We will reply to your message within an hour.
This saw has a high-torque motor that powers a larger blade than the lightweight Skil electric circular saw.
About 25% lighter than the standard Skil electric circular saw, this lightweight saw reduces fatigue during prolonged cutting.
Cut wood, plywood, and particleboard.
Square-shaped teeth cut across the grain and with the grain (ripping) in reclaimed lumber and flooring with embedded nails.
Use these blades for occasional cutting.
A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene.
The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.
Use these blades with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.
A continuous edge on these blades produces smooth cuts.
The edge of the blade is segmented to cut faster than a continuous edge.
A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete.
Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.
Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron.
Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.
Convert a diamond arbor hole to a round arbor hole.
These blades have a continuous edge with diamond grit to cut through ceramics.
The segmented edge on these blades is coated with diamond grit for cutting plastic.
Use these blades with water or coolant to produce a smooth cut and minimize heat buildup
The blade edge is coated in diamond grit.
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer.
Blades are stainless steel with a diamond-grit edge that cuts hard, abrasive materials such as carbon fiber, ceramics, masonry, glass, composites, quartz, and silicon.
The diamond grit bonded to the edge of these steel blades lasts up to 30 times longer and cuts twice as fast as carbide grit.
Make cuts in hard, brittle materials such as firebrick, stone, and concrete.
Made with diamond, the strongest abrasive material, these wheels are extremely hard and wear resistant, so they stand up to ceramics and glass.
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
The edge of the blade is coated with diamond grit, which lasts longer than carbide grit.
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.
Swap accessories quickly and safely without tools.