Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

Plastic clamping surfaces prevent damage to material.

These clamps are made of stainless steel for excellent corrosion resistance.

Lighter weight than other metal clamps, these are less likely to bend thin material.

The clamp body is extra-slim to fit into narrow openings.

The jaws move in unison to apply even pressure and prevent twisting.

Apply pressure to the side of a workpiece as well as the top and bottom.

Push or pull the plunger to hold your workpiece from the side.

Hold workpieces of different thicknesses without adjustment.

Smaller than standard push toggle clamps, these are often used for electronics and small fixturing applications.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Push the lever to lock the handle and prevent accidental opening.

The plunger can be locked at any position along its travel.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Push the lever to lock the handle and prevent accidental opening.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Two sets of mounting holes allow mounting on the bottom or side.

Mount these clamps below a surface.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

Replace worn screws or customize your clamps.

Attach one of these nonmarring rubber or plastic tips to prevent a metal holding screw from damaging workpiece surfaces.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Fit the draw arm over a latch plate and pull the handle to clamp.

Push the lever to lock the handle and prevent accidental opening.

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

Angled jaws clamp sheets, bars, and U-channels at 90°.

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

Turn the knob to adjust the opening size.

For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handles to secure and release workpieces.

Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.

Press the lever to lock the clamp onto material.

Extend the handle to reach the clamp into tight spaces.

The long, narrow jaws clamp farther into a workpiece and in tight spots.

These clamps meet DIN VDE 0680-1 for protection against accidental contact with live electrical circuits.

Clamp up to three workpieces at 90° angles.

With five times the capacity of standard corner clamps, these secure two workpieces at a 90° angle.

An alternative to setup clamps, these heavy duty clamps have high holding power to secure workpieces during machining.

Use with T-slot nuts or bolts and a support to secure a workpiece, vise, or fixture to a machine table.

Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

Unlike other setup clamps that grip the horizontal surface of a workpiece, these clamps have a pivoting ball in the tip to get a firm hold on angled parts.

Designed to provide more clearance above the nut than standard clamps, these have an offset shape. Also known as gooseneck clamps.

Get everything needed for basic workholding on a machine table.

Use these blocks to support setup clamps. Fit the nonslip steps together for quick height adjustments.

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

Also known as toe clamps, these grip the side of a workpiece to leave the top free for machining.

Each arm has a handle for turning the magnets on and off.

Two clamps connected by a pivoting arm hold workpieces at nearly any angle.

Clamp workpieces from the outside at a 90° angle, leaving the inside free for welding or fabrication.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

All adjustments can be made from one end, allowing clamping in tight spaces.

For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps.

Hold up to five times the capacity of standard bar clamps. These are also known as I-beam clamps.

The clamping arm slides freely along the bar for quick, one handed positioning. Tighten the screw onto a workpiece and the arm locks in place.

Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas.

Attach to your bar clamp to hold material on three sides.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Insert these clamps into drilled holes in sheet material to grip and align when riveting or welding.

Hold pipe and fittings together for tack welding.

Each jaw can be positioned at an angle to hold round, angled, and odd-shaped material.

Screw these clamps directly into a tapped hole in a fixture.

Secure a workpiece from the inside, leaving the outside clear for machining.

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Machine these fixture clamps to match the contours of your workpiece for a stronger grip.

Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces.

These clamps wedge against the workpiece ID to grip cast, unfinished, or uneven parts, leaving the outside clear for machining.

Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.

The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces.

When loosened, you can spin the body of this clamp around its mounting point for better access to the workpiece.

Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.

Made of 304 stainless steel to stand up to washdown environments, such as food and beverage production, these are the most corrosion-resistant vises we offer.

Designed for outdoor use, these vises have a finish that resists corrosion.

A bright yellow vise body stands out on the shop floor.

For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

The movable jaw can be repositioned to extend the jaw opening. Pull out the entire sliding section and insert it on the opposite side of the vise.

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.