm | 4" | 5/8" | 6 | 1", 2", 3", 4", 5", 6" | 5/32" | 12 3/4" | Yes | 329-350-30 | 00000000 | 0000000 |
| 0"-12" | 0-300 mm | ±0.00012" | ±0.003 mm | 0.0001" | 0.001 mm | 4" | 5/8" | 12 | 1", 2", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12" | 5/32" | 18" | Yes | 329-351-30 | 00000000 | 000000 |
Water-Resistant Economy Electronic Depth Micrometers
IP54 rated for limited protection from dust and splashing water. Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button allows you to start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Measuring Blade Material | Wd. | Lg. | Material | No. of | Lg. | Dia. | Overall Ht. | Batteries Included | Each | |
Ratchet Thimble | ||||||||||||||||
| 0"-6" | 0 mm-150 mm | ±0.0001" | ±0.0025 mm | 0.00005" | 0.001 mm | Steel | 4" | 11/16" | Steel | 6 | 1", 2", 3", 4", 5", 6" | 3/16" | 5 1/2" | Yes | 000000 | 0000000 |
| Replacement Battery | 00000000 | Each | 00000 |