We will reply to your message within an hour.
Remove scale and mineral deposits without damaging aluminum, brass, and other soft metals commonly found in pumps and heat exchangers.
Remove scale from water-cooled condensers, chillers, and non-potable water boilers.
Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.
Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.
In addition to cleaning steam and hot water boilers, these conditioners control foam and pH levels to improve boiler efficiency and reduce energy costs.
Remove rust, dirt, and varnish from air-powered equipment to keep it running longer.
Clean rust and lime deposits such as calcium and scale from HVAC systems, coolers, tools, and vehicles.
Dissolve mineral deposits and erase stains in toilets and urinals with these acid-based cleaners.
Use these cleaners to remove dirt, grime, and stains from most surfaces.
Clean and deodorize with every flush with these in-tank cleaners. Each container lasts approximately 2,000 flushes.
Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue.
These restorers remove weld scale, discoloration, black oxides, and other impurities from stainless steel (also known as pickling) while restoring the corrosion-resistant chromium layer.
Remove lime and hard-water stains with these nonfoaming cleaners. They can be used on most surfaces, including metal and plastic.
These needles are steel or stainless steel.
These needles are beryllium copper.
Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter.
The included adapter lets you use chisels in these scalers.
With no internal springs to break, these tools provide consistent performance.
Change the blows-per-minute by varying the pressure on the speed control.
The included adapter lets you use chisels in these scalers. Change the blows-per-minute by varying the pressure on the speed control.
These scalers produce 80-90% less vibration than other scaling tools.
Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Use with Air-Powered Needle Scalers/Chiseling Hammers.
From acid to xylene, these dry and liquid chemicals are useful in a wide range of industrial applications.
Protect process and food equipment from damage caused by hard water. These softeners remove minerals from hard water that can cause scale formation.
Use these cartridges in a diesel fuel generator to filter contaminants.
Replace your cartridge less frequently—these are pleated, which provides a large surface area for high debris retention.
These filter housings are made of durable zinc and clear plastic, so you can monitor collecting debris without stopping flow.
These filter housings come with a cartridge that removes particles, rust, scale, and sediment from gasoline and diesel fuel, including fuels with ethanol.