A digital display allows for easy reading of measurements.

Gauges have a digital display for easy reading of measurements.

Read pressure directly at the source and send data remotely with one device.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Adhere to safety standards and monitor pressure when working with high concentrations of oxygen.

Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.

Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring.

Convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.

Get the flexibility of a differential pressure transmitter and a switch in one. These transmitters can work as a traditional transmitter using an analog output but also have electronic switch outputs and IO Link compatibility, making them great for advanced automation applications.

Gauges have an accuracy of ±0.25%.

These gauges have a glycerin-filled dial to reduce needle flutter for precise readings in high-vibration applications.

All-stainless steel construction makes these gauges suitable for testing and calibrating in corrosive environments.

Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.