Die Sets

Filter by

System of Measurement

Thread Size

Length

Height

For Use On

Thread Type

Die Sizes Included

1 1/8"-7 (1 5/8" Wd.)

1 1/4"-12 (1 3/4" Wd.)

1 1/4"-7 (1 3/4" Wd.)

1 1/8"-12 (1 5/8" Wd.)

1/2 (1 5/8" Wd.)

1/2"-13

1/2"-13 (1 1/16" Wd.)

Shape

Material

Clearance

Thread Pitch

Thread Direction

For Hole Type

Number of Pieces

Component

Pipe Size

RoHS

Container Type

Export Control Classification Number (ECCN)

Tap Sizes Included

Application

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

REACH

Chamfer Type

79 Products

Heavy Duty Die Sets for Presses

Hot-rolled steel press plates and hardened steel bushings give these die sets the strength to handle punching and metal forming applications. Use them with manual, powered, and hydraulic presses.

				Mounting Slots
Lg.	Wd.	Clearance	Ht.	No. of	Wd.	Material		Each
6 9/16"	6 3/4"	3 3/8"	6"	2	3/4"	Steel	2493A51	0000000
6 3/4"	8"	3 3/8"	6"	2	3/4"	Steel	2493A52	000000
7 3/4"	8"	3 1/4"	6"	2	3/4"	Steel	2493A53	000000
10 3/4"	12"	3 1/4"	6"	2	3/4"	Steel	2493A61	00000000

Die Sets for Presses

Use in assembly operations and light stamping work. They work with manual, powered, and hydraulic presses.

Lg.	Wd.	Clearance	Ht.	Material		Each
2 7/8"	3 1/2"	2"	3 1/2"	Steel	2395A36	0000000
3 3/4"	5"	3 1/4"	5"	Steel	2395A37	000000
4 3/8"	6 1/2"	2 5/8"	5"	Steel	2395A38	000000
5"	8 1/2"	3 3/4"	6 3/4"	Steel	2395A39	000000
6"	9 1/2"	3 3/4"	6 3/4"	Steel	2395A41	000000
7"	10 3/8"	3 3/4"	6 3/4"	Steel	2395A42	000000

Tap and Die Sets

Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.

Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.

High-Speed Steel—High-speed steel taps and dies last longer than carbon steel when used on similar material.

Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.

Round—Round dies are for cutting threads. Use them with wrenches for round dies.

	Die Shape	Die Sizes Included	Wd.	Container Type	Includes		Each
Carbon Steel Taps and Dies







	Right-Hand Thread

	12	1/8, 1/4, 3/8, 1/2, 3/4, 1	Taper	Hex	1/8"-27, 1/4"-18, 3/8"-18, 1/2"-14, 3/4"-14, 1"-11 1/2	1 1/16", 1 1/4", 1 7/16", 1 5/8", 2", 2 3/8"	Plastic Case	—	2549A76	0000000


	24	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug, Taper	Hex	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	1"	Plastic Case	Die Wrench, Tap Wrench	2631A5	000000
	24	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	1"	Plastic Case	Die Wrench, Tap Wrench	26025A41	000000
	25	M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm	Plug	Hex	M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm	1 7/16", 1 13/16"	Plastic Case	Die Wrench (2), Tap Wrench	26025A42	000000
	40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	2625A12	000000
	40	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	Plug, Taper	Hex	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	2668A36	000000
	40	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	2647A12	000000
	52	1/4"-19, 1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm	Plug, Taper	Hex	1/8"-28, 1/4"-19, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm	1", 1 7/16"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	2726A66	000000
	53	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1/4"-18	Plug, Taper	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Screwdriver, Tap Wrench (3), Thread Gauge	25955A6	000000
	65	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14, 1/4"-18	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-14, 7/8"-9, 1"-8, 1"-14	5/8", 1", 1 7/16", 1 13/16"	Plastic Case	Die Wrench (4), Tap Wrench (4), Thread Gauge	26075A71	000000
	65	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm	5/8", 1", 1 3/16", 1 7/16", 1 13/16"	Plastic Case	Die Wrench (4), Tap Wrench (4), Thread Gauge	2726A68	000000


	High-Speed Steel Taps and Dies







					Right-Hand Thread

					19	M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	Plug	Round	M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm	—	Metal Case	Die Wrench, Screwdriver, Tap Wrench (2), Thread Gauge	2646A14	000000


					40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	Plug	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20	1"	Plastic Case	Die Wrench, Screwdriver, Tap Wrench (3), Thread Gauge	26055A64	000000
					58	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1/4"-18	Plug	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Extractor (5), Screwdriver, Tap Wrench (3), Thread Gauge	26055A74	000000


					High-Speed Steel Taps and Carbon Steel Dies







									Right-Hand Thread

									12	1/8, 1/4, 3/8, 1/2, 3/4, 1	Taper	Hex	1/8"-27, 1/4"-18, 3/8"-18, 1/2"-13, 3/4"-14, 1"-11 1/2	25/32", 1 1/16", 1 1/4", 1 5/8", 1 13/16", 2 3/16"	Plastic Case	—	2549A78	000000

Quick-Setup Die Sets for Presses

These dies have a plate on top of the upper die and a ½"-13 tool adapter that connects the die and ram for quick setup. Use them with manual, powered, and hydraulic presses for assembly operations and light stamping work.

					Tool Adapter
Lg.	Wd.	Clearance	Ht.	Material	Lg.	Thread Size	Features		Each
2 7/8"	3 1/2"	2"	3 1/2"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A46	0000000
3 3/4"	5"	3 1/4"	5"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A47	000000
4 3/8"	6 1/2"	2 5/8"	5"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A48	000000
5"	8 1/2"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A49	000000
6"	9 1/2"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A51	000000
7"	10 3/8"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	2395A52	000000

Thread-Repairing Die Nut Sets

The dies in these sets match the width of hex nuts that are the same thread size, so one tool can turn both. For tight spaces, use with a ratcheting wrench since it requires minimal clearance to turn. Repairing dies remove imperfections and rust so threads engage properly for a strong connection.

	Thread Size	Thread Type	No. of Files	Wd.	Container Type		Each
Uncoated Carbon Steel



	5	3/4"-10, 7/8"-9, 1"-8, 1 1/8"-7, 1 1/4"-7	UNC	—	1 1/16", 1 1/4", 1 1/2", 1 5/8", 1 3/4"	Plastic Pouch	2667A19	000000


	5	3/4"-16, 7/8"-14, 1"-14, 1 1/8"-12, 1 1/4"-12	UNF, UNS	—	1 1/16", 1 1/4", 1 1/2", 1 5/8", 1 3/4"	Plastic Pouch	2667A21	00000
	5	M6, M7, M8, M10, M12	Metric	—	11 mm, 14 mm, 18 mm, 19 mm	Plastic Pouch	2667A32	0000
	7	1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11	UNC	—	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16"	Plastic Pouch	2667A11	00000
	7	1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18	UNF	—	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16"	Plastic Pouch	2667A12	00000
	8	1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10	UNC	—	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16", 1 1/8"	Plastic Pouch	2667A13	00000
	8	1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18, 3/4"-16	UNF	—	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16", 1 1/8"	Plastic Pouch	2667A14	00000
	12	M6, M8, M10, M12, M14	Metric	1	11 mm, 14 mm, 18 mm, 19 mm, 21 mm	Plastic Case	2616A22	00000
	14	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18	UNC, UNF	1	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16"	Plastic Case	2616A19	00000
	16	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16	UNC, UNF	2	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16", 1 1/16"	Plastic Case	2616A21	00000

Thread-Repairing Die Sets

Be ready for repairs by keeping a range of die sizes on hand. These dies smooth out flaws and remove dirt and rust so threads make strong connections. Don’t risk damaging threads further with an inferior quality die. Our dies are machined in the U.S. to precise dimensions for a perfect thread profile. Turn with a hex die wrench or a standard adjustable wrench.

Uncoated Carbon Steel—Hard and wear resistant for a long life, these dies work well on both metal and plastic.

	Thread Size	Thread Type	Wd.	Container Type		Each
Uncoated Carbon Steel



	7	M6, M8, M10, M12, M14, M16, M20	Metric	19/32", 11/16", 7/8", 1 1/16", 1 1/4", 1 5/8"	Plastic Case	8316A21	0000000


	8	1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10	UNC	19/32", 11/16", 25/32", 7/8", 1 1/16", 1 1/4", 1 7/16"	Plastic Case	2575A2	000000
	10	1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10, 7/8"-9, 1"-8	UNC	19/32", 11/16", 25/32", 7/8", 1 1/16", 1 1/4", 1 7/16", 1 5/8", 1 13/16"	Plastic Case	2575A3	000000
	20	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14	UNC, UNF	19/32", 11/16", 25/32", 7/8", 1 1/16", 1 1/4", 1 7/16", 1 5/8", 1 13/16"	Plastic Case	2575A7	000000

Tap, Die, and Drill Bit Sets

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.

Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

	Drill Bit Sizes Included	Container Type	Includes	Tap Chamfer Type		Each
Carbon Steel







	Right-Hand Thread

	117	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, Z	Plastic Case	Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)	Taper, Plug	82955A11	0000000

Pipe and Conduit Thread-Repairing Die Sets

Keep a range of die sizes on hand to repair and remove rust from pipe and conduit threads. Don’t risk damaging threads further with an inferior quality die. Our dies are machined in the U.S. to precise dimensions for a perfect thread profile. Turn them with a hex die wrench or a standard adjustable wrench.

Uncoated Carbon Steel—Hard and wear resistant for a long life, these dies work well on both metal and plastic.

					Uncoated Carbon Steel
No. of Dies	Pipe Size	Thread Type	Wd.	Container Type		Each



	6	1/8, 1/4, 3/8, 1/2, 3/4, 1	NPT	1 1/16", 1 1/4", 1 7/16", 1 5/8", 2", 2 3/8"	Plastic Case	2557A66	0000000

Tap, Die, and Thread File Sets

Repair screw threads in a wide range of sizes. The dies are hex shaped for use with conventional wrenches. The taps have a square shank that's compatible with tap wrenches and tap holders for drill presses and drilling machines. With a plug chamfer, all taps have 3-5 chamfered threads and are suitable for thread repair in both through holes and closed-end holes.

	File Sizes Included	Container Type		Each
Carbon Steel







	Right-Hand Thread

	48	1/2"-13, 1/2"-20, 1/4”-20, 1/4”-28, 3/8"-16, 3/8"-24, 5/16"-24, 5/16”-18, 7/16"-14, 7/16"-20, 9/16"-18, 9/16”-12, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.50 mm	1/2"-13, 1/2"-20, 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24, 5/8"-11, 5/8"-18, 7/16"-14, 7/16"-20, 9/16"-12, 9/16"-18, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.50 mm	For 0.75 to 3 mm thread pitches, For 11 to 24 threads per inch	Plastic Case	25325A15	0000000

A variety of sizes for adding fastener threads to studs and rods. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency. Dies are adjustable, so you can create a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.

Uncoated Carbon Steel—Our most economical dies, these are good for jobs that pop up. They work on most metal and plastic but will dull faster than high-speed steel dies.

Uncoated High-Speed Steel—The most versatile dies stay sharp and cut cleanly, even if you use them every day. They last much longer than carbon steel dies and you won’t have to work as hard to create threads.

	Dies						Die Wrenches
	No. of Dies	Thread Size	Thread Type	Container Type		Each		Each
Uncoated Carbon Steel







				13/16" OD

				6	2-56, 3-48, 4-40, 5-40, 6-32, 8-32	UNC	Plastic Case	2576A82	0000000	25565A19	00000


				6	2-64, 3-56, 4-48, 5-44, 6-40, 8-36	UNF	Plastic Case	2576A86	000000	25565A19	0000




						1" OD

						4	10-32, 1/4"-28, 5/16"-24, 3/8"-24	UNF	Plastic Case	2576A85	000000	25565A21	0000


						6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, 3/8"-16	UNC	Plastic Case	2576A84	000000	25565A21	0000


						Uncoated High-Speed Steel







										13/16" OD

										6	5-40, 6-32, 8-32, 10-24, 1/4"-20, 5/16"-18	UNC	Plastic Case	2602A95	000000	25565A19	0000


										6	5-44, 6-40, 8-36, 10-32, 1/4"-28, 5/16"-24	UNF	Plastic Case	2602A96	000000	25565A19	0000




												1" OD

												4	10-32, 1/4"-28, 5/16"-24, 3/8"-24	UNF	Plastic Case	2602A98	000000	25565A21	0000


												6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, 3/8"-16	UNC	Plastic Case	2602A97	000000	25565A21	0000

Two-Piece Thread-Repairing Die Sets

Restore threads anywhere along the length of a bolt, stud, or rod with sets that include a wide variety of sizes. Since you clamp these dies into place, they're often used on extra-long fasteners or when you can't access the end of your workpiece. Dies smooth damage and clean threads so connections stay secure. Turn them with a hex die wrench or a standard adjustable wrench.

Black-Oxide Tool Steel—Hard and wear resistant for long life, these dies work well on both metal and plastic.

	Thread Size	Thread Type	Wd.	Container Type		Each
Black-Oxide Tool Steel



	20	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14	UNC, UNF	1", 1 3/8", 1 3/4"	Plastic Case	8335A81	0000000

Ridgid Pipe Threader Sets

Each set includes a ratchet with handle, die heads, and dies. Use them to cut NPT threads in steel pipe and conduit by hand.

Standard Die Head—Standard die heads have a round bottom.

Enclosed Die Head—Enclosed die heads keep chips out for smooth operation and have a squared bottom.

	Pipe Threaders								Cases
	Mfr. Model No.	For Pipe Size	For Threads per In.	Die Material	Handle Lg.	Includes		Each		Each
For NPT Right-Hand Thread







				Standard Die Head

				00-R	1/8, 1/4, 3/8, 1/2, 3/4, 1	11 1/2, 14, 18, 27	Alloy Steel	18 7/8"	Ratchet with Handle, Six Die Heads, Six Alloy Steel Dies for Steel	2536A49	0000000	2536A42	0000000


				00-R	1/2, 3/4, 1	11 1/2, 14	Alloy Steel	18 7/8"	Ratchet with Handle, Three Die Heads, Three Alloy Steel Dies for Steel	2536A67	000000	2536A42	000000
				12-R	1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2	11 1/2, 14, 18, 27	Alloy Steel	23 7/8"	Ratchet with Handle, Nine Die Heads, Nine Alloy Steel Dies for Steel, Plastic case	2536A71	00000000	2536A43	000000
				12-R	1/2, 3/4, 1, 1 1/4	11 1/2, 14	Alloy Steel	23 7/8"	Ratchet with Handle, Four Die Heads, Four Alloy Steel Dies for Steel, Plastic case	2536A68	000000	2536A43	000000
				12-R	1/2, 3/4, 1, 1 1/4, 1 1/2, 2	11 1/2, 14	Alloy Steel	23 7/8"	Ratchet with Handle, Six Die Heads, Six Alloy Steel Dies for Steel, Plastic case	2536A73	00000000	2536A43	000000




						Enclosed Die Head

						11-R	1/2, 3/4, 1, 1 1/4	11 1/2, 14	Alloy Steel	23 7/8"	Ratchet with Handle, Four Die Heads, Four Alloy Steel Dies for Steel	2569A26	000000	———	0

Tap and Die Wrench Sets

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench. The attachable sliding T-handle moves from side to side for accessing tight spaces.

No. of Pieces	Includes	Tap Sizes Included	Die Sizes Included	Container Type
5	Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	—	—	Plastic Case	8340A21
42	Die Spacer Adapter Metric Feeler Gauge 17 Taps 17 Dies 4 mm Hex L-Key Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	Plastic Case	8340A23
77	Die Spacer Adapter Metric Feeler Gauge 34 Taps 34 Dies 4 mm Hex L-Key Inch Feeler Gauge Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	Plastic Case	8340A24
114	5 Extractors Metric Feeler Gauge 48 Taps 48 Dies 4 mm Hex L-Key Inch Feeler Gauge Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Locking Tap Adapter for Tap Sizes 9/16" to 3/4" Die Adapter for 1" Wide Hex Dies Die Adapter for 1 7/16" Wide Hex Dies 3/8 Drive Female Extension Adapter 3/8 Drive Male Extension Adapter (2) Ratcheting Wrench with Attachable Sliding T-Handle	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm	Plastic Case	8340A22

Hole Flaring Dies


10 Pieces	16 Pieces	Flared Hole

Create flares around already-cut holes in sheet metal up to _3/16" thick to make the edges stronger and more rigid. Also known as dimple dies. Press a male and female die together using a hydraulic press. When you don’t have access to a hydraulic press or your material won’t fit in a press, bolt the dies together. For making multiple flares quickly, use a hydraulic knockout punch driver. Dies are made of hardened steel for strength and durability.

	Includes	For Hole Dia.	OD	For Max. Steel Thk.	For Pipe Size		Each
For Aluminum, Brass, Copper, Stainless Steel, Steel



	10	5 Male Dies and 5 Female Dies	1 1/8", 1 3/8", 1 5/8", 1 7/8", 2 3/8"	2 3/8", 2 3/4", 3 1/4", 3 3/8", 4 1/4"	3/16"	3/4, 1, 1 1/4, 1 1/2, 2	3423N62	0000000


	16	8 Male Dies and 8 Female Dies	1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2"	1 1/4", 1 1/2", 2", 2 3/8", 2 3/4", 3 1/8", 3 3/8", 4 1/4"	3/16"	—	3423N61	000000

Left-Hand Thread-Repairing Die Nut Sets

Repair a range of left-hand thread sizes with the same wrenches used to remove nuts. The dies in these sets match the width of hex nuts with the same thread size, so one tool can turn both. By repairing left-hand fasteners, you avoid the hassle and cost of replacing them. Dies smooth damage and clean threads to ensure connections stay secure.

	Thread Size	Thread Type	Wd.	Container Type		Each
Uncoated Carbon Steel



	7	1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11	UNC	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16"	Plastic Pouch	2667A15	000000


	7	1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18	UNF	7/16", 1/2", 9/16", 11/16", 3/4", 7/8", 15/16"	Plastic Pouch	2667A16	00000

Wire and Cable Crimper Dies

Attach these dies to your cordless crimper to secure compression lug and butt splice connectors onto cable. They’re easy to swap out, so you can quickly crimp across a range of connector sizes.

Sold as Sets

		For Wire				6 tonf Compression Force		12 tonf Compression Force
	No. of Pieces	Ga.	Construction	Material	Container Type		Each		Each
For Copper Connectors



		15	8, 6, 4, 2, 1, 1/0, 2/0, 3/0, 4/0, 250 MCM, 300 MCM, 350 MCM, 400 MCM, 500 MCM, 600 MCM	Stranded	Steel	Plastic Case	4972N11	000000000	———	0


		15	6, 4, 2, 1, 1/0, 2/0, 3/0, 4/0, 250 MCM, 300 MCM, 350 MCM, 400 MCM, 500 MCM, 600 MCM, 750 MCM	Stranded	Steel	Plastic Case	———	0	4972N13	000000000


		For Aluminum Connectors



				12	8, 6, 4, 2, 1, 1/0, 2/0, 3/0, 4/0, 250 MCM, 300 MCM, 350 MCM	Stranded	Steel	Plastic Case	4972N12	00000000	———	0


				15	6, 4, 2, 1, 1/0, 2/0, 3/0, 4/0, 250 MCM, 300 MCM, 350 MCM, 400 MCM, 500 MCM, 600 MCM, 750 MCM	Stranded	Steel	Plastic Case	———	0	4972N14	00000000